A contrast of two typical LUCC processes and their driving forces in oases of arid areas: A case study of Sangong River Watershed at the northern foot of Tianshan Mountains

Aerial photographs taken in 1978 and 1987, Landsat TM images in 1998 as well as soil, hydrology and socio-economic data for the oases in Sangong River Watershed were processed by Remote Sensing (RS) and Geographic Information System (GIS). There are two typical agricultural land uses in oases, Farm-based Land Use with large-scale intensified agricultural activities (FLU) and Household Responsibility-based Land Use with small-scale activities (HRLU). The Index Model of Land Use/Land Cover Change (LUCC), Weighted Index Sum (WIS) and logistic stepwise regression model were established to contrast the two typical LUCC processes and their driving forces. The land use patterns were dominated by cropland and grassland for the entire region, and cropland, residential and industrial land were increasing stably. In the HRLU areas, woodland and grassland declined dramatically, but in the FLU areas, grassland decreased only by 12.0%, whereas woodland increased by 13.7%. LUCC was stronger in the earlier stage (1978–1987) than in the later stage (1987–1998) for the entire region. LUCC was more intense in the HRLU areas than in the FLU areas during the entire period (1978–1998). Policy was a key factor in the land use change, and water resources were a precondition in land use. Under the control of policy and water resources, the main human driving factors included population and economy, and the main natural restrictions were soil fertility and groundwater depth. Human driving factors controlled the land change in the HRLU areas, but natural restriction factors dominated in the FLU areas. In the mean time, intensification of LUCC in the region had some spatiotemporal implications with a fluctuation of impact factors.     

Combined perturbation on near-earth satellite orbits

Using a semi-analytical method, we have obtained a first-order solution of the equations of motion of near-Earth satellites under the combined perturbing effect due to Earth's figure and air drag.     

帕米尔东北缘地区构造变形特征与盆山结构

帕米尔东北缘乌泊尔地区是正确认识帕米尔北缘盆山结构和构造变形特征非常关键的地区,本文利用连续电磁剖面(CEMP)资料和地震资料,并结合野外地质调查资料和钻井资料,对帕米尔东北缘乌泊尔地区的盆山结构和构造变形特征进行了研究。认为帕米尔东北缘及其以北地区的盆山结构表现为帕米尔造山带向北冲断和南天山向南冲断所形成的对冲结构; 帕米尔山前为基底卷入式构造,古生界—中生界沿高角度的逆冲断层推覆到新近系和第四系之上,形成山前的古生界—中生界逆冲推覆带; 北侧由受乌泊尔断裂控制的深部隐伏冲断体系和浅部的第四纪背驮盆地所构成。研究区的新生代构造变形时间开始于上新世晚期,并持续变形至今,形成了下更新统西域组（Q1x）与下伏上新统、Q2与Q1和Q3 4与Q2之间的不整合。研究区最小构造缩短量为486 km,缩短率为481％。     

黄陵背斜的构造几何形态及其成因探讨

黄陵背斜位于扬子克拉通的东缘,其核部出露的崆岭群被认为是扬子克拉通的基底岩石,并成为华南地质学研究的热点地区。从区域上看,黄陵背斜紧邻江汉盆地,东西两侧分别是荆当盆地与秭归盆地,黄陵背斜和周缘盆地构成明显的隆起—坳陷相互对应的构造。详细的野外观察和构造几何学的剖析表明,黄陵背斜的两翼西陡东缓,构成不对称背形的穹隆构造。在穹隆形成过程中,相应的岩石变形以顺层滑脱及相关的褶皱和小规模的逆冲断层为主,在早三叠世薄层灰岩、志留纪龙马溪组页岩、奥陶纪灰岩、寒武纪炭质灰岩以及震旦纪陡山沱组薄层灰岩广泛发育,并具有垂向缩短的重力滑脱特点,构造叠加关系指示了其形成于晚侏罗—早白垩纪之间。在构造变形分析的基础上,并深入探讨了黄陵背斜成因的3种可能的动力学背景。     

高分五号全谱段光谱成像仪地表温度与发射率反演

地表温度在全球能量平衡和气候变化研究中具有重要意义。中国新一代高分辨率卫星高分五号卫星(GF-5)搭载的全谱段成像光谱仪有4个40 m空间分辨率的热红外波段,可以提供高空间分辨率的地表温度信息。本文提出了适用于全谱段成像光谱仪的温度与发射率分离TES(Temperature and Emissivity Separation)算法同时反演地表温度和发射率,为了提高大气校正精度,算法加入了水汽缩放WVS(Water Vapor Scaling)大气校正方法。首先利用Seebor V5.0全球大气廓线库构建模拟数据对算法精度进行了评价;然后利用张掖地区11景ASTER影像作为替代数据和同步的地面实测数据对算法精度进行了验证。模拟数据结果表明加入WVS方法后TES算法反演地表温度的RMSE由2.59 K降低到1.54 K,4个波段地表发射率的RMSE分别从0.122、0.12、0.102和0.037降低到0.042、0.04、0.028和0.026;地表验证结果表明本文算法反演的地表温度与站点实测值具有更好的一致性,平均Bias由1.08 K降低到0.47 K,RMSE由2.17 K降低到1.7 K;反演的各波段地表发射率与地面实测结果误差均小于1%。因此,本文提出的温度与发射率分离算法具有较高精度,可以利用GF-5数据获取高精度高空间分辨率的地表温度和发射率数据,服务于其他相关研究。     

Seismic fracture evaluation of diaphragm joints in welded beam-to-box column moment connections

Steel box columns are widely used in steel building structures in Taiwan due to their dual strong axes. To transfer the beam-end moment to the column, diaphragm plates of the same thickness and elevations as the beam flanges are usually welded inside the box column. The electro-slag welding (ESW) process is widely used to connect the diaphragms to the column flanges in Taiwan because of its convenience and efficiency. However, ESW may increase the hardness of the welds and heat-affected zones (HAZs), while reducing the Charpy-V notch strength in the HAZ. This situation can cause premature fracture of the diaphragm-to-column flange welds before a large plastic rotation is developed in the beam-to-box column joints. To quantify the critical eccentricity and the effectiveness of fracture prediction, this study uses fracture prediction models and finite element model (FEM) analysis to correlate the test results. In this study, two beam-to-box column connection subassembly tests are conducted with different loading protocols and ESW chamber shapes. To implement a fracture prediction model, the material parameters are established from circumferential notched tensile tests and FEM analysis. Test results indicate that the fracture instances can be predicted on the basis of the cumulative plastic deformation in the HAZs. Analytical results indicate that fracture instances and locations are sensitive to the relative locations of the ESW joints and beam flange. Tests also confirm that the possible fracture of the diaphragm-to-column flange joints can be mitigated by enlarging the chamber of the ESW joint.     

Parameterization of meridional energy flux in a one-dimensional climate model

Summary The zonally averaged meridional energy transport is parameterized in terms of the zonally averaged temperature gradient and its radiative equilibrium value. Two climate regimes are identified: radiative equilibrium and isothermal climates. The transport and temperature gradient are intermediate between corresponding quantities of these two climates. The parameterization assumes a linear increase of transport as temperature gradient departs from its radiative equilibrium value. The parameterization is formulated using a one-dimensional climate model. Ice-albedo feedback provides the mechanism for climate changes. The parameterization works well for climates associated with seasonal changes.

---

Parameterisierung des meridionalen Energiestromes in einem eindimensionalen Klimamodell

Zusammenfassung Der zonal gemittelte, meridionale Energietransport wird in Abhängigkeit vom zonal gemittelten Temperaturgradienten und seinem Strahlungsgleichgewicht parameterisiert. Zwei Klimaregime können identifiziert werden: Strahlungsgleichgewicht und isothermes Klima. Der Transport und der Temperaturgradient befinden sich zwischen den korrespondierenden Werten dieser zwei Klimate. Die Parameterisierung nimmt eine lineare Zunahme des Transportes mit der Abweichung des Temperaturgradienten vom seinem Strahlungsgleichgewichtswert an. Die Parameterisierung wird unter Verwendung eines eindimensionalen Klimamodelles formuliert. Die Eis-Albedo-Rückkopplung liefert den Mechanismus für Klimadnderungen. Die Parameterisierung funktioniert gut fur Klimate, welche jahreszeitliche Anderungen beinhalten.

---

---

With 4 Figures     

利用臭氧氧化实现复合生物反应器污泥减量

采用复合生物反应器,对应用臭氧氧化实现污泥减量进行了研究。2个相同的复合生物反应器平行运行,1个作为对照系统,1个作为氧化系统。反应器内装有半软性填料,投加量为10%。曝气池中悬浮污泥浓度为1 500 mg/L左右,生物膜浓度为2 000 mg/L左右。试验结果表明,随着臭氧氧化污泥比例的增加,污泥表观产率系数也随之降低,当臭氧投量为0.05 g O3/gSS,每天氧化的污泥分别为反应器内污泥的10%,20%,30%时,污泥表观产率系数分别减少28.2%,44.9%,75.8%。虽然随着污泥氧化比例的增大,氧化系统出水CODcr略有增加,但氧化系统仍能保持其生物处理能力,CODcr去除率在92%以上;2个系统之间氨氮的去除率相差不大,氧化系统的硝化能力基本没有受到臭氧氧化的影响。     

胶东金矿集区硫和碳的循环与控矿作用

胶东金矿集区矿石中普遍含金属硫化物和碳酸盐矿物,某些矿床中还见有富含炭质的断裂破碎带.成矿溶液中含有大量的SO4^2-、HCO3^-、CO2和有机质等的含硫和含碳组分.矿石硫同位素组成明显富集重硫,结合胶东金矿主要成矿时期（早白垩世）特殊的地质背景、同期海水硫酸盐δ^34S平均值（约＋16‰）及现代海水沿NE-NNE向断裂倒灌情况,笔者认为,硫的主要来源与海水硫的大量补给有关.而根据碳、氧同位素组成特征分析,形成金矿床中方解石的物源有很大一部分来自前寒武系碳酸盐岩.浅表环境下成矿金属元素及硫、碳等物质在热液对流系统中的大规模循环是成矿的关键,SO4^2-与S2^-之间的临界转化是制约成矿金属元素活化-迁移-聚集的重要因素,而含碳组分（CO3^2-、HCO3^-、CO2和有机质）则有利于Au、Cu、Pb、Zn等元素的活化和迁移,含硫和含碳组分的循环及有关的物理化学反应之间有明显的关联性.