动力定位系统发展状况及研究方法

动力定位系统（Dynamic Positioning System)是一种闭环的控制系统，其采用推力器来提供抵抗风、浪、流等作用在船上的环境力，从而使船尽可能地保持在海平面上要求的位置上，其定位成本不会随着水深增加而增加，并且操作也比较方便。本文对动力定位系统发展及各组成部分进行了介绍，以期对动力定位系统有个比较完整的认识。     

灰色关联分析法在海洋环境质量评价中的应用

介绍了灰色关联分析法的原理,说明了其评价步骤。以青岛某海区海水水质评价为例阐明了该方法在海洋环境评价中的应用,并将评价结果与模糊综合评价结果加以比较,结果表明,两种评价方法的评价结果有着较明显的差别,分析了原因。本文还提出了海水污染防治措施,为海洋环境保护提供依据。     

吉林省伊通县疙瘩屯麦饭石矿产评价

麦饭石能在水中溶出多种对人体有益的微量元素,在日益崇尚天然、环保和健康的今天,开发利用麦饭石资源仍有重要意义。伊通县爱民乡疙瘩屯麦饭石资源丰富且品质优异,具有良好的开发价值。     

MAPGIS投影变换子系统的应用

介绍了利用MAPGIS投影变换子系统对地质勘查成果图件进行投影转换的方法步骤,同时用实例说明了不同坐标系之间投影转换过程中的参数选择,对计算机制图具有一定的借鉴作用。     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

辽宁东五家子金矿矿脉含矿性评价标志研究

辽宁东五家子金矿的矿脉由蚀变岩和石英脉透镜体构成,可采矿体均为硫化物石英脉型.工业矿脉中,石英为烟灰色,发育他形、半自形的细粒黄铁矿等硫化物,有较大规模的矿体.矿化脉中,石英为乳白色,发育粗粒、自形的浅色黄铁矿,无可采矿体.在工业矿脉、次要矿脉、矿化脉的蚀变岩和石英脉样品中,Au,Hg与其他元素的相关性有明显区别.用石英脉样品的As-Ni-Ba图解和蚀变岩样品的Au-Ag-Ba图解预测,矿区外围的西沟1号脉和西沟3号脉属于工业矿脉.     

Benthic nutrient fluxes in the intertidal flat within the Changjiang （Yangtze River） Estuary

In an annual cycle from March 2005 to February 2006, benthic nutrient fluxes were measured monthly in the Dongtan intertidal flat within the Changjiang （Yangtze River） Estuary. Except for NH4^＋, there always showed high fluxes from overlying water into sediment for other four nutrients. Sediments in the high and middle marshes, covered with halophyte and consisting of macrofauna, demonstrated more capabilities of assimilating nutrients from overlying water than the low marsh. Sampling seasons and nutrient concentrations in the overlying water could both exert significant effects on these fluxes. Additionally, according to the model provided by previous study, denitrification rates, that utilizing NO3- transported from overlying water （Dw） in Dongtan sediments, were estimated to be from -16 to 193 μmol·h^-1·m^-2 with an average value of 63 μmol·h^-1·m^-2 （n=18）. These estimated values are still underestimates of the in-situ rates owing to the lack of consideration of DN, i.e., denitrification supported by the local NO3^- production via nitrification.     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.     

基于转换图谱算法的地面坡度统计误差校正研究

以济南市南部山区为试验区,探讨在ArcGIS中进行DEM总体精度计算的方法,并分析不同比例尺DEM对地面坡度分级统计的影响。为有效校正地面坡度分级统计的误差,构建高精度的1∶2 000地面坡度与1∶1万地面坡度的"地面坡度转换图谱"。在此基础上根据回归统计得出各级别对应的二次拟合曲线,校正能够大幅度提高地面坡度统计的精度。     

地震瞬时属性分析技术在岩溶勘查中的应用

介绍地震瞬时属性分析技术的原理及处理方法,分别对岩溶在地震剖面、瞬时振幅剖面、瞬时频率剖面、瞬时相位剖面上的表现特征作了说明.并结合实际资料进行多参数解释,进而确定地下岩溶的发育情况、分布范围和规模,同时对异常进行钻井验证,结果表明,地震瞬时属性分析技术比常规地震处理方法能更好地排除干扰,确定岩溶异常.