Role of the Damping Ratio of Reinforcement on the Behaviour of Geogrids-Reinforced Systems

In this paper, the behaviour of a real geogrids reinforced embankment will be analysed based on the results of numeric modelling in seismic conditions. The reinforced slope is analysed using commercial software based on the finite differences method. After the program presentation, is described the methodology of analysis. In modelling, will be devoted special relevance to the behaviour of the structures in terms of deformations, using comparative analyses with different damping ratio values for soils and for reinforcements. Finally, will be drawn some conclusions concerning the behaviour of reinforced structures and in particular, the role of the structural reinforcement’s damping.     

In situ experimental decomposition studies in estuaries: A comparison of Phragmites australis and Fucus vesiculosus

The decomposition rates of Phragmites australis and Fucus vesiculosus were experimentally determined in an estuarine system using the leaf-bag technique. The study was conducted in fifteen sites arranged in five areas, extending from freshwater, outside the tidal range, to the marine environment, near the mouth of the estuary. The leaf-bags (5 mm mesh), were set up with 3.0 g of dried substrate, submerged in the experimental sites at day 0 and collected at days 3, 7, 15, 30 and 60, to follow biomass loss. The biomass loss through the leaching phase (day 3) was about 16% for Phragmites australis and 33% for Fucus vesiculosus and was independent of salinity for both substrates. The difference in the remaining biomass between the two species increased with time and the decomposition rates differed along the salinity gradient. For F. vesiculosus, the decomposition rate was highest near the mouth of the estuary, corresponding to the preferential distribution area of the algae, and decreased towards freshwater. For Phragmites australis, the fastest decay was observed in the mid estuary, where Phragmites australis occurs naturally, confirming previous studies. The decomposition rates measured at different time intervals (0–15, 0–30 and 0–60 days) were always higher for the algae and decreased with time for both species. These results indicate that the use of decomposition rates as a measure of ecosystem integrity or quality status in transitional waters will not be straightforward and must take into account, among others, the test species, the study area positioning along the estuarine gradient, and the time interval for the calculation of the decomposition rate.     

Downscaling projections of climate change in Sao Tome and Principe Islands,Africa

Sao Tome and Principe is a small insular African country extremely vulnerable to rising sea levels and impacts such as inundation, shore line change, and salt water intrusion into underground aquifers. Projections of climate change have considered coarse model resolutions. The objective of this work is to dynamically downscale the global model projections to 4-km resolution and to assess the climate change in the Sao Tome and Principe islands. The global climate projections are provided by the Canadian Earth System Model under two Representative Concentration Pathways greenhouse gas scenarios, RCP4.5 and RCP8.5. The downscaling is produced by the Eta regional climate model. The baseline period is taken between 1971 and 2000, and the future climate period is taken between 2041 and 2070. The 2-m temperature simulations show good agreement with station data. The model simulates temperature more accurately than precipitation. The precipitation simulations systematically show underestimation and delay of the rainy and the dry seasons by about 1 month, a feature inherited from the global climate model. In the middle of the 21st century, projections show the strongest warming in the elevated parts of the Sao Tome Island, especially in February under RCP8.5. Warmer nights and warmer days become more frequent in the islands when compared with those in the present. While under RCP4.5, precipitation increases in the islands; under RCP8.5, it decreases everywhere in both islands. Heavy precipitation rates should increase, especially in the south-southwestern parts of the Sao Tome islands. Detailed spatial variability of the temperature and precipitation changes in the islands can only be revealed at very high spatial model resolution. Implications for the potential energy production from two major river basins are assessed in this work.     

Lava lakes on Io: observations of Io's volcanic activity from Galileo NIMS during the 2001 fly-bys

Galileo's Near-Infrared Mapping Spectrometer (NIMS) obtained its final observations of Io during the spacecraft's fly-bys in August (I31) and October 2001 (I32). We present a summary of the observations and results from these last two fly-bys, focusing on the distribution of thermal emission from Io's many volcanic regions that give insights into the eruption styles of individual hot spots. We include a compilation of hot spot data obtained from Galileo, Voyager, and ground-based observations. At least 152 active volcanic centers are now known on Io, 104 of which were discovered or confirmed by Galileo observations, including 23 from the I31 and I32 Io fly-by observations presented here. We modify the classification scheme of Keszthelyi et al. (2001, J. Geophys. Res. 106 (E12) 33 025-33 052) of Io eruption styles to include three primary types: promethean (lava flow fields emplaced as compound pahoehoe flows with small plumes <200 km high originating from flow fronts), pillanian (violent eruptions generally accompanied by large outbursts, >200 km high plumes and rapidly-emplaced flow fields), and a new style we call “lokian” that includes all eruptions confined within paterae with or without associated plume eruptions). Thermal maps of active paterae from NIMS data reveal hot edges that are characteristic of lava lakes. Comparisons with terrestrial analogs show that Io's lava lakes have thermal properties consistent with relatively inactive lava lakes. The majority of activity on Io, based on locations and longevity of hot spots, appears to be of this third type. This finding has implications for how Io is being resurfaced as our results imply that eruptions of lava are predominantly confined within paterae, thus making it unlikely that resurfacing is done primarily by extensive lava flows. Our conclusion is consistent with the findings of Geissler et al. (2004, Icarus, this issue) that plume eruptions and deposits, rather than the eruption of copious amounts of effusive lavas, are responsible for Io's high resurfacing rates. The origin and longevity of islands within ionian lava lakes remains enigmatic.     

What is wrong with post-fire soil erosion modelling? A meta-analysis on current approaches,research gaps,and future directions

In the near future, a higher occurrence of wildfires is expected due to climate change, carrying social, environmental, and economic implications. Such impacts are often associated with an increase of post-fire hydrological and erosive responses, which are difficult to predict. Soil erosion models have been proven to be a valuable tool in the decision-making process, from emergency response to long-term planning, however, they were not designed for post-fire conditions, so need to be adapted to include fire-induced changes. In recent years, there have been an increasing number of studies testing different models and adaptations for the prediction of post-fire soil erosion. However, many of these adaptations are being applied without field validation or model performance assessment. Therefore, this study aims to describe the scientific advances in the last 20 years in post-fire soil erosion modelling research and evaluate model adaptations to burned areas that aim to include: (i) fire-induced changes in soil and ground cover; (ii) fire-induced changes in infiltration; (iii) burn severity; and (iv) mitigation measures in their predictions. This study also discusses the strengths and weaknesses of these approaches, suggests potential improvements, and identifies directions for future research. Results show that studies are not homogeneously distributed worldwide, according to the model type used or by region most affected by wildfire. During calibration, 73% of cases involved model adaptation to burned conditions, and only 21% attempted to accommodate new processes. Burn severity was addressed in 75% of cases, whilst mitigation measures were simulated in 27%. Additionally, only a minor percentage of model predictions were validated with independent field data (17%) or assessed for uncertainties (13%). Therefore, further efforts are required in the adaptation of erosion models to burned conditions, to be widely used for post-fire management decisions. © 2020 John Wiley & Sons, Ltd.     

Material screening and selection for XENON100

Results of the extensive radioactivity screening campaign to identify materials for the construction of XENON100 are reported. This dark matter search experiment is operated underground at Laboratori Nazionali del Gran Sasso (LNGS), Italy. Several ultra sensitive High Purity Germanium detectors (HPGe) have been used for gamma ray spectrometry. Mass spectrometry has been applied for a few low mass plastic samples. Detailed tables with the radioactive contaminations of all screened samples are presented, together with the implications for XENON100.     

Limit Equilibrium Analyses for Internal Design of Geosynthetic Reinforced Slopes: Influence of Potential Failure Surface and Strength Distribution

The paper presents results from a computer code, based on limit equilibrium analyses, able to quantify earth pressure coefficients for the internal design of geosynthetic reinforced soil structures and identify the potential failure surfaces. Failure mechanisms assuming bilinear or logarithmic spiral failure surfaces are considered. The influence of the potential failure surface and geosynthetic strength distribution on the earth pressure coefficient is analysed. Required reinforcement tensile strengths calculated by the developed program are compared with values published in the literature. To further evaluate the capabilities of limit equilibrium analyses, the numerical modelling of a geosynthetic reinforced steep slope, designed at ultimate limit state conditions (FS = 1), is also presented. Good agreement was achieved between the potential failure surfaces predicted by limit equilibrium analyses and those obtained with numerical modelling.