Study on the natural radioactivity level of stone coal-bearing strata in East China

Based on γ-radiation dose rate and radon concentration measurements and ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K radionuclide testing, this study identifies the radioactive anomalies of stone coal-bearing strata in East China and evaluates the natural radioactivity levels in the air, solid, water and plant media in the typical area of the regional stone coal-bearing layers. The stone coal-bearing strata in East China occur in the lower Cambrian system along the margin of the Yangtze block; additionally, the radioactive anomaly area is sporadically distributed in the stone coal-bearing layers. The background values of ²³⁸U, ²³²Th, ²²⁶Ra, and ⁴⁰K are higher in the stone coal-bearing areas, and the spatial distribution of these natural radionuclides shows significant variability. ²³⁸U and ²²⁶Ra clearly accumulate in the coal, coal gangue and soil and are the main sources of the environmental radiation in coal mines. The γ-radiation shows a higher background value in the stone coal-bearing area, and this radioactive pollution cannot be ignored. Typically, the effective dose of γ-radiation exceeds the limit value of 5 mSv/a, and the total α and total β concentrations of the groundwater are 10–30 times the limit value at some points. The residents near the mining area are subjected to a higher radiation dose, and the groundwater, building materials, and plants have been contaminated by the radioactive pollution sporadically through time. It is necessary to strengthen the monitoring work of radioactive environments and to take appropriate control measures.     

Sealing efficiency analysis for shallow-layer caprocks in CO<Subscript>2</Subscript> geological storage

The CO₂ migrated from deeper to shallower layers may change its phase state from supercritical state to gaseous state (called phase transition). This phase transition makes both viscosity and density of CO₂ experience a sharp variation, which may induce the CO₂ further penetration into shallow layers. This is a critical and dangerous situation for the security of CO₂ geological storage. However, the assessment of caprock sealing efficiency with a fully coupled multi-physical model is still missing on this phase transition effect. This study extends our previous fully coupled multi-physical model to include this phase transition effect. The dramatic changes of CO₂ viscosity and density are incorporated into the model. The impacts of temperature and pressure on caprock sealing efficiency (expressed by CO₂ penetration depth) are then numerically investigated for a caprock layer at the depth of 800 m. The changes of CO₂ physical properties with gas partial pressure and formation temperature in the phase transition zone are explored. It is observed that phase transition revises the linear relationship of CO₂ penetration depth and time square root as well as penetration depth. The real physical properties of CO₂ in the phase transition zone are critical to the safety of CO₂ sequestration. Pressure and temperature have different impact mechanisms on the security of CO₂ geological storage.     

Reservoir architecture and fracture characterization of low-permeability sandstone reservoir: a case study of Biandong oilfield,Jinhu depression,northern Jiangsu Basin,China

Fracture is one of the most important factors through the whole process of low-permeability reservoir development. Biandong oilfield is a typical low-permeability fractured sandstone reservoir, and has stepped into high water cut stage; thus, the waterflooding effect is poor. Therefore, many contradictions such as high moisture content, decreasing production speed, and low recovery efficiency are becoming increasingly prominent, which have seriously hindered the sustainable development, and need to be solved urgently. However, few such studies on reservoir characterization in low-permeability fractured sandstone reservoir have been conducted in China. In this study, through comprehensive analysis on reservoir characterization and sedimentary environment, significant results are achieved. Three types of fracture occurrence are identified; they are high-angle fracture, low-angle fracture, and horizontal fracture, respectively. Two types of reservoir pore (primary porosity and secondary porosity) are recognized based on thin-section observation and analysis. The diagenetic stage of Biandong oilfield are divided into three stages, early A, early B, and late A, respectively. Finally, a regional discrete fracture network model is established with Fisher’s algorithm based on three-dimensional geological model. All the research results presented above can make a significant instructing function for making reservoir development plan and improving recovery efficiency.     

Ion chemistry of groundwater and the possible controls within Lhasa River Basin,SW Tibetan Plateau

In order to study the major ion chemistry and controls of groundwater, 65 groundwater samples were collected and their major ions measured from wells within Lhasa River Basin. Groundwater has the characteristics of slightly alkaline and moderate total dissolved solid (TDS). TDS concentration ranged from 122.0 to 489.9 mg/L with a median value of 271.2 mg/L. Almost all the groundwater samples suited for drinking and irrigation. The major cations of groundwater are Ca²⁺ and Mg²⁺, accounting for 59.6 and 31.3% of the cations, respectively. Meanwhile, HCO₃^? and SO₄^2? constituted about 56.7 and 36.9% of the anions, respectively, in Lhasa River Basin. The hydrochemical type of groundwater is HCO₃-SO₄-Ca-Mg. The chemical composition of groundwater samples located in the middle of Gibbs model, which indicates that the major chemical process of groundwater is controlled by rock weathering. Carbonate weathering was the dominant hydro-geochemical process controlling the concentration of major ions in groundwater within Lhasa River Basin, but silicate weathering also plays an important role.     

Assessment of water inrush risk using the principal component logistic regression model in the Pandao coal mine,China

In order to improve the accuracy of floor water inrush assessment, the risk prediction model of floor water inrush was established by combining the principal component logistic regression analysis (PCLRA) and GIS spatial geographic analysis. In this paper, the geological data of Pandao coal mine was taken as the engineering background. First of all, main controlling factors of floor water inrush were determined and quantified. Next, PCLRA was used to determine the weight of each factor and establish the mathematical model for predicting the floor water inrush. And then, GIS’s spatial analysis and data processing function was used to draw related single factor thematic maps. Related thematic maps were weighted superposed to draw a floor water inrush zoning map based on PCLRA mathematical model. The study areas were divided into five levels by Jenks optimization method and vulnerability index initial model. And the corresponding threshold range was determined. The results show that (1) the high sensitivity factors in floor failure depth were added to evaluate the water inrush, and the fault fractal dimension was used to replace the fault structure related factors, and the main controlling factors of floor water inrush are more comprehensive; (2) the fitting degree of PCLRA model is high and the test accuracy is 83.3%; (3) the prediction results were well fitted to the actual position of water inrush (three water inrush points are located in the dangerous area, and two water inrush points are located in the relatively dangerous area).     

渝东北城口地区Y1井页岩有机地球化学特征及勘探前景

基于钻井资料,以总有机碳(TOC)、干酪根显微组分、等效镜质体反射率(Ro)及碳同位素等测试数据系统分析了渝东北城口地区Y1井五峰组—龙马溪组页岩的有机地球化学特征,利用页岩流体包裹体的显微特征、均一温度及激光拉曼数据深入分析了Y1井页岩气成藏特征。结果表明:Y1井上奥陶统五峰组—下志留统龙马溪组炭质页岩发育,TOC含量2%的富含有机质页岩厚度达83 m,干酪根类型以Ⅰ型干酪根为主,处于湿气生烃阶段。页岩裂缝脉体中大量烃包裹体和富含甲烷气体的含烃盐水包裹体证实城口地区五峰组—龙马溪组页岩发生了充足页岩气供给,具有高均一温度、高盐度的伴生盐水包裹体表明城口地区页岩气成藏时期的保存条件良好。这些Y1井页岩有机地球化学特征研究成果揭示了城口地区下古生界具备良好的页岩气勘探前景。     

新疆西昆仑汗铁热克一带侏罗纪沉积相与沉积环境分析

新疆西昆仑汗铁热克一带地处塔里木盆地西南缘,构造上属塔里木盆地与西昆仑造山带的结合部位,侏罗纪地层包括积莎里塔什组、康苏组、扬叶组、塔尔尕组和库孜贡苏组。根据岩性、颜色、粒度分析及沉积相标志等方法,将汗铁热克一带侏罗纪沉积环境与沉积相划分为冲积扇、扇三角洲和湖泊相,其沉积特征为侏罗纪早期快速充填,中期稳定沉降,晚期短暂的沉积间断后充填,并系统分析了研究区在整个侏罗纪沉积环境演化规律。     

Petrophysical characterisation of tight sandstone gas reservoirs using nuclear magnetic resonance: a case study of the upper Paleozoic strata in the Kangning area,eastern margin of the Ordos Basin,China

Residual and movable porosity are significant parameters for characterising petrophysical properties, especially in tight reservoirs. Eight tight sandstone samples from the upper Paleozoic gas-bearing strata in the Kangning area, from the eastern margin of the Ordos Basin, were analysed using nuclear magnetic resonance (NMR), scanning electron microscopy (SEM), petrography, and porosity and permeability tests. The lithology and pore types were identified and classified using petrography and SEM. The residual and movable porosity were obtained with NMR. In addition, NMR was used to visualise pore structure and pore size distribution. The results suggest that the upper Paleozoic sandstones in the study area mainly comprise feldspathic litharenite and litharenite. The sandstone porosity and permeability are low, with means of 5.9% and 0.549 mD, respectively. Four pore types exist in the tight sandstones: residual primary pores, grain dissolution pores, micropores (clay-dominated) and microfractures. The T₂ spectra under water-saturated conditions correlate with pore size and can be used to distinguish small and large pores based on the transverse relaxation time cutoff value of 10 ms, which corresponds to a pore diameter of 0.232 μm. Small pores account for 72% of the pores in the tight sandstones. The continuous bimodal T₂ spectra suggest good connectivity between small and large pores, despite the low porosity and permeability. In this study, the movable porosity of the major tight sandstone gas reservoirs is higher than the residual porosity, which confirms the effective evaluation of movable porosity to tight sandstone reservoirs, based on NMR experiments.     

Correction to: Assessing real options in urban surface water flood risk management under climate change

Windblown dust originating in China and Mongolia causes health effects and agricultural damage in its source areas and causes Asian dust events in Japan. An early warning system that could be combined with weather forecasts would be helpful in preventing serious damage. However, it is difficult to specify source areas of dust with current dust modeling systems because land surface information, including vegetation coverage and land surface soil water content, is inadequate. To find and monitor dust source regions, a semi-real-time dust erodibility map was developed based on MODIS satellite data that focuses particularly on the threshold wind speed in a target area of northeast Asia including China and Mongolia (35°–50°N, 75°–120°E). The mapping system incorporates satellite data on snow cover, areas of frozen soil, surface soil water content, and vegetation cover.     

An agent-based evacuation model for the 2011 Brisbane City-scale riverine flood

In this study, an agent-based model is proposed in order to provide new insights into the policy analysis and strategy assessment of city-scale evacuation management. The proposed model is suitable for assessment of the influence of different departure times and communications among peer evacuees on the number of residents at risk who arrive at official shelters. A case study is applied to build a simulation model for the coastal city of Brisbane in Australia. The Brisbane River catchment experiences regular flooding almost every year; the second severest flood since the twentieth century occurred in 2011. During that event, over 15,000 properties were inundated and around 3600 households evacuated in metropolitan Brisbane alone. Making use of high-performance computing clusters, the evacuation simulation was coupled with results from a validated hydrodynamic model to test a variety of escaping scenarios based on the 2011 flood situation. This case study demonstrates the proposed model’s capacity to represent the dynamic evacuation process and also shows that the model is able to help develop flood emergency plans and evaluate response measures through exploring key elements in a range of scenarios.