A comparative study of some directional sea models

Current specification of the ocean wave environment for the design of offshore platforms does not adequately describe the directional nature of a real seaway. The strong wave frequency dependent nature of the directional behavior of observed seas is often over-simplified for design. A general formulation encompassing a wide range of directional sea models is presented. Parameter values used in some of the more popular directional sea models are examined. Approximate expressions for the two frequency dependent parameters in a modified Longuet-Higgins cosine wave spreading model are presented. A general procedure which allows an engineer to estimate parameters for alternate wave spreading models is discussed. To illustrate this procedure an empirically based modified cosine spreading model is used as the basis to estimate frequency dependent parameters for circular normal and wrapped Gaussian wave spreading models. A comparison of the contours of the various directional sea models and the prediction of the root-mean-square velocity distribution is presented.     

Morphodynamics of a bar-trough surf zone

A field study was made of the distinguishing morphodynamic processes operating in a surf zone which perennially exhibits accentuated bar-trough topography (the “longshore-bar-trough” and “rhytmic-bar-and-beach” states as described by Wright and Short, 1984). Characteristic features of the morphology include a shallow bar with a steep shoreward face, a deep trough, and a steep beach face. This morphology, which is favored by moderate breaker heights and small tidal ranges, strongly controls the coupled suite of hydrodynamic processes. In contrast to fully dissipative surf zones, the bar-trough surf zone is not at all saturated and oscillations at incident wave frequency remain dominant from the break point to the subaerial beach. The degree of incident wave groupiness does not change appreciably across the surf zone. Infragravity standing waves which, in dissipative surf zones, dominate the inshore energy, remain energetically secondary and occur at higher frequencies in the bar trough surf zone. Analyses of the field data combined with numerical simulations of leaky mode and edge wave nodal—antinodal positions over observed surf-zone profiles, indicate that the frequencies which prevail are favored by the resonant condition of antinodes over the bar and nodes in the trough. Standing waves which would have nodes over the bar are suppressed. Sediment resuspension in the surf zone appears to be largely attributable to the incident waves which are the main source of bed shear stress. In addition, the extra near-bottom eddy viscosity provided by the reformed, non-breaking waves traversing the trough significantly affects the vertical velocity profile of the longshore current. Whereas the bar is highly mobile in terms of onshore—offshore migration rates, the beach face and inner regions of the trough are remarkably stable over time.     

Cd, Pb, Cu, Ni and Co distribution in the German Bight

Cd, Pb and Cu concentrations, dissolved and total, have been determined in the German Bight. In 1975, 1977, 1978, 1980 and 1983 water samples were collected at 215 sampling stations. In the 1983 mission samples were also analysed for Ni and Co. The samples were filtered and acidified immediately after collection. Analysis was performed by voltammetry.The analytical data indicate that a net portion of the Cd, the Weser being a distinct source for it, will cross the estuarine zone. Open sea Cd levels in the German Bight are about a factor 10 higher than North Atlantic values. Pb, being transported mainly with the suspended particulate phase (up to 99.5%), is better eliminated by sedimentation in the estuaries. Ni and Cu occur mainly in the dissolved phase. Pollution by Co is distinct in the Elbe, but the output is rapidly diluted to background contents below 10 ng kg⁻¹. An interpretation of the results from the different years yields a rather steady state situation in the German Bight.     

Wave drift enhancement effects in multi column structures

A theoretical assessment is made of mean wave drift forces on groups of vertical circular cylinders, such as the columns of a floating offshore platform. A complete analytical solution is obtained for two cylinders extending from seabed to free surface, and a long wave approximation is found to provide reliable predictions of the drift force in line with the waves at low frequencies. For moderate separation between the two cylinders, this force is found to tend at low frequencies to a value four times the force on an isolated cylinder.A numerical method is employed to study two surface piercing cylinders truncated below the free surface, and an arrangement of four vertical cylinders characteristic of a floating offshore platform. The mean vertical drift force is found to be reasonably well approximated, over the frequency range of practical interest, by the force on an individual cylinder considered in isolation multiplied by the number of cylinders in the group. Interaction effects, however, have a profound influence on the total horizontal drift force. At low frequencies this force is found to tend to the force on an isolated cylinder multiplied by the squate of the number of cylinders in the group.     

An experimental investigation of plunging breaker boundary layers in the transformation zone

Experimental investigation is made on the boundary layers of the transformation zone (i.e. the region between the last symmetrical wave profile depth and the breaking point) of plunging breakers propagating on a smooth beach with 1/12 uniform slope. Using a laser anemometer, the particle velocities are measured at four verticals along the transformation zone for three different steepnesses of waves within the plunging breaker range. The boundary layer flow in the transformation zone is found mostly of turbulent character and vertical distribution of particle velocities does not seem to conform to the classical law of the wall distribution given for steady-flow boundary layers. The results show that free-stream particle velocities, in the boundary layer of the breaker under the crest phase, increase considerably as the wave progresses towards the breaking point. The boundary layer thickness, defined as the velocity-affected region, remains constant throughout the transformation zone but it decreases with increasing deep-water wave steepness for the particular beach slope tested.     

Design of a caisson plate under wave impact

From the laboratory experiments and field studies it has been shown that when a wave breaks directly on a vertical wall, impact pressures of high magnitude and short duration, are produced. Despite the recent advances made in collecting data on impact pressure histories and their spatial distributions, analyses on the structural behaviour of the walls loaded by the impact forces do not seem adequate. In the present study the theoretical analysis of the response characteristics of a caisson plate, having different aspect ratios, under the wave impact loading is investigated. Numerical results for the dynamic values of moments and transverse displacements are obtained by the method of finite elements. Some prerequisite experimental data for wave breaking and resulting impact pressures are provided. The static results for moments and deflections are also computed for comparing them with the dynamic values. The dynamic results are found significantly greater than the static values. The ratio between the dynamic and static values is called “Dynamic magnification factor” that varies with plate aspect ratio. Based on this factor a procedure is proposed which may have practical consequences in the design of caisson plates.     

The effect of currents on the generation of internal waves by a barotropic tide near an underwater ridge

In the frame of the linear theory for long waves, the paper studies long waves generated by a barotropic tide running at an arbitrary angle over a bottom ridge. The ocean is assumed to be two-layered. In the area of a ridge with a rectangular cross section, geostrophic flows are considered, coupled with the inclinations of the free surface and interface. Wave amplitudes are shown to depend on the angle of an onrunning tide and this allows us to reach a conclusion about the influence of a geostrophic current on the generation of internal waves. Translated by Vladimir A. Puchkin.     

The Amphipod Community as a Bioindicator in Algeciras Bay (Southern Iberian Peninsula) Based on a Spatio-Temporal Distribution

Abstract. The amphipod population associated with Bugula neritina (L.), a verycommon bryozoan species in Algeciras Bay (Strait of Gibraltar), was studied on a spatio-temporal scale, in order to define its role as a bioindicator. Samples were collected in December, March, June and September along a transect running from the external to the internal sampling stations.
Fifty-three species belonging to 22 families were identified; the most abundant species were Jassa marmorata H olmes , Ischyrocerus inexpectatus (R uffo ) and Phtisica marina S labber .
The spatial evolution of the amphipod community reflected the physico-chemical conditions of Algeciras Bay, yielding a clear gradient from the outer to the inner stations. The stations located at the mouth of the bay, characterised by high hydrodynamism and low sedimentation, had a higher diversity and species richness than the inner stations with low water movement and higher sedimentation. Eight species preferred for the outer stations, while another nine species were typical of the inner harbours.
The most notable aspect of the seasonal evolution was the increased dominance of the tube-builder and deposit-suspension feeder Jassa marmorota .
Structural and ordination analyses corroborate the outer-inner gradient in the bay and illustrate the importance of hydrodynamic forces and sedimentation in the amphipod community.     

Effects of spectrum band width on the distribution of wave heights and periods

The statistical distribution of the crest-to-trough heights of narrowband nonlinear sea waves is derived in a semi-closed form. A quantitative comparison of the resulting density and exceedance probability distributions with those of the linear theory is given. It is shown that the nonlinearity of waves, even with steepnesses typical of extreme sea states, has an insignificant influence on the distribution of crest-to-trough heights.     

Variation of roughness length of a mobile sand bed in a tidal flow

Velocity profiles, suspended sand concentration, and ripple shapes were measured over the tidal cycle on a mobile bed. Variations in ripple shape or dimensions, and the effects of mobile sediment could not account for the variations in bed roughness length, which increased systematically during the tide from 0.5 to 1.3 cm. The effects of acceleration could be the cause as they would lead to the same pattern of variation, but existing theory does not give the correct magnitude.