上海陆域地区古河道溺谷相沉积层工程地质特征研究

上海地区全新世沉积物在区域上分异剧烈,由此,研究区内形成主要的古河道有四条。按其沉积相的层序组合可划分出三个基本类型,每个类型和古河道溺上各层序组合,反映了一种沉积环境和沉积过程。同时,它们的工程地质特征亦各自不同。本文对三个基本类型的古河道溺谷相沉积的桩基持力层的选择,应用找到了充分的依据。     

三维复杂域非结构化六面体网格全自动生成方法

使用自适应有限单元法在三维复杂域内求解水工及岩土工程问题,讨论了应用行波法在多介质三维复杂块体内六面体单元网格的自动生成过程。其特点是对不规则区域具有较强的适应性,并考虑了节理单元的自动生成。     

江西雅山花岗岩长石中磷的分布及意义

雅山富氟高磷花岗岩具较高的全岩磷含量（０．１５％～０．５５％）,长石是磷的主要赋存矿物,磷以ＰＡｌＳｉ－２替换方式进入长石结构中。各种结晶习性的长石的磷含量各不相同。早世代钠长石和雪球结构中钠长石包裹体的结晶较早,平均磷含量分别为０．１８％和０．１９％,而晚世代钠长石和环带钾长石中钠长石嵌晶的结晶稍晚,具较高的平均磷含量（分别为０．２５％和０．２３％）。钾长石的磷含量相对于钠长石总体上较低,早期结晶的雪球结构主晶钾长石和环带钾长石的磷含量最低,分别为０．０４％和０．０２％,晚期细粒钾长石的平均磷含量略高（０．１９％）。长石对全岩磷的贡献率还与磷锂铝石等磷酸盐副矿物是否达到饱和有关,当无磷锂铝石结晶时,长石磷的贡献率约为７６％,反之则约为３１％。     

西藏察隅地区古元古代德玛拉岩群的特征

西藏察隅地区出露一套由片岩、片麻岩、变粒岩夹斜长角闪岩及大理岩等组成的中深变质岩系。通过岩石学、岩石地球化学、同位素地质学及原岩建造的研究,并采用构造—岩层—事件方法的分析与对比,新建立了墨色同岩组和蛇躲岩组两个岩石地层单位,统称为德玛拉岩群。依据Ｓｍ Ｎｄ法年龄２１４５～２２６４Ｍａ将其时代确定为古元古代。该岩群与印度马德拉斯和斯里兰卡形成于２３００～２１００Ｍａ的孔达岩系十分相似,可能是冈瓦纳古陆核北缘的一套浅海相沉积     

导水裂隙带高度预测途径探讨

导水裂隙带高度是设计防水煤（岩）柱尺寸的主要技术参数，是煤矿防治水工作的重要内容。详细论述了其研究现状及发展趋势，并提出了履岩体地质环境，履岩体力学环境和数值模拟技术三位一体的综合预测评价方法。     

基于POGIL理论的地理研学旅行设计研究——以山东省沂河滨河湿地研学为例

研学旅行是中小学开展综合实践活动的重要方式,本文以山东省沂河滨河湿地研学为例,使用“过程取向-指导式探究学习”理论,以问题为导向,提高学生发现问题、解决问题的能力,提高地理实践力。     

基于一维综合孔径微波辐射计的海面温度反演研究

Due to the low spatial resolution of sea surface temperature(T_S) retrieval by real aperture microwave radiometers,in this study, an iterative retrieval method that minimizes the differences between brightness temperature(T_B)measured and modeled was used to retrieve sea surface temperature with a one-dimensional synthetic aperture microwave radiometer, temporarily named 1 D-SAMR. Regarding the configuration of the radiometer, an angular resolution of 0.43° was reached by theoretical calculation. Experiments on sea surface temperature retrieval were carried out with ideal parameters; the results show that the main factors affecting the retrieval accuracy of sea surface temperature are the accuracy of radiometer calibration and the precision of auxiliary geophysical parameters. In the case of no auxiliary parameter errors, the greatest error in retrieved sea surface temperature is obtained at low T_S scene(i.e., 0.710 6 K for the incidence angle of 35° under the radiometer calibration accuracy of0.5 K). While errors on auxiliary parameters are assumed to follow a Gaussian distribution, the greatest error on retrieved sea surface temperature was 1.330 5 K at an incidence angle of 65° in poorly known sea surface wind speed(W)(the error on W of 1.0 m/s) over high W scene, for the radiometer calibration accuracy of 0.5 K.     

中国南极长城湾及附近海区1993/1994年夏季表层水样无机氮、磷酸盐的浓度及其分布状况

1993／1994年南极夏季对中国南极长城湾及附近海区表层海水四种营养盐浓度及其分布状况作了调查。结果表明，NH4－N、NO3－N、NO2－N及PO4－P的大致浓度分别是2．13、7．07、0．74和1．12μg·dm-3。一般来说，湾内高于湾外氮盐于12月份常出现高值。四种形态的无机盐类之最高、最低浓度出现的时间和站位不尽一致。∑N／P递减次序大致是12月，2月，1月。水温变化与NH4－N、PO4－P浓度和∑N／P的变化常较一致，而与NO2－N则常不一，一些站位上营养盐浓度偏低可能与浮游植物摄取有关。结果显示了调研海区的浅水内湾特征。浮游植物所需营养充分。该湾仍维持正常状态。     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.