Development of an empirical model for rainfall-induced hillside vulnerability assessment: a case study on Chen-Yu-Lan watershed,Nantou, Taiwan

In Taiwan, the hillside is about 70 % of total area. These areas also have steep topography and geological vulnerability. When an event of torrential rain comes during a typhoon, the landslide disasters usually occur at these areas due to the long duration and high intensity of rainfall. Therefore, a design which considers the potential landslide has become an important issue in Taiwan. In this study, a temporal characteristic of landslide fragility curve (LFC) was developed, based on the geomorphological and vegetation factors using landslides at the Chen-Yu-Lan watershed in Taiwan, during Typhoon Sinlaku (September 2008) and Typhoon Morakot (August 2009). This study addressed an effective landslide hazard assessment process, linking together the post-landslide damage and post-rainfall data for LFC model. The Kriging method was used to interpolate the rainfall indices (R ₀, R, I) for numerical analysis. Remote sensing data from SPOT images were applied to analyze the landslide ratio and vegetation conditions. The 40-m digital elevation model was used for slope variation analysis in the watershed, and the maximum likelihood estimate was conducted to determine the mean and standard deviation parameters of the proposed empirical LFC model. This empirical model can express the probability of exceeding a damage state for a certain classification (or conditions) of landslides by considering a specific hazard index for a given event. Finally, the vulnerability functions can be used to assess the loss from landslides, and, in the future, to manage the risk of debris flow in the watershed.     

Microvariability of line profiles in the spectrum of the star ι Her

We present the results of a search for and analysis of line-profile variations in the spectrum of the star ι Her. The observations were acquired with the 1.8 m telescope of the Bohyunsan Optical Astronomy Observatory (Republic of Korea) in May–June 2004. We obtained 69 spectra of the star with signal-to-noise ratios ≈300 and a time resolution of 5–7 min. Profile variability was revealed for six lines of HI, HeI, and SiIII, in the central parts of the lines. The variability amplitude is ≈(1–2)% in units of the intensity of the adjacent continuum. Evidence was found for cyclic variations of the lines, with periods from ≈7^h to ≈2.9^d. We conclude that ι Her belongs to the group of slowly pulsating stars.     

Effects of biochar, cow bone, and eggshell on Pb availability to maize in contaminated soil irrigated with saline water

Toxicity of heavy metals adversely affects environment and human health. Organic materials derived from natural matters or wastes have been applied to soils to reduce the mobility of contaminants such as heavy metals. However, the application of cow bone powder (CB), biochar (BC), and eggshell powder (ES) is rarely investigated for the reduction of Pb bioavailability in soils irrigated with saline water. The objective of this study was to assess the effectiveness of CB, BC, and ES additions as immobilizing substances on Pb bioavailability in shooting range soil irrigated with deionized and saline water. Each additive of CB, BC, and ES at 5 % (w/w) was mixed with soils and then the deionized and saline water were irrigated for 21 days. With deionized water irrigation, the soils treated with CB, BC, and ES exhibited higher pH when compared with saline water irrigation. With saline water irrigation, the electrical conductivity, water-soluble anions, and cations were significantly increased in soils treated with CB, BC, and ES. The water-soluble Pb in soils treated with CB, BC, and ES was significantly decreased with saline water irrigation. On the other hand, the water-soluble Pb in soil treated with CB was increased with deionized water irrigation. Only BC with saline water irrigation decreased the Pb concentration in maize shoots.     

Delineation of landslide hazard areas on Penang Island, Malaysia, by using frequency ratio, logistic regression, and artificial neural network models

This paper summarizes findings of landslide hazard analysis on Penang Island, Malaysia, using frequency ratio, logistic regression, and artificial neural network models with the aid of GIS tools and remote sensing data. Landslide locations were identified and an inventory map was constructed by trained geomorphologists using photo-interpretation from archived aerial photographs supported by field surveys. A SPOT 5 satellite pan sharpened image acquired in January 2005 was used for land-cover classification supported by a topographic map. The above digitally processed images were subsequently combined in a GIS with ancillary data, for example topographical (slope, aspect, curvature, drainage), geological (litho types and lineaments), soil types, and normalized difference vegetation index (NDVI) data, and used to construct a spatial database using GIS and image processing. Three landslide hazard maps were constructed on the basis of landslide inventories and thematic layers, using frequency ratio, logistic regression, and artificial neural network models. Further, each thematic layer’s weight was determined by the back-propagation training method and landslide hazard indices were calculated using the trained back-propagation weights. The results of the analysis were verified and compared using the landslide location data and the accuracy observed was 86.41, 89.59, and 83.55% for frequency ratio, logistic regression, and artificial neural network models, respectively. On the basis of the higher percentages of landslide bodies predicted in very highly hazardous and highly hazardous zones, the results obtained by use of the logistic regression model were slightly more accurate than those from the other models used for landslide hazard analysis. The results from the neural network model suggest the effect of topographic slope is the highest and most important factor with weightage value (1.0), which is more than twice that of the other factors, followed by the NDVI (0.52), and then precipitation (0.42). Further, the results revealed that distance from lineament has the lowest weightage, with a value of 0. This shows that in the study area, fault lines and structural features do not contribute much to landslide triggering.     

Geochronology and geochemistry of eclogites from the Mariánské Lázně Complex,Czech Republic: Implications for Variscan orogenesis

The Mariánské Lázn complex (MLC) is located in the Bohemian Massif along the north-western margin of the Teplá-Barrandian microplate and consists of metagabbro, amphibolite and eclogite, with subordinate amounts of serpentinite, felsic gneiss and calcsilicate rocks. The MLC is interpreted as a metaophiolite complex that marks the suture zone between the Saxothuringian rocks to the north-west and the Teplá-Barrandian microplate to the south-east. Sm-Nd geochronology of garnet-omphacite pairs from two eclogite samples yields ages of 377±7, and 367±4 Ma. Samples of eclogite and amphibolite do not define a whole rock Sm-Nd isochron, even though there is a large range in Sm/Nd ratio, implying that the suite of samples may not be cogenetic. Eclogites do not have correlated _Nd values and initial ⁸⁷Sr/⁸⁶Sr ratios. Five of the eight eclogite samples have high _Nd values (+10.2 to +7.1) consistent with derivation from a MORB-like source, but variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7059) which probably reflect hydrothermal seawater alteration. Three other eclogite samples have lower _Nd values (+ 5.4 to –0.8) and widely variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7096). Such low _Nd values are inconsistent with derivation from a MORB, source and may reflect a subduction or oceanic island basalt component in their source. The MLC is an important petrotectonic element in the Bohemian Massif, providing evidence for Cambro-Ordovician formation of oceanic crust and interaction with seawater, Late Devonian (Frasnian-Famennian) high- and medium-pressure metamorphism related to closure of a Saxothuringian ocean basin, Early Carboniferous (Viséan) thrusting of the Teplá terrane over Saxothuringian rocks and Late Viséan extension.     

Determination and application of the weights for landslide susceptibility mapping using an artificial neural network

The purpose of this study is the development, application, and assessment of probability and artificial neural network methods for assessing landslide susceptibility in a chosen study area. As the basic analysis tool, a Geographic Information System (GIS) was used for spatial data management and manipulation. Landslide locations and landslide-related factors such as slope, curvature, soil texture, soil drainage, effective thickness, wood type, and wood diameter were used for analyzing landslide susceptibility. A probability method was used for calculating the rating of the relative importance of each factor class to landslide occurrence. For calculating the weight of the relative importance of each factor to landslide occurrence, an artificial neural network method was developed. Using these methods, the landslide susceptibility index (LSI) was calculated using the rating and weight, and a landslide susceptibility map was produced using the index. The results of the landslide susceptibility analysis, with and without weights, were confirmed from comparison with the landslide location data. The comparison result with weighting was better than the results without weighting. The calculated weight and rating can be used to landslide susceptibility mapping.     

Accurate measurement of silver isotopic compositions in geological materials including low Pd/Ag meteorites

Very precise silver (Ag) isotopic compositions have been determined for a number of terrestrial rocks, and high and low Pd/Ag meteorites by utilizing multicollector inductively coupled plasma mass spectrometry (MC-ICPMS). The meteorites include primitive chondrites, the Group IAB iron meteorites Canyon Diablo and Toluca, and the Group IIIAB iron meteorite Grant. Silver isotopic measurements are primarily of interest because ¹⁰⁷Ag was produced by decay of the short-lived radionuclide ¹⁰⁷Pd during the formation of the solar system and hence the Pd-Ag chronometer has set constraints on the timing of early planetesimal formation. A 2σ precision of ±0.05‰ can be obtained for analyses of standard solutions when Ag isotopic ratios are normalized to Pd, to correct for instrumental mass discrimination, and to bracketing standards. Caution must be exercised when making Ag isotopic measurements because isotopic artifacts can be generated in the laboratory and during mass spectrometry. The external reproducibility for geological samples based on replicate analyses of rocks is ±0.2‰ (2σ).All chondrites analyzed have similar Ag isotopic compositions that do not differ significantly (>0.3‰) from the ‘terrestrial’ value of the NIST SRM 978a Ag isotope standard. Hence, they show no evidence of excess ¹⁰⁷Ag derived from ¹⁰⁷Pd decay or, of stable Ag isotope fractionation associated with volatile element depletion within the accretion disk or from parent body metamorphism. The Group IAB iron meteorite samples analyzed show evidence of complex behavior and disturbance of Ag isotope systematics. Therefore, care must be taken when using this group of iron meteorites to obtain chronological information based on the Pd-Ag decay scheme.     

Simultaneous stabilization of arsenic, lead, and copper in contaminated soil using mixed waste resources

In the present study, stabilization treatment using waste resource stabilizers was performed for soil contaminated with As and heavy metals (Pb and Cu). Calcined oyster shell (COS) and coal mine drainage sludge (CMDS) were used as a mixed stabilizing agent for a wet-curing duration of 28 days. After the stabilization treatment, the treatment process efficiency was evaluated by the results of various batch- and column-leaching tests. Neutral and weak acid extraction methods, such as water-soluble extraction and SPLP, did not exhibit satisfactory results for heavy metal stabilization, even if they showed very low leachability. On the other hand, TCLP and 0.1 M HCl extraction showed that the stabilizers significantly reduced the amount of heavy metals leached from the soil, which strongly supports the thesis that the stabilization treatment is efficient in the acidic leaching conditions that were explored. Specifically, in the 0.1 M HCl extraction, the reduction efficiencies of As, Pb, and Cu leachings were more than 90 %, compared with control experiments. This study demonstrates that the application of waste resources for the stabilization of As and heavy metals is feasible. However, some limitations observed in the experiments should be considered in future studies, such as the mobilization of alkali-soluble elements, and in particular, exchangeable fractions of Cu. In addition, the treatment efficiency can be evaluated by different leaching methods, which suggests that multidirectional approaches are required for the proper evaluation of stabilization treatment.     

Improved barometric and loading efficiency estimates using packers in monitoring wells

Measurement of barometric efficiency (BE) from open monitoring wells or loading efficiency (LE) from formation pore pressures provides valuable information about the hydraulic properties and confinement of a formation. Drained compressibility (α) can be calculated from LE (or BE) in confined and semi-confined formations and used to calculate specific storage (S _s). S _s and α are important for predicting the effects of groundwater extraction and therefore for sustainable extraction management. However, in low hydraulic conductivity (K) formations or large diameter monitoring wells, time lags caused by well storage may be so long that BE cannot be properly assessed in open monitoring wells in confined or unconfined settings. This study demonstrates the use of packers to reduce monitoring-well time lags and enable reliable assessments of LE. In one example from a confined, high-K formation, estimates of BE in the open monitoring well were in good agreement with shut-in LE estimates. In a second example, from a low-K confining clay layer, BE could not be adequately assessed in the open monitoring well due to time lag. Sealing the monitoring well with a packer reduced the time lag sufficiently that a reliable assessment of LE could be made from a 24-day monitoring period. The shut-in response confirmed confined conditions at the well screen and provided confidence in the assessment of hydraulic parameters. A short (time-lag-dependent) period of high-frequency shut-in monitoring can therefore enhance understanding of hydrogeological systems and potentially provide hydraulic parameters to improve conceptual/numerical groundwater models.     

An extensive erosion surface of a strongly deformed limestone bed in the Gushan and Chaomidian formations (late Middle Cambrian to Furongian), Shandong Province,China: Sequence–stratigraphic implications

In order to understand sequence development and sea-level fluctuations during the late Middle Cambrian to early Furongian on the North China epeiric platform, the present study focuses on a unique, subtle erosion surface of an extensive (approx. 100 km), strongly deformed limestone bed in the uppermost part of the Gushan Formation, Shandong Province, China. The Gushan Formation and the overlying Chaomidian Formation consist mainly of shales and a variety of carbonates that were deposited in subtidal environments (e.g., deep subtidal, shallow subtidal, shoreface/shoal, subtidal microbial flat, and restricted platform interior). Three third-order depositional sequences (S1–3) are identified, each of which comprises a thin transgressive systems tract (TST) and a relatively thick highstand systems tract (HST). Each sequence is bounded by a drowning unconformity (SB1), a subaerial unconformity (SB2), or a surface of submarine erosion (SB3). The upper sequence boundary (SB2) of sequence 1 (S1) is represented by a subtle erosion surface of an extensive, deformed limestone bed with a wide variety of soft-sediment deformation structures (e.g., lime mudstone breccias, chaotic wacke-packstone laminae and fragments, homogenized oolites, and clastic dykes), and is overlain by small sporadic microbial buildups and an extensive bioclastic grainstone bed. The deformed limestone was formed during early diagenesis by differential deformation processes (brecciation, liquefaction/fluidization, and injection) which were most likely induced by pore-water overpressure during the period of rapid sea-level fall. Despite the lack of subaerial exposure features (e.g., paleokarst, paleosol, etc.), the characteristics of the erosion surface (cutting well-lithified sediment below), the missing of a significant geological record (the Prochuangia biozone), and the worldwide correlatable positive carbon isotope excursion collectively indicate that the erosion surface developed under conditions of subaerial exposure after contemporaneous marine cementation of the deformed sediment. The missing of the Prochuangia biozone is most likely due to non-deposition at a subaerial hiatal surface. The erosion surface was submerged as a result of subsequent rise in sea level, where sporadic microbial buildups formed under suitable conditions. Freshly deposited, winnowed, shell-dominated transgressive lag deposits (containing Chuangia trilobite fragments, brachiopod shells, and abundant glauconite grains) formed with continued rise in sea level, which became, in turn, overlain by shale-dominated facies. The unique combination of the subtle erosion surface (sensu stricto a subaerial unconformity) and the underlying deformed limestone bed provides an important criterion for recognizing the subtle changes in relative sea level on shallow epeiric platforms.