An internal variable model for the creep of rocksalt

Summary The creep strain rate of rocksalt, like that of other ductile crystalline materials, can be described by a power law equation of the type ( ) ⁿ , where the active stress is the difference between the total deviatoric applied stress and an internal stress _i . In this paper, the origin and the nature of this internal stress, which develops during inelastic deformation of the material, are discussed. It is shown that this internal stress can serve as an internal (or state) variable in the constitutive model of rocksalt, which reflects the microstructure evolution of the material under the competitive action of hardening and recovery mechanisms.An analysis of experimental data, both our own and those taken from the literature, demonstrates that such a law is able to correctly reproduce rocksalt creep test results in the steady-state domain. The proposed model is in accordance with the macroscopic and microscopic behavior of salt, and with direct measurements of the internal stresses made by others on this material.     

Evolution of nappes in the eastern margin of the Bohemian Massif: a kinematic interpretation

The entire pile of nappes in the eastern margin of the Bohemian massif is characterized by two stages of Variscan nappe emplacement each exhibiting a different kinematic and metamorphic evolution.The older emplacement (D1) probably occurred around 350-340 Ma ago and was synmetamorphic. The nappes show a typical systematic superposition of higher grade metamorphic units over lower grade ones. Thus, the crystalline complexes showing a HT-MP Barrovian imprint (Svratka allochthonous unit and Moldanubicum) were thrust over an intermediate unit affected by MTMP recrystallization (Bíte orthogneiss and its country rock), and at the base of the D1 nappe pile the Inner Phyllite Nappe (Biý Potok Unit) is characterized by LT/LP metamorphism.The second stage of tectonic evolution (D2) is characterized by a thin-skinned northward-oriented nappe emplacement that occurred under LT-LP conditions dated at 320-310 Ma. The whole nappe sequence formed during the first tectonometamorphic period (D1) was transported northward over the autochthonous »Deblín polymetamorphic and granitic complex« of Upper Proterozoic age and its Devonian sedimentary cover with very low metamorphism. During this second tectonic event the Brno granite massif (580 Ma) was only marginally incorporated in the Variscan nappe tectonics which resulted in kilometer-scale cover and basement duplexes. The tectonic evolution of the nappe pile ended with stage D3, represented by large- to medium-scale east-vergent folds with limited displacement.

---

Zusammenfassung Der Deckenbau am Ostrand der Böhmischen Masse erfolgte in zwei aufeinanderfolgenden Stadien, die sich sowohl in ihrer Kinematik als auch in ihrer Metamorphoseentwicklung deutlich voneinander unterschieden.Die ältere Phase (D1 ca. 350-340 Ma) ist durch synmetamorphe Überschiebungen charakterisiert. Sie führt zu einer metamorphen Inversion der überschobenen Deckeneinheiten, so daß generell hohe metamorphe Einheiten schwach metamorphe tektonisch überlagern. Der Svratka Komplex und das Moldanubikum als hangendste Decken sind durch MP/HT Paragenesen vom Barrow-Typ gekennzeichnet. Beide Einheiten sind auf den MP/MT-metamorphen Bite-Gneis und seine Rahmengesteine überschoben. Die Bílý potok Einheit als liegende Decke zeigt nur noch eine LP/ LT Regionalmetamorphose.Das jüngere Stadium (D2 ca. 320-310 Ma) ist durch eine Thin-skinned Tektonik mit nordvergentem Deckentransport unter LP/LT Bedingungen charakterisiert. Der gesamte, invers metamorphe D1-Deckenstapel wird dabei nach N über den autochtonen Deblín Komplex bzw. seine devonische Sedimenthülle überschoben.Das Brno Granit Massiv (580 Ma) wird nur randlich in diesen variszischen Deckenbau einbezogen. Die tektonische Entwicklung endet mit einem mittel bis großräumigen E-vergenten Faltenbau (D3 phase).

---

Résumé L'empilement des nappes a la bordure orientale du Massif de Bohème est caractérisé par deux stades de mise en place présentant différentes évolutions cinématiques et métamorphiques.La tectonique majeure de mise en place des nappes crustales intervient lors d'un métamorphisme de type barrowien, calé autour de 350-340 Ma. L'empilement qui en résulte montre une superposition systématique d'unités à fort degré de métamorphisme sur des unités moins métamorphiques. Ainsi les complexes cristallins, montrant des reliques de métamorphisme de haute à moyenne pression-haute température (unités cristallines de Svratka et du Moldanubien), chevauchent une unité intermédiaire affectée par un métamorphisme de moyenne à basse pression-moyenne température (l'orthogneiss de Bíte et son encaissant). A la base de cette pile édifiée durant la tectonique D1, l'unité des phyllites internes (unité de Bílý potok) est caractérisée par un métamorphisme de basse témperature-basse pression.Le second stade D2 de l'évolution tectonique est caractérisé par une tectonique pelliculaire à vergence nord datée à 320-310 Ma. L'empilement résultant de D1 est ainsi transporté vers le nord, au dessus du complexe autochtone d'âge protérozoïque supérieur (groupe de Deblín) et sa couverture sédimentaire dévonienne très faiblement métamorphisée.Le massif granitique de Brno (580 Ma) n'est que marginalement incorporé à cette tectonique de nappe varisque. Ceci se traduit par des duplex socle-couverture d'échelle plurikilométrique. L'évolution tectonique s'achève lors d'une troisième phase, marquée par de grands plis à vergence est. Le déplacement associé est alors d'amplitude limitée.

---

, . , 350-340 . . , , - ( ), , - ( ). , D 1, (- ) - . D 2 , 320-310 ., D 1, , , ( ) . (580 . ) , »« -, . , .

     

Ongonite from Ongon Khairkhan,Mongolia

Summary Albite-topaz kerotophyres, termed ongonites, were discovered byV. I. Kovalenko and coworkers at Ongon Khairkhan in Mongolia in 1970. The type area was revisited, described, resampled, the new data is compared with the earlier data and that from similar rocks elsewhere (Beauvoir and Cinovec granites; Macusani glass).Ongonites are fluorine-rich peraluminous sodic two feldspar granitoids with orthoclase and albite phenocrysts, high modal and normative albite content and the presence of topaz as common accessory mineral. They contain variable amounts of lithium micas or muscovite. Chemically, ongonite is similar to highly fractionated S-type or ilmenite series granitoids. In the type area, F-rich water-poor ongonite melts have intruded to a high crustal level.Ongonite displays a long history of subsolidus reactions and hydrothermal alteration. The hydrothermal alteration may be linked to a spatially associated quartz-wolframite stockwork not genetically related to ongonite. Ongonite has a low W content and an elevated Sn content despite a lack of association with Sn deposits.

---

Ongonite von Ongon Khairkhan, Mongolei

Zusammenfassung Albit-Topas-Keratophyre, auch als Ongonite bezeichnet, wurden 1970 von V. E. Kowalenko und Mitarbeitern bei Ongon Khairkhan in der Mongolei entdeckt. Die TypLokalität wurde beschrieben und beprobt und die neuen Daten werden mit den früher erhaltenen, und denen von ähnlichen Gesteinen in anderen Bereichen (die Granite von Beauvoir und Cinovec, das Glas von Macusani) verglichen.Ongonite sind Fluor- und Aluminiumreiche (Peraluminous), zwei-Feldspat-Natriumgranitoide mit idiomorphen Orthoklasen und Albit, hohem modalem und normativem Albitgehalt, und Topas als verbreitetem Nebenmineral. Sie führen wechselnde Gehalte von Lithiumglimmern oder Muskovit. Chemisch sind Ongonite stark fraktionierten S-Typ Granitoiden vergleichbar oder auch Granitoiden der Ilmenit-Serie. Im Gebiet der Typlokalität sind fluorreiche wasserarme Ongonit-Schmelzen in ein hohes Krustenniveau intrudiert worden.Ongonite zeigen eine lange Geschichte von Subsolidusreaktionen und hydrothermaler Umwandlung. Die hydrothermale Umwandlung kann mit einem räumlich assoziiertem Quarz-Wolframit Stockwerk in Beziehung gesetzt werden, das genetisch nicht mit den Ongoniten zusammenhängt. Ongonit hat einen niedrigen Wolframgehalt und einen erhöhten Zinngehalt, obwohl keine Assoziation mit Zinnlagerstätten zu beobachten ist.

     

On the systematic errors of the determinations of the absolute orientation of the meridian marks

The classical method of determination of the absolute azimuth (or Bessel's parameter n) can secure sufficiently precision for RA from observations of stars at high geographical latitudes during polar night only.     

Laser radiation in active amplifying media treated as a transport problem: Transfer equation derived and exactly solved

The flow of laser radiation in a plane-parallel cylindrical slab of active amplifying medium with axial symmetry is treated as a problem in radiative transfer. The appropriate one-dimensional transfer equation describing the transfer of laser radiation has been derived by an appeal to Einstein'sA, B coefficients (describing the processes of stimulated line absorption, spontaneous line emission, and stimulated line emission sustained by population inversion in the medium) and considering the rate equations to completely establish the rational of the transfer equation obtained. The equation is then exactly solved and the angular distribution of the emergent laser beam intensity is obtained; its numerically computed values are given in tables and plotted in graphs showing the nature of peaks of the emerging laser beam intensity about the axis of the laser cylinder.     

Astrometric investigation with the Tautenburg Schmidt telescope

The observations and the plate reduction technique for the determination of positions and absolute proper motions which is used in Potsdam are described. Recent results have shown that an accuracy of about 0 _. 1 for positions and 0 _. ⁷ cent _. ^–1 for proper motions can be achieved both for bright (8^m–12^m) and faint (16^m–18^m) stars. Three astrometric programmes using the Tautenburg plates are presented.     

V792 Her=HD 155638: A totally eclipsing RS CVn binary

Photometry of HD 155638=V792 Her has been analyzed to determine the elements of this totally eclipsing RS CVn binary. The light variation outside eclipse was found to have a period of 27^d.07±0^d.07, which is slightly different from the 27^d.5384±0^d.0045 orbital period. Analysis of the eclipses was achieved by a modification of the Russell-Merrill technique. With the aid of radial velocity measures, absolute elements were obtained for the hot and cool stars, respectively;R _h=2.58R ,R _c=12.28R ,M _h=1.40M ,M _c=1.46M ,i=80^o.61 and velocity semi-amplitudesK _c=48.36 km s^–1±0.79 km s^–1, andK _h=50.50 km s^–1±0.33 km s^–1. The apparent magnitudes areV _h=9 ^m .73 andV _c=8 ^m .48. The distance to HD 155638 was estimated to be 310 parsecs.     

Realisation of a celestial system based on VLBI geodynamics programs

The relative orientations of various VLBI celestial reference frames are evaluated on the basis of coordinate differences of common sources. It is shown that an accuracy better than 0.001 can be achieved. Possible regional deformations in the different catalogues are investigated; they are found to reach a few 0.001 in some restricted zones. The application of these studies to the realisation of a combined celestial reference frame consistent with the BIH Terrestrial System is outlined.     

Surface distribution of M stars with different IRAS colour

The surface distribution of M stars is studied by differentiating them according to whether they show a circumstellar dust shell (CS) or not. Analysis shows that galactic latitudinal and longitudinal distributions are not determined by spectral subclasses alone. The study also indicates that M-type stars with CS have higher luminosities in the K band than those without CS. The M stars used in the study are obtained from theTwo-Micron Sky-Survey Catalogue (IRC) which is a most unbiased sample with respect to the interstellar extinction. The CS feature is identified by the ratio of flux densities at 12 and 25 m in the IRAS point source catalog.