Clast abrasion of a rock shore platform on the Atlantic coast of Ireland

The abrasion of coastal rock platforms by individual or clusters of clasts during transport has not been quantitatively assessed. We present a study which identifies the types of abrasion and quantifies erosion due to the transport of clasts during three storms in February and March 2016. We explore relationships between platform roughness, determined by the fractal dimension (D) of the topographic profiles, geomorphic controls and the type and frequency of abrasion feature observed. Clast transport experiments were undertaken in conjunction with the measurement of wave energy to assess transport dynamics under summer and winter (non‐storm) conditions. Platform abrasion occurred extensively during the storms. We identify two types of clast abrasion trails: simple and complex. In addition, we find two forms of erosion occur on these trails: Scratch marks and Percussion marks. An estimated 13.6 m² of the platform surface was eroded by clast abrasion on simple abrasion trails during the three storms. We attribute approximately two thirds of this to scratch‐type abrasion. The total volume of material removed by abrasion was 67 808 cm³. Despite the larger surface area affected by scratch marks, we find that the volume of material removed through percussion impact was almost seven times greater. We also find that the type and frequency of abrasion features is strongly influenced by the effect of platform morphometry on transport mode, with impact‐type abrasion dominating areas of higher platform roughness. Results of the clast transport experiments indicate that abrasion occurs under non‐storm wave energy conditions with observable geomorphological effects. We suggest that abrasion by clasts is an important component of platform erosion on high energy Atlantic coastlines, particularly over longer timescales, and that the morphogenetic link between the cliff and the platform is important in this context as the sediment supplied by the cliff is used to abrade the platform. © 2018 John Wiley & Sons, Ltd.     

How do Stability Corrections Perform in the Stable Boundary Layer Over Snow?

We assess sensible heat-flux parametrizations in stable conditions over snow surfaces by testing and developing stability correction functions for two alpine and two polar test sites. Five turbulence datasets are analyzed with respect to, (a) the validity of the Monin–Obukhov similarity theory, (b) the model performance of well-established stability corrections, and (c) the development of new univariate and multivariate stability corrections. Using a wide range of stability corrections reveals an overestimation of the turbulent sensible heat flux for high wind speeds and a generally poor performance of all investigated functions for large temperature differences between snow and the atmosphere above (>10 K). Applying the Monin–Obukhov bulk formulation introduces a mean absolute error in the sensible heat flux of \(6\,\hbox {W m}^{-2}\) (compared with heat fluxes calculated directly from eddy covariance). The stability corrections produce an additional error between 1 and \(5\,\hbox {W m}^{-2}\), with the smallest error for published stability corrections found for the Holtslag scheme. We confirm from previous studies that stability corrections need improvements for large temperature differences and wind speeds, where sensible heat fluxes are distinctly overestimated. Under these atmospheric conditions our newly developed stability corrections slightly improve the model performance. However, the differences between stability corrections are typically small when compared to the residual error, which stems from the Monin–Obukhov bulk formulation.     

Quantifying faulting and base level controls on syn‐rift sedimentation using stratigraphic architectures of coeval,adjacent Early‐Middle Pleistocene fan deltas in Lake Corinth,Greece

Quantification of allogenic controls in rift basin‐fills requires analysis of multiple depositional systems because of marked along‐strike changes in depositional architecture. Here, we compare two coeval Early‐Middle Pleistocene syn‐rift fan deltas that sit 6 km apart in the hangingwall of the Pirgaki‐Mamoussia Fault, along the southern margin of the Gulf of Corinth, Greece. The Selinous fan delta is located near the fault tip and the Kerinitis fan delta towards the fault centre. Selinous and Kerinitis have comparable overall aggradational stacking patterns. Selinous comprises 15 cyclic stratal units (ca. 25 m thick), whereas at Kerinitis 11 (ca. 60 m thick) are present. Eight facies associations are identified. Fluvial and shallow water facies dominate the major stratal units in the topset region, with shelfal fine‐grained facies constituting ca. 2 m thick intervals between major topset units and thick conglomeratic foresets building down‐dip. It is possible to quantify delta build times (Selinous: 615 kyr; Kerinitis: >450 kyr) and average subsidence and equivalent sedimentation rates (Selinous: 0.65 m/kyr; Kerinitis: >1.77 m/kyr). The presence of sequence boundaries at Selinous, but their absence at Kerinitis, enables sensitivity analysis of the most uncertain variables using a numerical model, ‘Syn‐Strat’, supported by an independent unit thickness extrapolation method. Our study has three broad outcomes: (a) the first estimate of lake level change amplitude in Lake Corinth for the Early‐Middle Pleistocene (10–15 m), which can aid regional palaeoclimate studies and inform broader climate‐system models; (b) demonstration of two complementary methods to quantify faulting and base level signals in the stratigraphic record—forward modelling with Syn‐Strat and a unit thickness extrapolation—which can be applied to other rift basin‐fills; and (c) a quantitative approach to the analysis of stacking patterns and key surfaces that could be applied to stratigraphic pinch‐out assessment and cross‐hole correlations in reservoir analysis.     

Subsidies to high seas bottom trawl fleets and the sustainability of deep-sea demersal fish stocks

The life spans of demersal species of fishes occurring in deep-waters are much longer and their potential growth rates much lower than those of related shallow water species. As a result, deep-sea demersal fish species are more vulnerable to exploitation. This is because low growth rates relative to the available market discount rate for capital makes it desirable for fishing firms to mine, rather than sustainably exploit, these resources even in the absence of fisheries subsidies. However, it is common knowledge that governments around the world do provide subsidies to their fishing industries. The objective of this contribution is to estimate the global amount of subsidies paid to bottom trawl fleets operating in the high seas, i.e., outside of the Exclusive Economic Zones of maritime countries. Our study suggests that fisheries subsidies to these fleets stand at about US$152 million per year, which constitutes 25% of the total landed value of the fleet. Economic data for bottom trawlers suggest that the profit achieved by this vessel group is normally not more than 10% of landed value. The implication of this finding is that without subsidies, the bulk of the world's bottom trawl fleet operating in the high seas will be operating at a loss, and unable to fish, thereby reducing the current threat to deep-sea and high seas fish stocks.     

Early oxidation of organic matter in pelagic sediments of the eastern equatorial Atlantic: suboxic diagenesis

Pore water profiles of total-CO₂, pH, PO^3?₄, NO^?₃ plus NO^?₂, SO^2?₄, S^2?, Fe²⁺ and Mn²⁺ have been obtained in cores from pelagic sediments of the eastern equatorial Atlantic under waters of moderate to high productivity. These profiles reveal that oxidants are consumed in order of decreasing energy production per mole of organic carbon oxidized (O₂ > manganese oxides ~ nitrate > iron oxides > sulfate). Total CO₂ concentrations reflect organic regeneration and calcite dissolution. Phosphate profiles are consistent with organic regeneration and with the effects of release and uptake during inorganic reactions. Nitrate profiles reflect organic regeneration and nitrate reduction, while dissolved iron and manganese profiles suggest reduction of the solid oxide phases, upward fluxes of dissolved metals and subsequent entrapment in the sediment column. Sulfate values are constant and sulfide is absent, reflecting the absence of strongly anoxic conditions.     

Assessing impacts of agricultural water interventions in the Kothapally watershed,Southern India

The paper describes a hydrological model for agricultural water intervention in a community watershed at Kothapally in India, developed through integrated management and a consortium approach. The impacts of various soil and water management interventions in the watershed are compared to no‐intervention during a 30‐year simulation period by application of the calibrated and validated ARCSWAT 2005 (Version 2.1.4a) modelling tool. Kothapally receives, on average, 800 mm rainfall in the monsoon period. 72% of total rainfall is converted as evaporation and transpiration (ET), 20% is stored by groundwater aquifer, and 8% exported as outflow from the watershed boundary in current water interventions. ET, groundwater recharge and outflow under no‐intervention conditions are found to be 64, 9, and 19%, respectively. Check dams helped in storing water for groundwater recharge, which can be used for irrigation, as well minimising soil loss. In situ water management practices improved the infiltration capacity and water holding capacity of the soil, which resulted in increased water availability by 10–30% and better crop yields compared to no‐intervention. Water outflows from the developed watershed were more than halved compared to no‐intervention, indicating potentially large negative downstream impacts if these systems were to be implemented on a larger scale. On the other hand, in the watershed development program, sediment loads to the streams were less than one‐tenth. It can be concluded that the hydrological impacts of large‐scale implementation of agricultural water interventions are significant. They result in improved rain‐fed agriculture and improved productivity and livelihood of farmers in upland areas while also addressing the issues of poverty, equity, and gender in watersheds. There is a need for case‐specific studies of such hydrological impacts along with other impacts in terms of equity, gender, sustainability, and development at the mesoscale. Copyright © 2011 John Wiley & Sons, Ltd.     

Identification and characterization of secondary minerals formed in tungsten mine tailings using transmission electron microscopy

Secondary minerals formed in tailings derived from a W-rich deposit were investigated in detail using transmission electron microscopy (TEM). The study focused on secondary minerals that formed in the vicinity of oxidized sphalerite [ZnS] and tennantite [Cu₁₀(Fe,Zn)₂As₄S₁₃] grains. Samples for TEM analysis were prepared directly from petrographic thin sections using a focused ion beam instrument. This method insured that spatial relationships among primary grains, secondary minerals and the pore spaces were maintained. The results from this study indicate that the secondary coatings associated with sphalerite and tennantite are composed of several discrete phases. The phases identified in this study include an Fe–Zn–As–O phase, secondary sulfides, native Cu, an Fe–Si–O phase, an In–O phase, and wulfenite [PbMoO₄]. The Fe–Zn–As–O phase precipitates directly from the pore water and the nearby primary mineral grains act as a source for some of the elements (e.g., Zn from sphalerite, As from tennantite). Secondary Cu sulfides were found at the outer margins of sphalerite and roquesite [CuInS₂] grains. It is likely that these Cu sulfides form as a result of interactions between the primary grain and aqueous Cu(II) present in the pore water, similar to what occurs in supergene environments. A secondary sulfide that was composed of variable amounts of Cu, Zn, As, Fe and S was also identified along the outer margins of tennantite. Native Cu was found in association with chalcopyrite [CuFeS₂] inclusions that were present in one of the sphalerite grains and probably represents a low-temperature secondary phase. The oxidation of chalcopyrite in the presence of aqueous Si leads to the formation of a nanocrystalline or amorphous Fe–Si–O phase. Roquesite oxidation leads to the formation of a crystalline In–O phase, which is likely dzhalindite [In(OH)₃]. Wulfenite was found in the interstitial voids present in the Fe–Zn–As–O phase suggesting that it forms by direct precipitation from the local pore water. The results from this study indicate that secondary coatings consist of complex secondary phases that may only be distinguished at the nanoscale. The TEM investigations reveal details regarding mineralogical sinks and sources for aqueous components that may otherwise be overlooked.     

Timing and thermochemical constraints on multi-element mineralisation at the Nori/RA Cu–Mo–U prospect, Great Bear magmatic zone, Northwest Territories, Canada

The timing of Cu–Mo–U mineralisation at the Nori/RA prospect in the Paleoproterozoic Great Bear magmatic zone has been investigated using Re–Os molybdenite and ⁴⁰Ar–³⁹Ar biotite geochronology. The Re–Os molybdenite ages presented are the first robust sulphide mineralisation ages derived from the Great Bear magmatic zone. Cu–Mo–U mineralisation is hosted in early to syn-deformational hydrothermal veins consisting of quartz and K-feldspar or more commonly tourmaline-biotite-quartz-K-feldspar, with associated wall-rock alteration assemblages being predominantly biotite. Sulphide and oxide minerals consist of chalcopyrite, molybdenite and uraninite with lesser pyrite and magnetite. Elevated light rare earth elements and tungsten concentrations associated with the Cu–Mo–U mineralisation have also been reported at the prospect by previous workers. Molybdenite and uraninite occur intimately in dravitic tourmaline growth zones and at grain margins, attesting to their syngenetic nature (with respect to hydrothermal veining). Two molybdenite separates yield Re–Os model ages of 1,874.4 ± 8.7 (2σ) and 1,872.4 ± 8.8 Ma (2σ) with a weighted average model age of 1,873.4 ± 6.1 Ma (2σ). Laser step heating of biotite from the marginal alteration of the wall-rock adjacent to the veins yields a ⁴⁰Ar–³⁹Ar maximum cooling age of 1,875 ± 8 Ma (MSWD = 3.8; 2σ), indistinguishable from the Re–Os molybdenite model age and a previously dated ‘syn-tectonic’ aplitic dyke in the region. Dravitic tourmaline hosts abundant primary liquid–vapour–solid-bearing fluid inclusions. Analytical results indicate liquid–vapour homogenisation at >260°C constraining the minimum temperature of mineralisation. The solids, which are possibly trapped, did not homogenise with the liquid–vapour by 400°C. Salinities in the inclusions are variable. Raman spectra identify that at least some of the solids are calcite and anhydrite. Raman spectra also confirm the vapour phases contain some CO₂; whereas clathrates or CH₄ was not observed or detected. Quartz grains only host secondary fluid inclusions, which fluoresce under ultraviolet light, indicating trapped hydrocarbons. We speculate that these resulted from Phanerozoic fluid circulation through the Proterozoic basement. The collective interpretation of the age, hydrothermal character and associated metals, high temperature and variable salinity suggests that the Nori/RA Cu–Mo–U mineralisation can be linked with the earliest stages of plutonism in the Great Bear magmatic zone. From a regional perspective, the mineralisation may pre-date the extensive multi-element mineralisation now recognised as part of the iron oxide copper–gold (IOCG) spectrum of deposits. As IOCG provinces generally contain a variety of mineralisation styles, we interpret this as the earliest phase of the extensive mineralising system.     

Modelling suspended sediment discharge in a glaciated Arctic catchment–Lake Peters,Northeast Brooks Range,Alaska

Seasonal suspended sediment transfer in glaciated catchments is responsive to meteorological, geomorphological, and glacio-fluvial conditions, and thus is a useful indicator of environmental system dynamics. Knowledge of multifaceted fluvial sediment-transfer processes is limited in the Alaskan Arctic – a region sensitive to contemporary environmental change. For two glaciated sub-catchments at Lake Peters, northeast Brooks Range, Alaska, we conducted a two-year endeavour to monitor the hydrology and meteorology, and used the data to derive multiple-regression models of suspended sediment load. Statistical selection of the best models shows that incorporating meteorological or temporal explanatory variables improves performances of turbidity- and discharge-based sediment models. The resulting modelled specific suspended sediment yields to Lake Peters are: 33 (20–60) t km⁻² yr⁻¹ in 2015, and 79 (50–140) t km⁻² yr⁻¹ in 2016 (95% confidence band estimates). In contrast to previous studies in Arctic Alaska, fluvial suspended sediment transfer to Lake Peters was primarily influenced by rainfall, and secondarily influenced by temperature-driven melt processes associated with clockwise diurnal hysteresis. Despite different sub-catchment glacier coverage, specific yields were the same order of magnitude from the two primary inflows to Lake Peters, which are Carnivore Creek (128 km²; 10% glacier coverage) and Chamberlin Creek (8 km²; 23% glacier coverage). Seasonal to longer-term sediment exhaustion and/or contrasting glacier dynamics may explain the lower than expected relative specific sediment yield from the more heavily glacierized Chamberlin Creek catchment. Absolute suspended sediment yield (t yr⁻¹) from Carnivore Creek to Lake Peters was 27 times greater than from Chamberlin Creek, which we attribute to catchment size and sediment supply differences. Our results provide a foundational understanding of the current sediment transfer regime and are useful for predicting changes in fluvial sediment transport in glaciated Alaskan Arctic catchments.