Arctic freshwater ostracods from modern periglacial environments in the Lena River Delta (Siberian Arctic,Russia): geochemical applications for palaeoenvironmental reconstructions

The aim of this study is to describe ostracods from freshwater habitats in the Siberian Arctic in order to estimate the present-day relationships between the environmental setting and the geochemical properties of ostracod calcite. A special focus is on the element ratios (Mg/Ca, Sr/Ca), and the stable isotope composition (δ¹⁸O, δ¹³C), in both ambient waters and ostracod calcite. The most common species are Fabaeformiscandona pedata and F. harmsworthi with the highest frequency in all studied waters. Average partition coefficients D(Sr) of F. pedata are 0.33 ± 0.06 (1σ) in females, and 0.32 ± 0.06 (1σ) in males. A near 1:1 relationship of δ¹⁸O was found, with a mean shift of Δ_mean = 2.2‰ ± 0.5 (1σ) to heavier values in ostracod calcite of F. pedata as compared to ambient waters. The shift is not dependent on δ¹⁸O_water, and is caused by metabolic (vital) and temperature effects. Temperature-dependence is reflected in the variations of this shift. For ostracod calcite of F. pedata a vital effect as compared to inorganic calcite in equilibrium was quantified with 1.4‰. Results of this study are valuable for the palaeoenvironmental interpretation of geochemical data of fossil ostracods from permafrost deposits.     

A Raman spectroscopic study on the structural disorder of monazite–(Ce)

This study addresses whether Raman spectra can be used to estimate the degree of accumulated radiation damage in monazite-(Ce) samples whose chemical composition was previously determined. Our results indicate that the degree of disorder in monazite–(Ce), as observed from increasing Raman band broadening, generally depends on both the structural state (i.e., radiation damage) and the chemical composition (i.e., incorporation of non-formula elements). The chemical effects were studied on synthetic orthophosphates grown using the Li-Mo flux method, and non radiation-damaged analogues of the naturally radiation-damaged monazite–(Ce) samples, produced by dry annealing. We found that the “chemical” Raman-band broadening of natural monazite–(Ce) can be predicted by the empirical formula, $$ {\hbox{FWHM}} {\hbox{[c}}{{\hbox{m}}^{ - {1}}}{]} = {3}{.95} + {26}{.66} \times {\hbox{(Th}} + {\hbox{U}} + {\hbox{Ca}} + {\hbox{Pb)}} {\hbox{[apfu]}} $$ where, FWHM = full width at half maximum of the main Raman band of monazite–(Ce) (i.e., the symmetric PO₄ stretching near 970?cm^?1), and (Th+U+Ca+Pb) = sum of the four elements in apfu (atoms per formula unit). Provided the chemical composition of a natural monazite–(Ce) is known, this “chemical band broadening” can be used to estimate the degree of structural radiation damage from the observed FWHM of the ν₁(PO₄) band of that particular sample using Raman spectroscopy. Our annealing studies on a wide range of monazite–(Ce) reference materials and other monazite–(Ce) samples confirmed that this mineral virtually never becomes highly radiation damaged. Potential advantages and the practical use of the proposed method in the Earth sciences are discussed.     

Direct terrestrial-marine correlation demonstrates surprisingly late onset of the last interglacial in central Europe

An interdisciplinary study of a small sedimentary basin at Neumark Nord 2 (NN2), Germany, has yielded a high-resolution record of the palaeomagnetic Blake Event, which we are able to place at the early part of the last interglacial pollen sequence documented from the same section. We use this data to calculate the duration of this stratigraphically important event at 3400 ± 350 yr. More importantly, the Neumark Nord 2 data enables precise terrestrial-marine correlation for the Eemian stage in central Europe. This shows a remarkably large time lag of ca. 5000 yr between the MIS 5e ‘peak’ in the marine record and the start of the last interglacial in this region.     

Geological evolution of the West Luzon Basin (South China Sea,Philippines)

Interpretation of deep 2-D multi-channel seismic data sheds insights into the geological evolution of the West Luzon Basin, Philippines. This basin is a sediment-filled trough that is located between the island of Luzon and the outer arc high of the west Luzon subduction zone. High-amplitude, low-frequency reflection bands mark the acoustic basement. The basement, at about 6 s (TWT), is dissected by normal faults with some of them being inverted in a later phase of deformation. The sedimentary successions, overlying the basement are stratified with partly chaotic structures and discontinuous reflectors. Five regional unconformities separate major stratigraphic units. Grid calculations of our seismic data reveal variations in the sedimentation pattern of the basin with a shift of the deposition centre from east to west and backwards during formation. A distinct bottom-simulating reflector is commonly observed. Because the northern boundary of the continental fragments to the South of the West Luzon Basin is unclear we speculate that the basin may be (partly) underlain by continental crust. The continental crust was affected by rifting prior to and during the opening of the South China Sea and the basin was overprinted at a later stage by a forearc structural setting when subduction was initiated.     

Factors affecting the Nd3+ (REE3+) luminescence of minerals

In this paper, possibilities and limits of the application of REE³⁺ luminescence (especially the Nd^{3+ 4}F_3/2 → ⁴I_9/2 emission) as structural probe are evaluated. Important factors controlling the Nd³⁺ luminescence signal are discussed, including effects of the crystal-field, crystal orientation, structural state, and temperature. Particular attention was paid to the study of the accessory minerals zircon (ZrSiO₄), xenotime–(Y) (YPO₄), monazite–(Ce) (CePO₄) and their synthetic analogues. Based on these examples we review in short that (1) REE³⁺ luminescence can be used as non-destructive phase identification method, (2) the intensities of certain luminescence bands are strongly influenced by crystal orientation effects, and (3) increased widths of REE³⁺-related emission bands are a strong indicator for structural disorder. We discuss the potential of luminescence spectroscopy, complementary to Raman spectroscopy, for the quantitative estimation of chemical (and potentially also radiation-induced) disorder. For the latter, emissions of Nd³⁺-related centres are found to be promising candidates.     

Drill cutting accumulations in the Northern and Central North Sea: a review of environmental interactions and chemical fate

The exploration and production of North Sea oil and gas reserves has resulted in the accumulation of large quantities of drill cuttings on the seabed surrounding drill sites. This complex mixture of man-made and natural substances contains higher concentrations of certain metals (Ba, Cr, Cu, Ni, Pb, and Zn) and hydrocarbons than are observed in background sediments. With decommissioning of older platforms underway, an evaluation of the environmental interactions and chemical fate of the drill cuttings accumulations is required.This review concentrates on contaminants within drill cutting accumulations in the Northern and Central North Sea (56 degrees N-62 degrees N). Present literature reviewed reveals that hydrocarbons within the cuttings piles remain relatively unchanged with time. A considerable proportion of the associated contaminants are likely to remain within the cuttings pile unless they are disturbed which will then increase exchanges of porewater and solids back to the seabed surface resulting in pathways of exposure for organisms.     

Polyfluorinated compounds in waste water treatment plant effluents and surface waters along the River Elbe, Germany

Polyfluorinated compounds (PFCs) were investigated in waste water treatment plant (WWTP) effluents and surface waters of the River Elbe from samples collected in 2007. Concentrations of various PFCs, including C₄–C₈ perfluorinated sulfonates (PFSAs), C₆ and C₈ perfluorinated sulfinates, 6:2 fluorotelomer sulfonate, C₅–C₁₃ perfluorinated carboxylic acids (PFCAs), C₄ and C₈ perfluoroalkyl sulfonamides and 6:2, 8:2 and 10:2 unsaturated fluorotelomercarboxylic acids were quantified. ∑PFC concentrations of the river water ranged from 7.6 to 26.4 ng L⁻¹, whereas ∑PFC concentrations of WWTP effluents were approximately 5–10 times higher (30.5–266.3 ng L⁻¹), indicating that WWTPs are potential sources of PFCs in the marine environment. PFC patterns of different WWTP effluents varied depending on the origin of the waste water, whereas the profile of PFC composition in the river water was relatively constant. In both kinds of water samples, perfluorooctanoic acid (PFOA) was the major PFC, whereas perfluorobutane sulfonate (PFBS) was the predominant PFSA.     

Heterogeneity of melts in impact deposits and implications for their origin (Ries suevite,Germany)

Impact melt‐bearing clastic deposits (suevites) are one of the most important records of the impact cratering process. A deeper understanding of their composition and formation is therefore essential. This study focuses on impact melt particles in suevite at Ries, Germany. Textures and chemical evidence indicate that the suevite contains three melt types that originate from different shock levels in the target. The most abundant melt type (“melt type 1”) represents well‐mixed whole‐rock melting of crystalline basement and includes incompletely mixed mafic melt schlieren (“melt type 1 mafic”). Polymineralic melt type 2 comprises mixes between monomineralic melt types 3 and melt type 1. Melt types 2 and 3 are located within melt type 1 as small patches or schlieren but also isolated within the suevite matrix. The main melt type 1 is heterogeneous with respect to trace elements, varying geographically around the crater: in the western sector, it has lower values in trace elements, e.g., Ba, Zr, Th, and Ce, than in the eastern sector. The west–east zoning likely reflects the heterogeneous nature of crystalline basement target rocks with lower trace element contents, e.g., Ba, Zr, Th, and Ce, in the west compared to the east. The chemical zoning pattern of suevite melt type 1 indicates that mixing during ejection and emplacement occurred only on a local (hundreds of meters) scale. The incomplete larger scale mixing indicated by the preservation of these local chemical signatures, and schlieren corroborate the assumption that mixing, ejection, and quenching were very rapid, short‐lived processes.     

Experimental impact cratering: A summary of the major results of the MEMIN research unit

This paper reviews major findings of the Multidisciplinary Experimental and Modeling Impact Crater Research Network (MEMIN). MEMIN is a consortium, funded from 2009 till 2017 by the German Research Foundation, and is aimed at investigating impact cratering processes by experimental and modeling approaches. The vision of this network has been to comprehensively quantify impact processes by conducting a strictly controlled experimental campaign at the laboratory scale, together with a multidisciplinary analytical approach. Central to MEMIN has been the use of powerful two-stage light-gas accelerators capable of producing impact craters in the decimeter size range in solid rocks that allowed detailed spatial analyses of petrophysical, structural, and geochemical changes in target rocks and ejecta. In addition, explosive setups, membrane-driven diamond anvil cells, as well as laser irradiation and split Hopkinson pressure bar technologies have been used to study the response of minerals and rocks to shock and dynamic loading as well as high-temperature conditions. We used Seeberger sandstone, Taunus quartzite, Carrara marble, and Weibern tuff as major target rock types. In concert with the experiments we conducted mesoscale numerical simulations of shock wave propagation in heterogeneous rocks resolving the complex response of grains and pores to compressive, shear, and tensile loading and macroscale modeling of crater formation and fracturing. Major results comprise (1) projectile–target interaction, (2) various aspects of shock metamorphism with special focus on low shock pressures and effects of target porosity and water saturation, (3) crater morphologies and cratering efficiencies in various nonporous and porous lithologies, (4) in situ target damage, (5) ejecta dynamics, and (6) geophysical survey of experimental craters.     

Observed and projected climate change in the European region during the twentieth and twenty-first centuries according to Feddema

Climate change in the European region during the twentieth and twenty-first centuries is analyzed according to Feddema’s method. Precipitation and air temperature data from the twentieth century are taken from the Climatic Research Unit, while data for the twenty-first century are taken from the ENSEMBLES climate change project. The latter were bias-corrected to ensure homogeneity across the twentieth and twenty-first centuries. Climate classes based on monthly and annual values of potential evapotranspiration, precipitation and their ratio, are defined for 30-year averages, from which trend and spatial agreement analysis are calculated. There are separate classes for annual values and for intra-annual variation. The results indicate that the change of annual climate characteristics will be much more intense in the twenty-first than it was in the twentieth century. The dominant process in the projections is warming, mostly via cold to cool (about 45% of grid points) in north Europe and cool to warm (about 8% of grid points) transformations. The second most important process is the drying of moderately moist classes affecting about 10% of the grid points in south Europe. Changes in intra-annual variability classes are more common than changes in the annual ones during the twentieth century. The chance of increase in intra-annual temperature variation from high to extreme is about 5% during the course of the twentieth century, and about 10% in the following century.