Estimation of debris‐flow magnitude in the Eastern Italian Alps

The estimation of debris‐?ow magnitude is an essential step in the assessment of debris‐?ow hazard. Although different methods have been developed for the assessment of debris‐?ow magnitude, this is still a dif?cult task because of the complexity of ?ow processes and the lack of data to test estimation procedures in many mountainous regions. Data on debris‐?ow magnitude from 127 basins in the Eastern Italian Alps have been collected from scienti?c and technical journals, technical reports, historical documents gathered from local archives, and ?eld surveys. These data were used to develop and test different predictive approaches, encompassing regression equations, geomorphological surveys and probabilistic analysis of time series. Regression techniques were used to correlate debris‐?ow magnitude to morphometric parameters and geological characteristics of the basins. Values of the channel debris yield rate (contribution per unit length of channel), proposed in the literature, were compared with data from the study area for identifying reference values for channel stretches of different morphological characteristics. Although limited to the few basins in which suf?cient data were available, the probabilistic analysis of time series of debris‐?ow magnitude provides indications about the relations between magnitude and frequency of debris ?ows. Some observations about the capability and drawbacks of considered methods are presented and the combined use of different approaches for the estimation of debris‐?ow magnitude is suggested. Copyright © 2004 John Wiley & Sons, Ltd.     

Modelling the heat pulses generated on a fault plane during coseismic slip: Inferences from the pseudotachylites of the Copanello cliffs (Calabria, Italy)

A pseudotachylite vein network crosscutting late Hercynian foliated tonalites can be observed along the Copanello cliffs (Calabria, Southern Italy). Pseudotachylites formed during the Oligocene–Miocene at intermediate crustal levels (ca. 10 km). They show variable thickness ranging from few mm up to 10 cm, as observed in injection veins branching from the fault plane. Microscopic observations indicate that pseudotachylite matrix mainly consists of plagioclase (An₄₆–An₅₈) and biotite microlites. Rounded clasts of quartz, plagioclase or of plagioclase–quartz lithic fragments are disseminated in the matrix. Intergranular, flow and spherulitic textures are commonly observed. Microstructural features are consistent with rapid crystallisation from melt. EDS analyses of rare and tiny glass veins indicated a trachyandesite or An₅₀ plagioclase melt composition.The conditions for pseudotachylite formation were reproduced by an analytical model taking into account the heat released by friction along a horizontal fault plane during a seismic event. The model is based on a three-stage rupture history that includes nucleation, propagation and stopping. In addition, by means of a numerical approach, the model reproduces cooling that follows the stopping stage.According to previous studies, the thermal perturbation induced by fault displacement is very intense. In fact, temperatures exceeding the tonalite and even An₅₀ plagioclase liquidus (1470 °C) are reproduced by small amount of slip (≤ 6 cm) in suprahydrostatic regime. On the other hand, the thermal perturbation is strongly localised and of short duration. Peak temperatures abruptly decrease at a short distance from the fault plane (typically in few millimetres). In these conditions a thin film of melt can be produced. Therefore, the presence of cm-scale pseudotachylite veins can be only explained assuming an efficient and fast melt migration towards dilatant sites, such as pull-apart structures and injections veins. Results of the model may be useful to predict the thermal disturbance produced by earthquakes of low intensity.     

Temperature and density of the Tyrrhenian lithosphere and slab and new interpretation of gravity field in the Tyrrhenian Basin

The gravity anomaly field of the Tyrrhenian basin and surrounding regions reflects the complex series of geodynamic events active in this area since the Oligocene–Miocene. They can resume in lithospheric thinning and asthenospheric rising beneath the Tyrrhenian Basin, coexisting with the roll-back subduction of the African plate margin westward sinking beneath the Calabrian Arc. The geographic closeness between these processes implies an intense perturbation of the mantle thermal regime and an interference at regional scale between the related gravity effects.A model of the litho-asthenospheric structure of this region is suggested, showing a reasonable agreement with both the evidences in terms of regional gravity anomaly pattern and the results concerning thermal state and petro-physical features of the mantle. The first phase of this study consisted of the computation of the isotherms in the crust–mantle system beneath the Tyrrhenian Basin and, afterwards, of the density distribution within the partially melted upwelling asthenosphere. The second phase consisted of a temperature/density modelling of the slab subducting beneath the Calabrian Arc. Finally, a 2^1 / 2 interpretation of gravity data was carried out by including as constraints the results previously obtained. Thus, the final result depicts a model matching both gravity, thermal and petrographic data. They provide (a) a better definition of the thermal regime of the passive mantle rise beneath the Tyrrhenian basin by means of the estimation of the moderate asthenospheric heating and (b) a model of lithospheric slab subducting with rates that could be smaller than generally suggested in previous works.     

Analysis of the Major Fe Bearing Mineral Phases in Recent Lake Sediments by EXAFS Spectroscopy

Extended X-ray absorption fine structure (EXAFS) spectroscopy and chemical analyses were combined to determine the Fe bearing minerals in recent lake sediments from Baldeggersee (Switzerland). The upper section of a laminated sediment core, deposited under eutrophic conditions, was compared to the lower part from an oligotrophic period. Qualitative analysis of FeK EXAFS agreed well with chemical data: In the oligotrophic section Fe(II)–O and Fe(III)–O specieswere present, whereas a significant fraction of Fe(II)–S sulfides was strongly indicated in the eutrophic part. A statistical analysis was performed by least square fitting of normalized reference spectra. The set of reference minerals included Fe(III) oxides and Fe(II) sulfides, carbonates and phosphates. In the oligotrophic regime no satisfying fit was obtained using the set of reference spectra, indicating that siderite (FeCO₃) was not present in a significant amount in these carbonate-rich sediments. Simulated EXAFS spectra for a(Ca_x, Fe_1-x)CO₃solid solution allowed reconstructing the specificfeatures of the experimental spectra, suggesting that this phase was the dominant Fe carrier in the oligotrophic section of the core. In the eutrophic part, mackinawite was positively identified and represented the dominant Fe(II) sulfide phase. This finding agreed with chemical extraction, which indicated that18–40 mol% of Fe was contained in the acid volatile iron sulfide fraction. EXAFS spectra of the eutrophic section were best fitted by considering the admixture of mackinawite and the Fe–Ca carbonate phase inferred to be predominant in the oligotrophic regime.     

Heat flow and geodynamics in the Tyrrhenian Sea

The present heat flow in the southern Tyrrhenian Sea appears as a transient thermal wave that has migrated eastward in time. The higher heat flow in the south‐eastern side of the basin confirms the suggestion of an eastward‐migrating rift. Punctuation of the Tyrrhenian backarc extension in lithospheric boudins is accompanied by a concentrated increase in heat flow generated by asthenospheric intrusions and related magmatism progressively moving eastward. The migration of the asthenosphere in the same direction could explain these phenomena.     

Linking the recruitment and survivorship of a freshwater stream-specialist fish species to flow metrics in Mediterranean climate temporary streams

Novel modelling was utilised in the present study to reveal significant relationships between the abundance of the Australian freshwater stream-specialist fish Galaxias olidus and metrics defining flow regimes across a region dominated by temporary streams. It was revealed that increases in total abundance were linked to metrics (both 1- and 3-year periods) that indicate greater water availability and the persistence of water in pools across the year, namely the average duration of zero-flow days over the low-flow season (negatively) and total duration of bankfull flows across the year (positively). The analysis identified 3-year metrics as being more important to the abundance of 0+ fish rather than annual ones. Taken together, these findings describing the flow requirements of a stream specialist will help to guide implementation of environmental flows, but will also highlight the need for continued exploration of flow–ecology relationships.     

Effects of water quality on infiltration,runoff and interrill erosion processes during simulated rainfall

This paper discusses the effects of water quality on the hydrological and erosion response of non‐saline, non‐sodic soils during simulated rain experiments. It is well known that rain water quality affects the behaviour of saline soils. In particular, rain simulation experiments cannot be run using tap water if realistic values of infiltration rates and soil erosion are to be found. This paper reports on similar effects for non‐saline, non‐sodic soils. Two soils – a well‐aggregated clay‐rich soil developed on marine silty clay deposits and a soil developed on silt loam – were selected and subjected to a series of simulated rainstorms using demineralized water and tap water. The experiments were conducted in two different laboratories in order to obtain results independent of the tap water quality or the rainfall simulator characteristics. The results indicate that time‐to‐ponding is largely delayed by solute‐rich water (tap water). When tap water is used, infiltration rates are significantly overestimated, i.e. by more than 100 per cent. Interrill erosion rates increase by a factor of 2·5–3 when demineralized water is used. The silty clay soil was more affected by the water quality than the silt loam soil, with respect to infiltration and runoff production. Regarding interrill erosion rates, the two tested soils were similarly affected by the water quality. Therefore, it can be concluded that rainfall simulation experiments with non‐dispersive soils (e.g. non‐saline, non‐sodic) must also be conducted using water with very low electrical conductivity (i.e. less than 30–50 µS cm⁻¹), close to that of distilled water. The use of tap water certainly hampers comparisons and the relative ranking of the hydrological and erosion response of different soils, while parameter values, such as final infiltration rate or time‐to‐ponding, cannot be extrapolated and extended to natural situations. Therefore, the majority of hydrological and erosion models and parameter values measured during rainfall simulations in the past should be used with caution for all types of soils. Copyright © 2001 John Wiley & Sons, Ltd.     

Historical analysis of heavy metal pollution in three estuaries on the north coast of Galicia (NW Spain)

This research focuses on the development of metal pollution in sediment cores from three estuaries in Northwest Spain: Viveiro, Ortigueira and Barqueiro. Pb, Cu, Co, Cr, Cd and Zn and total organic carbon were assessed using principal component analysis (PCA) in order to obtain background values, measure pollution levels and identify pollution sources. Results were interpreted by considering the local industrial history, grain size and C/N relationship. The pollution levels obtained bear a strong resemblance to those documented for of a moderately industrialised area. PCA identifies factors that reflect mainly temporal associations with metals. Sedimentation rates between 0.9 and 1.1 cm/year were determined. In Viveiro core levels of Cr pollution are associated with tanneries. In Ortigueira, high core levels of Cu and Co are linked to mining, and Cr levels to adjacent ultramafic rocks. Erosion of Holocene sediment causes high values of Co and Cr in the Barqueiro core. Cu increase in the three estuaries is related to fungicide use since 1910. Sea level rise appears to be affecting the marine characteristics of the sediments in Barqueiro. In Viveiro, the nature of the sediment reflects engineering work and land reclamation.