Climate and climate change in the Austrian–Swiss region of the European Alps during the twentieth century according to Feddema

We present a 1-km² gridded German dataset of hourly surface climate variables covering the period 1995 to 2012. The dataset comprises 12 variables including temperature, dew point, cloud cover, wind speed and direction, global and direct shortwave radiation, down- and up-welling longwave radiation, sea level pressure, relative humidity and vapour pressure. This dataset was constructed statistically from station data, satellite observations and model data. It is outstanding in terms of spatial and temporal resolution and in the number of climate variables. For each variable, we employed the most suitable gridding method and combined the best of several information sources, including station records, satellite-derived data and data from a regional climate model. A module to estimate urban heat island intensity was integrated for air and dew point temperature. Owing to the low density of available synop stations, the gridded dataset does not capture all variations that may occur at a resolution of 1 km². This applies to areas of complex terrain (all the variables), and in particular to wind speed and the radiation parameters. To achieve maximum precision, we used all observational information when it was available. This, however, leads to inhomogeneities in station network density and affects the long-term consistency of the dataset. A first climate analysis for Germany was conducted. The Rhine River Valley, for example, exhibited more than 100 summer days in 2003, whereas in 1996, the number was low everywhere in Germany. The dataset is useful for applications in various climate-related studies, hazard management and for solar or wind energy applications and it is available via doi: 10.5676/DWD_CDC/TRY_Basis_v001.     

The use of proxy chemical records in Coral skeletons to ascertain past environmental conditions in Florida Bay

This paper will discuss the use of chemical proxies in coral skeletons to reconstruct the history of salinity (from the δ¹⁸O of the skeleton) and nutrients in the water (from the δ¹³C) in Florida Bay between 1824 and 1994. Monthly salinity and water temperature data collected since 1989 were used to establish a correlation between salinity, temperature, and the δ¹⁸O of the skeleton of the coralSolenastrea bournoni from Lignumvitae Basin in Florida Bay. This relationship explains over 50% of the variance in the δ¹⁸O of the skeleton. Assuming that interannual variations in the temperature of the water are small, we have applied this relationship to the δ¹⁸O measured in the coral skeleton collected from Lignumvitae Basin which has a record between 1824 and 1993. These data provide a revised estimate of salinity variation in Lignumvitae Basin for the period when historical records for salinity were not available, and show that the highest salinity events occurred in the past 30 yr. Using the relationships between the salinity in Lignumvitate Basin and other basins, obtained using a modern dataset, we are able to estimate ranges in salinity for other portions of Florida Bay. Skeletons of specimens of the coral speciesSiderastrea radians collected from other areas of Florida Bay show similar patterns in the δ¹⁸O over the past 10 yr, indicating that corals in most portions of Florida Bay are recording salinity variations in their skeletons and therefore support the idea that salinity variations in different portions of Florida Bay can be related. Fluorescence analysis of the coral from Lignumvitae Basin shows a large change in the magnitude of the 10-yr signal coincident with the construction of the railway, confirming that this event had a significant impact upon Florida Bay. The δ¹³C of the coral skeletons reveals a long-term history of the oxidation of organic material, fixation of carbon by photosynthesis (algal blooms), and the intrusion of marine water into the bay. Since the construction of the railway from Miami to Key West there has been a long-term decrease in the δ¹³C of the coral skeleton from Lignumvitae Basin, suggesting the increased oxidation of organic material in this area. This decrease in δ¹³C appears to have reached a minimum value around 1984 and has increased since this time in the western portions of Florida Bay. The increase may be related to the algal blooms prevalent in the area or alternatively could result from intrusion of more marine water. In the eastern areas, a small increase in the δ¹⁸C between 1984 and 1988 was followed by further decline suggesting more oxidation of organic material. We have also attempted to use the concentration of barium in the coral skeleton as a proxy indicator of the nutrient status in Florida Bay.     

Large-Scale and Mesoscale Distribution of Plankton Biomass and Metabolic Activity in the Northeastern Central Atlantic

Plankton biomass and indices of metabolism and growth [electron transport system (ETS), glutamate dehydrogenase (GDH) and aspartate transcarbamylase (ATC) activities] were studied over a 2,800 km east-west section of the tropical North Atlantic Ocean (21°N) in <200, 200–500 and >;500 µm size classes. On the large-scale, zooplankton (>;200 µm) enzymatic activities increased westward in the study section, where large cyanobacteria chains (Trichodesmium spp.) were observed. Parallel to it, an increase in medium calanoids (1–2 mm length) was observed towards the western part of the transect, whereas small calanoids (<1 mm) were dominant throughout the boundary area of the subtropical gyre. Microplankton ETS and mesoplankton ETS and ATC activities seemed to match the wave length of low frequency waves. Our results suggest that such waves are related to the observed enhancement of metabolic activity of micro- and mesoplankton. The large-scale and mesoscale variability observed give evidence of the inadequacy of assuming a steady-state picture of the euphotic zone of tropical and subtropical waters.     

Mega-monsoon variability during the late Triassic: Re-assessing the role of orbital forcing in the deposition of playa sediments in the Germanic Basin

The formation of the supercontinent Pangaea during the Permo–Triassic gave rise to an extreme monsoonal climate (often termed ‘mega-monsoon’) that has been documented by numerous palaeo-records. However, considerable debate exists about the role of orbital forcing in causing humid intervals in an otherwise arid climate. To shed new light on the forcing of monsoonal variability in subtropical Pangaea, this study focuses on sediment facies and colour variability of playa and alluvial fan deposits in an outcrop from the late Carnian (ca 225 Ma) in the southern Germanic Basin, south-western Germany. The sediments were deposited against a background of increasingly arid conditions following the humid Carnian Pluvial Event (ca 234 to 232 Ma). The ca 2·4 Myr long sedimentary succession studied shows a tripartite long-term evolution, starting with a distal mud-flat facies deposited under arid conditions. This phase was followed by a highly variable playa-lake environment that documents more humid conditions and finally a regression of the playa-lake due to a return of arid conditions. The red–green (a*) and lightness (L*) records show that this long-term variability was overprinted by alternating wet/dry cycles driven by orbital precession and ca 405 kyr eccentricity, without significant influence of obliquity. The absence of obliquity in this record indicates that high-latitude forcing played only a minor role in the southern Germanic Basin during the late Carnian. This is different from the subsequent Norian when high-latitude signals became more pronounced, potentially related to the northward drift of the Germanic Basin. The recurring pattern of pluvial events during the late Triassic demonstrates that orbital forcing, in particular eccentricity, stimulated the occurrence and intensity of wet phases. It also highlights the possibility that the Carnian Pluvial Event, although most likely triggered by enhanced volcanic activity, may also have been modified by an orbital stimulus.     

The fusion crust of the Winchcombe meteorite: A preserved record of atmospheric entry processes

Fusion crusts form during the atmospheric entry heating of meteorites and preserve a record of the conditions that occurred during deceleration in the atmosphere. The fusion crust of the Winchcombe meteorite closely resembles that of other stony meteorites, and in particular CM2 chondrites, since it is dominated by olivine phenocrysts set in a glassy mesostasis with magnetite, and is highly vesicular. Dehydration cracks are unusually abundant in Winchcombe. Failure of this weak layer is an additional ablation mechanism to produce large numbers of particles during deceleration, consistent with the observation of pulses of plasma in videos of the Winchcombe fireball. Calving events might provide an observable phenomenon related to meteorites that are particularly susceptible to dehydration. Oscillatory zoning is observed within olivine phenocrysts in the fusion crust, in contrast to other meteorites, perhaps owing to temperature fluctuations resulting from calving events. Magnetite monolayers are found in the crust, and have also not been previously reported, and form discontinuous strata. These features grade into magnetite rims formed on the external surface of the crust and suggest the trapping of surface magnetite by collapse of melt. Magnetite monolayers may be a feature of meteorites that undergo significant degassing. Silicate warts with dendritic textures were observed and are suggested to be droplets ablated from another stone in the shower. They, therefore, represent the first evidence for intershower transfer of ablation materials and are consistent with the other evidence in the Winchcombe meteorite for unusually intense gas loss and ablation, despite its low entry velocity.     

Water transport and tracer mixing in volcanic ash soils at a tropical hillslope: A wet layered sloping sponge

Andosol soils formed in volcanic ash provide key hydrological services in montane environments. To unravel the subsurface water transport and tracer mixing in these soils we conducted a detailed characterization of soil properties and analyzed a 3-year data set of sub-hourly hydrometric and weekly stable isotope data collected at three locations along a steep hillslope. A weakly developed (52–61 cm depth), highly organic andic (Ah) horizon overlaying a mineral (C) horizon was identified, both showing relatively similar properties and subsurface flow dynamics along the hillslope. Soil moisture observations in the Ah horizon showed a fast responding (few hours) “rooted” layer to a depth of 15 cm, overlying a “perched” layer that remained near saturated year-round. The formation of the latter results from the high organic matter (33–42%) and clay (29–31%) content of the Ah horizon and an abrupt hydraulic conductivity reduction in this layer with respect to the rooted layer above. Isotopic signatures revealed that water resides within this soil horizon for short periods, both at the rooted (2 weeks) and perched (4 weeks) layer. A fast soil moisture reaction during rainfall events was also observed in the C horizon, with response times similar to those in the rooted layer. These results indicate that despite the perched layer, which helps sustain the water storage of the soil, a fast vertical mobilization of water through the entire soil profile occurs during rainfall events. The latter being the result of the fast transmissivity of hydraulic potentials through the porous matrix of the Andosols, as evidenced by the exponential shape of the water retention curves of the subsequent horizons. These findings demonstrate that the hydrological behavior of volcanic ash soils resembles that of a “layered sponge,” in which vertical flow paths dominate.     

Performance of buildings with masonry infill walls during the 2011 Lorca earthquake

On Wednesday 11th May 2011 at 6:47 pm (local time) a magnitude 5.1 Mw earthquake occurred 6 km northeast of Lorca with a depth of around 5 km. As a consequence of the shallow depth and the small epicentral distance, important damage was produced in several masonry constructions and even led to the collapse of one of them. Pieces of the facades of several buildings fell down onto the sidewalk, being one of the reasons for the killing of a total of 9 people. The objective of this paper is to describe and analyze the failure patterns observed in reinforced concrete frame buildings with masonry infill walls ranging from 3 to 8 floors in height. Structural as well as non-structural masonry walls suffered important damage that led to redistributions of forces causing in some cases the failure of columns. The importance of the interaction between the structural frames and the infill panels is analyzed by means of non-linear Finite Element Models. The resulting load levels are compared with the member capacities and the changes of the mechanical properties during the seismic event are described and discussed. In the light of the results obtained the observed failure patterns are explained. Some comments are stated concerning the adequacy of the numerical models that are usually used during the design phase for the seismic analysis.     

On the breakdown of zircon upon “dry” thermal annealing

Zircon samples without and with secondary chemical alteration from diverse sources were subjected to heat treatment at 1400 °C for 96 h. Resulting new phases and textures suggest that decomposition of zircon into component oxides occurred in all experiments to various degrees. The crucible material was found to have a strong influence on the extent of breakdown, especially in the case of altered starting materials. In this study the progressive stages of the breakdown of zircon grains are described. The factors that may govern the decomposition are discussed, including radiation damage, secondary alteration and external reaction conditions (sample container, atmosphere). Alumina crucibles should generally be avoided in dry annealing of zircon, to minimise uncontrolled breakdown into oxides.     

Crustal recycling, mantle dehydration, and the thermal evolution of Mars

We have reinvestigated the coupled thermal and crustal evolution of Mars taking new laboratory data concerning the flow behavior of iron-rich olivine into account. The low mantle viscosities associated with the relatively higher iron content of the martian mantle as well as the observed high concentrations of heat producing elements in a crust with a reduced thermal conductivity were found to promote phases of crustal recycling in many models. As crustal recycling is incompatible with an early separation of geochemical reservoirs, models were required to show no episodes of crustal recycling. Furthermore, admissible models were required to reproduce the martian crust formation history, to allow for the formation of partial melt under present day mantle conditions and to reproduce the measured concentrations of potassium and thorium on the martian surface. Taking dehydration stiffening of the mantle viscosity by the extraction of water from the mantle into account, we found that admissible models have low initial upper mantle temperatures around 1650 K, preferably a primordial crustal thickness of 30 km, and an initially wet mantle rheology. The crust formation process on Mars would then be driven by the extraction of a primordial crust after core formation, cooling the mantle to temperatures close to the peridotite solidus. According to this scenario, the second stage of global crust formation took place over a more extended period of time, waning at around 3500 Myr b.p., and was driven by heat produced by the decay of radioactive elements. Present-day volcanism would then be driven by mantle plumes originating at the core-mantle boundary under regions of locally thickened, thermally insulating crust. Water extraction from the mantle was found to be relatively efficient and close to 40% of the total inventory was lost from the mantle in most models. Assuming an initial mantle water content of 100 ppm and that 10% of the extracted water is supplied to the surface, this amount is equivalent to a 14 m thick global surface layer, suggesting that volcanic outgassing of H₂O could have significantly influenced the early martian climate and increased the planet’s habitability.