Assessment of coastal bio-resources of the Palk Bay,India, using IRS-LISS-III data

Coastal resources viz., coral reefs, seagrasses, mangroves, and coastal land features viz., sandy beach, mudflats and salt pan/aquaculture ponds were classified and assessed in the Palk Bay region of the south-east coast of India using IRS LISS III satellite image (1996, 2000, 2002 and 2004). The study recorded an areal coverage of 286.95 ha of reef area during 2004, which is 177.54 ha lesser than that of the reef area of 1996. The reef vegetation composed mainly of seaweeds has gained over 29.44 ha during the same period. Likewise, sand over reef area has also increased alarmingly i.e. 120.34 ha between 1996 and 2004. The seagrass beds of Munaikkadu region of the Palk Bay are comparatively protected and have gained over 7.5 ha between 1996 and 2004. It has been found that both the dense (2.99 ha) and sparse (36.45 ha) mangroves have gained their areal coverage considerably between 1996 and 2004. Whereas in Devipattinam region, many anthropogenic pressures are exerted only on the seagrass resources which has led to the reduction of over 785.5 ha of dense seagrass beds between 1996 and 2004. The study clearly indicated that the resources are under the pressures of low to high threats, especially the coral reefs and seagrasses, if the pressures continue, coastal resources of the Palk Bay may face serious threats of destruction in this part of the Bay in the years to come.     

A bias-free geodetic boundary value problem approach to height datum unification

A geodetic boundary value problem (GBVP) approach has been formulated which can be used for solving the problem of height datum unification. The developed technique is applied to a test area in Southwest Finland with approximate size of 1.5° × 3° and the bias of the corresponding local height datum (local geoid) with respect to the geoid is computed. For this purpose the bias-free potential difference and gravity difference observations of the test area are used and the offset (bias) of the height datum, i.e., Finnish Height Datum 2000 (N2000) fixed to Normaal Amsterdams Peil (NAP) as origin point, with respect to the geoid is computed. The results of this computation show that potential of the origin point of N2000, i.e., NAP, is (62636857.68 ± 0.5) (m²/s²) and as such is (0.191 ± 0.003) (m) under the geoid defined by W ₀ = 62636855.8 (m²/s²). As the validity test of our methodology, the test area is divided into two parts and the corresponding potential difference and gravity difference observations are introduced into our GBVP separately and the bias of height datums of the two parts are computed with respect to the geoid. Obtaining approximately the same bias values for the height datums of the two parts being part of one height datum with one origin point proves the validity of our approach. Besides, the latter test shows the capability of our methodology for patch-wise application.     

Safety factor nomograms for homogeneous earth dams less than ten meters high

Homogeneous earth dams that are waterproofed with geomembranes are a suitable option for storing water and other sorts of liquids, like leachates from landfills. Such dams do not require complicated engineering technical calculations, their cost is usually low and they are not difficult to construct. To ensure the geotechnical safety of the dam, the slopes of the embankment must be correctly designed and constructed. This paper provides a set of nomograms which allow the user to get the safety factor of the slopes immediately. In some cases, it is only necessary to know previously the material classification according to the Unified Soil Classifications System. From this information it can be determined whether the material is appropriate or not. If the material classification is not available, geotechnical data of the material used in the construction of the embankment are needed. Examples of the application of nomograms are presented. Secondly, the paper includes a set of equations to calculate quickly the safety factor of a slope of earth upper than 7.5 m height.     

Despeckling of TerraSAR-X Data Using Second-Generation Wavelets

This letter presents the despeckling of synthetic aperture radar (SAR) images within the bandelet and contourlet domains. A model-based approach is presented for the despeckling of SAR images. The speckle-reduced estimate is found using the first-order Bayesian inference, and the best model's parameters are estimated using the second-order Bayesian inference. Synthetic and real images are used for evaluating the qualities of the despeckling methods. The experimental results showed that the combination of Bayesian inference and bandelet transform outperforms the contourlet-based despeckling algorithm using synthetic data and objective measurements.      

Assessment of the LandStar Real-Time DGPS Service under Several Operational Conditions

LandStar is a differential global positioning service (DGPS) that provides 24-h real-time positioning for various applications on land, water, and air in North America, Australia, New Zealand, Europe, and Africa. Its focus is on real-time applications requiring a submeter positioning capability such as agriculture, forestry, Geospatial Information Systems (GIS), survey/mapping, and land/vehicular navigation. LandStar uses a Wide Area Network of reference stations to derive DGPS corrections to model the variation of GPS error sources over a large area. These model parameters are used by the Virtual Reference Station processors to calculate standard corrections that are available for all predefined locations in the network. The corrections are transmitted to the user by L-band satellite communication in the standard RTCM SC104 DGPS correction format. This article investigates the performance of the LandStar Mk III system under various operational conditions and assesses its performance in both static and kinematic modes. Four field tests were conducted during 12 months that tested the sysem in clear static and kinematic conditions as well as suboptimal environments associated with low and heavy foliage conditions. Both the accuracy and availability of the system under these conditions is investigated, with an emphasis on whether the above variables are caused by the LandStar system differential corrections, the GPS measurements, or a combination of both. ? 1999 John Wiley & Sons, Inc.     

Differentiation for High-Precision GPS Velocity and Acceleration Determination

Accurate estimates of the velocity and acceleration of a platform are often needed in high dynamic positioning, airborne gravimetry, and geophysics. In turn, differentiation of GPS signals is a crucial process for obtaining these estimates. It is important in the measurement domain where, for example, the phase measurements are used along with their instantaneous derivative (Doppler) to estimate position and velocity. It is also important in postprocessing, where acceleration is usually estimated by differentiating estimates of position and velocity. Various methods of differentiating a signal can have very different effects on the resulting derivative, and their suitability varies from situation to situation. These comments set the stage for the investigations in this article. The objective is twofold: (1) to carry out a comprehensive study of possible differentiation methods, characterizing each in the frequency domain; and (2) to use real data to demonstrate each of these methods in both of the measurement and position domains, in conditions of variable, high, or unknown dynamics. Examples are given using real GPS data in both the measurement domain and in the position and velocity domain. The appropriate differentiator is used in several cases of varying dynamics to derive a Doppler signal from carrier phase measurements (rather than using the raw Doppler generated by the receiver). In the statistic case, it is seen that the accuracy of velocity estimates can be improved from 4.0 mm/s to 0.7 mm/s by using the correct filter. In conditions of medium dynamics experienced in an airborne gravity survey, it is demonstrated that accelerations as the 2–4 mGal level (1 mGal = 0.00001 m/s²) can be obtained at the required filtering periods. Finally, a precision motion table is used to show that when using the correct filter, velocity estimates under high dynamics can be improved by an order of magnitude to 27.0 mm/s. ? 1999 John Wiley & Sons, Inc.     

External atmospheric corrections in geodetic very-long-baseline interferometry

Three methods to correct for the atmospheric propagation delay in very-long-baseline interferometry (VLBI) measurements were investigated. In the analysis, the NASA R&D experiments from January 1993 to June 1995 were used. The methods were compared in correcting for the excess propagation delay due to water vapour, the “wet” delay, at one of the sites, the Onsala Space Observatory on the west coast of Sweden. The three methods were: (1) estimating the wet delay using the VLBI data themselves; (2) inferring the wet delay from water vapour radiometer (WVR) data, and (3) using independent estimates based on data from the global positioning system (GPS). Optimum elevation cutoff angles were 22^∘ and 26^∘ when using WVR and GPS data, respectively. The results were found to be similar in terms of reproducibility of the estimated baseline lengths. The shortest baselines tend to benefit from external measurements, whereas the lack of improvement in the longer baselines may be partly due to the large amount of data thrown away when removing observations at low elevation angles. Over a 2 week period of intensive measurements, the two methods using external data showed an overall improvement, for all baseline lengths, compared to the first method. This indicates that there are long-term systematic errors in the wet delay data estimated using WVR and GPS data. Received: 27 October 1998 / Accepted: 20 May 1999     

Preparation of volume table of SAL (Shorea robusta) - an approach using satellite data

Sal (Shorea robusta) is an important forest tree species in north and north-eastern India. Large-scale plantations of this species have been raised there under taungya and coppice system of management. The conventional volume table prepared for high sal forest is referred to infer the volume of production of this species. Earlier workers have used aerial remote sensing data to develop volume tables of this species. In the present study a volume table for sal is developed based on remotely sensed satellite data using a regression technique. A two-step method was developed to estimate mean tree volume from satellite data. In step 1, mean crown diameter — an intermediate variable - was estimated from satellite data. In step 2, the estimated mean crown diameter was used to estimate the mean tree volume. Addition of age of the crop as an independent variable improved the predictive ability of the regression equation.     

Cotton yield prediction through spectral parameters

To predict the crop yield from spectral parameters, a field experiment was conducted on cotton crop during 1997-98 Kharif season on a sandy loam soil at the Punjab Agricultural Unjversity, Ludhiana. India. Spectral reflectance and agronomic measurements were made for cotton species (American and Desi cotton), sown on two dates (May 1 and May 29) under five nitrogen levels (0, 40, 80, 120 and 160 kg/ha). Regression analysis showed that growth variables had poor correlation with seed cotton yield for all three models, however, yield attributes were significantly and highly correlated for second degree model with seed cotton yield. The integrated Radiance Ratio (RR) and Normalized Difference Vegetation Index (NDVI) measured over time were significantly correlated quadratically with seed cotton yield on three time segment periods viz., 81–110, 111–140 and 141–200 DAS, but highest correlation values were obtained during 81–110 DAS, In American cotton, the highest correlation coefficient for RR and NDVI were 0.91 and 0.81, respectively; whereas for Desi cotton these values were 0.88 and 0.84, respectively.