The influence of the gulf’s geometry on seiche oscillations in an enclosed basin

The finite-elements technique is applied to study the effect of a basin’s geometry (bays, harbours) and location of the characteristics of seiche oscillations in the basin and in the gulf proper. An increase of the length of the bay is shown to contribute to the periods of natural oscillations and to cause their restructuring. Translated by Vladimir A. Puchkin.     

Action mechanism of geotextile-reinforced cushion under breakwater on soft ground

Various measures including material experiments, centrifuge modeling tests and FEM numerical analyses were performed to study systematically the action mechanism of the geotextile-reinforced cushion under breakwater on soft ground and the effects of the strata characterization and the reinforcement condition on the stability of the breakwater-ground system. In the aspect of controlling the deformation, the geotextile-reinforced cushion under breakwater constrains the lateral displacement of both the embankment and the ground. From the viewpoint of stress, the reinforcement suppressed the range of high stress level in the system. In general, the weaker the ground is and the greater the modulus of the geotextile is, the more effective the reinforcement is. The tensile force in the geotextile is greater in the range of the main part of the embankment.     

涠洲岛珊瑚礁生态系中浮游动植物与环境因子关系的初步探讨

本文根据1990年4月、10月间的理化分析数据，结合2002年9月涠洲岛珊瑚礁生态环境的调查状况，首次从珊瑚礁生态系的角度初步探讨该岛区浮游动植物与环境因子的关系。结果表明：该岛区浮游动植物的分布具有明显的区域性和季节性，既体现了珊瑚礁生态系具有较高的初级生产力特征，也体现了浮游动植物具有显著的季节交替现象。相关分析显示，水温、盐度、N，P，Si营养盐对浮游植物的种类组成及数量变动均有明显影响，但对浮游动物的影响不大；N是该生态系中浮游植物的限制因子，P限制状况只有在珊瑚礁生长带较深的海域出现，Si呈相对富足状态。     

Investigation on the Deposition in an Excavated Trough at the East Shore of Jiaozhou Bay, China

- Based on field investigations, this paper analyzes three types of harbour basinns and navigation channel excavated on seabed in Jiaozhou Bay, get a general rule of deposition for excavated trough, it found that pollution is one of crucial factors resulting in the deposition of the excavated trough in the east shore of Jiaozhou Bay. With these results, it predicted the annual deposition thickness for the excavated trough and disclosed the fact that it can't be deposited deadly during one storm. At the same time, with two-dimensional numerical model, it studied the effects of the excavated trough and the reclamation near shore on tidal cureent and said that the excavated trough can decrease the current velocity passing through the trough about 10- 15%, but only limited inside and near the trough and there are no effect on other regions; reclamation can cut off the pollution sources and no obvious effect on the currents of the Jiaozhou Bay. Connecting the deep trough and Cangkou tidal channel with a new     

赤道西太平洋大气边界层的诊断分析

利用１９９３年ＥＮＳＯ事件爆发（４月）前酝酿时期“热带大洋与全球大气－海洋耦合响应试验”强化观测阶段“向阳红五号”科学考察船１５５°Ｅ，２°Ｓ定点海洋气象和高空大气探测资料，分析了赤道西太平洋大气边界层特征。结果表明：赤道西太平洋上空辐合对流区边界层内也有等温或逆温层存在，大气边界层物理参数变化与大尺度海－气变异有密切关系，赤道太平洋沃克环流加强、东移，边界层上部逆温层出现概率明显增大，边界层内高湿层湿度减小。另外，边界层内实测风速、风向廓线随高度的变化基本上不服从Ｅｋｍａｎ规律，但由其平均，分量合成得到的平均风随高度的变化却基本符合Ｅｋｍａｎ规律。     

Study on “J”Type Offshore Pipeline-Laying Method

-Considering both the seabed foundation and wave, an analytic model of "J" type is proposed for offshore pipeline-laying. The governing differential equation is also obtained for the pipeline on the seabed and for the suspension sections. By utilizing weighted- residual method and dual iteration technique, an approximate solution is obtained, too. In the end, calculation examples are given for analyzing the changeable relationship among the major parameters.     

模型沙干重度的变化规律及其在泥沙模型试验中的作用

模型沙干重度在动床模型试验中是影响起动流速比尺和冲淤时间比尺的重要参数，其随淤积历时、粒径变化、埋置深浅和加工方法的不同有着不同的变化规律。通过试验，结合已有的成果，对模型沙干重度受以上几种因素的影响进行了研究，并进一步分析了其变化规律在动床模型试验中的作用。     

硫酸皮肤素寡糖的分离与制备

利用软骨素酶 ABC (Chondroitinase ABC,EC4 .2 .2 .4 )对硫酸皮肤素 (Dermatan Sul-fate,DS)进行控制降解。对得到的混合寡糖首先采用低压凝胶渗透色谱 (L PGPC)进行分级 ,然后对每一组分再利用强阴离子交换高压液相色谱 (SAX- HPL C)进行分离 ,最终制备出聚合度为 2 ,4 ,6 ,8,10 ,12的寡糖纯品。寡糖纯度采用 SAX- HPL C,毛细管电泳 (CE)以及聚丙烯酰胺凝胶电泳(PAGE)进行检验 ,结构采用电喷雾离子化质谱 (ESI- MS)以及核磁共振波谱 (NMR)技术确定     

我国海水制盐工艺改革的设计研究

从技术上和工艺上的可能性、可行性和合理性，论证了海水制盐工艺改革的必要性，并且提出了实现海水制盐工艺改革的各种设计方案。它对我国的海水制盐工业的发展将具有深远意义。     

Optimum design of filament-wound multilayer-sandwich submersible pressure hulls

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.