GETEMME—a mission to explore the Martian satellites and the fundamentals of solar system physics

GETEMME (Gravity, Einstein??s Theory, and Exploration of the Martian Moons?? Environment), a mission which is being proposed in ESA??s Cosmic Vision program, shall be launched for Mars on a Soyuz Fregat in 2020. The spacecraft will initially rendezvous with Phobos and Deimos in order to carry out a comprehensive mapping and characterization of the two satellites and to deploy passive Laser retro-reflectors on their surfaces. In the second stage of the mission, the spacecraft will be transferred into a lower 1500-km Mars orbit, to carry out routine Laser range measurements to the reflectors on Phobos and Deimos. Also, asynchronous two-way Laser ranging measurements between the spacecraft and stations of the ILRS (International Laser Ranging Service) on Earth are foreseen. An onboard accelerometer will ensure a high accuracy for the spacecraft orbit determination. The inversion of all range and accelerometer data will allow us to determine or improve dramatically on a host of dynamic parameters of the Martian satellite system. From the complex motion and rotation of Phobos and Deimos we will obtain clues on internal structures and the origins of the satellites. Also, crucial data on the time-varying gravity field of Mars related to climate variation and internal structure will be obtained. Ranging measurements will also be essential to improve on several parameters in fundamental physics, such as the Post-Newtonian parameter ?? as well as time-rate changes of the gravitational constant and the Lense-Thirring effect. Measurements by GETEMME will firmly embed Mars and its satellites into the Solar System reference frame.     

Molecular study of insoluble organic matter in Kainsaz CO3 carbonaceous chondrite: Comparison with CI and CM IOM

Abstract— Kainsaz CO3 insoluble organic matter (IOM) was studied using Curie point pyrolysis, electronic paramagnetic resonance (EPR), and high‐resolution transmission electron microscopy (HRTEM) to determine the effect of thermal metamorphism on molecular chondritic fingerprints. Pyrolysis released a very low amount of products that consist of one‐ and two‐ring aromatic units with methyl, dimethyl, and ethyl substituents. Moreover, Kainsaz IOM contains two orders of magnitude fewer radicals than Orgueil, Murchison, and Tagish Lake IOM. In addition, no diradicaloids were found in Kainsaz, although they are thought to constitute a specific signature for weakly organized extraterrestrial organic compounds in contrast to terrestrial ones. HRTEM reveals a very heterogeneous structure, with microporous disordered carbon, mesoporous graphitic carbons and graphite. Graphitization likely occurs and explains the differences between Kainsaz and CI or CM IOM. Heating stress experienced by Kainsaz IOM, on the parent body and/or prior its accretion, is likely responsible for the differences in molecular and structural organizations compared with those of CI and CM IOM.     

Interplay of S and As in Mekong Delta sediments during redox oscillations

The cumulative effects of periodic redox cycling on the mobility of As,Fe,and S from alluvial sediment to groundwater were investigated in bioreactor experiments.Two particular sediments from the alluvial floodplain of the Mekong Delta River were investigated:Matrix A(14 m deep)had a higher pyrite concentration than matrix B(7 m deep)sediments.Gypsum was present in matrix B but absent in matrix A.In the reactors,the sediment suspensions were supplemented with As(Ⅲ)and SO_4~(2-),and were subjected to three full-redox cycles entailing phases of nitrogen/CO_2,compressed air sparging,and cellobiose addition.Major differences in As concentration and speciation were observed upon redox cycling.Evidences support the fact that initial sediment composition is the main factor controlling arsenic release and its speciation during the redox cycles.Indeed,a high pyrite content associated with a low SO_4~(2-)content resulted in an increase in dissolved As concentrations,mainly in the form of As(Ⅲ),after anoxic half-cycles;whereas a decrease in As concentrations mainly in the form of As(Ⅴ),was instead observed after oxic half-cycles.In addition,oxic conditions were found to be responsible for pyrite and arsenian pyrite oxidation,increasing the As pool available for mobilization.The same processes seem to occur in sediment with the presence of gypsum,but,in this case,dissolved As were sequestered by biotic or abiotic redox reactions occurring in the Fe—S system,and by specific physico-chemical condition(e.g.pH).The contrasting results obtained for two sediments sampled from the same core show that many complexes and entangled factors are at work,and further refinement is needed to explain the spatial and temporal variability of As release to groundwater of the Mekong River Delta(Vietnam).     

Crack nucleation in saturated porous media

Crack nucleation has been the subject of important contributions in the last two last decades. However, it seems that few attention has been granted to the case of saturated porous media. This is the question addressed in the present paper which is devoted to nucleation in traction mode. From a physical point of view, nucleation is a sudden phenomenon, so that the material response is both adiabatic and undrained. In the spirit of the variational approach, the nucleated crack is viewed as the final state of a region of space in which the material undergoes a full damage process. In traction mode, the opening of a saturated crack in undrained condition induces a drop of fluid pressure. In case of low fluid compressibility, the presence of the fluid delays the brittle failure usually associated with nucleation, as long as the fluid pressure remains above the saturation vapor pressure. Nucleation is therefore possible only if a partial vaporization of the fluid takes place.     

The information system of the French Peatland Observation Service: Service National d'Observation Tourbières – A valuable tool to assess the impact of global changes on the hydrology and biogeochemistry of temperate peatlands through long term monitoring

Mitigating and adapting to global changes requires a better understanding of the response of the Biosphere to these environmental variations. Human disturbances and their effects act in the long term (decades to centuries) and consequently, a similar time frame is needed to fully understand the hydrological and biogeochemical functioning of a natural system. To this end, the ‘Centre National de la Recherche Scientifique’ (CNRS) promotes and certifies long-term monitoring tools called national observation services or ‘Service National d'Observation’ (SNO) in a large range of hydrological and biogeochemical systems (e.g., cryosphere, catchments, aquifers). The SNO investigating peatlands, the SNO ‘Tourbières’, was certified in 2011 ( https://www.sno-tourbieres.cnrs.fr/ ). Peatlands are mostly found in the high latitudes of the northern hemisphere and French peatlands are located in the southern part of this area. Thus, they are located in environmental conditions that will occur in northern peatlands in coming decades or centuries and can be considered as sentinels. The SNO Tourbières is composed of four peatlands: La Guette (lowland central France), Landemarais (lowland oceanic western France), Frasne (upland continental eastern France) and Bernadouze (upland southern France). Thirty target variables are monitored to study the hydrological and biogeochemical functioning of the sites. They are grouped into four datasets: hydrology, fluvial export of organic matter, greenhouse gas fluxes and meteorology/soil physics. The data from all sites follow a common processing chain from the sensors to the public repository. The raw data are stored on an FTP server. After operator or automatic processing, data are stored in a database, from which a web application extracts the data to make them available ( https://data-snot.cnrs.fr/data-access/ ). Each year at least, an archive of each dataset is stored in Zenodo, with a digital object identifier (DOI) attribution ( https://zenodo.org/communities/sno_tourbieres_data/ ).     

Magnitude of latent heat in thermally loaded clays

Temperature changes are known to induce specific couplings in clay, in particular, an anomalously high thermal pressurization in undrained conditions or a thermal compaction in drained conditions, both of which are potential threats for the mechanical stability and sealing capacity of the geomaterials. Thermodynamical analysis of those peculiar thermomechanical couplings points to a potentially important latent energy, which in turn could limit the temperature change upon heating or cooling. The direct measurement of latent energy developed during a laboratory geomechanical test is challenging. Instead, proper identification of thermal hardening in conventional experiments with temperature changes provides an alternative route to estimate latent energy. In this work, existing laboratory thermomechanical tests of clays are analyzed with a rigorous thermodynamic framework to quantify the magnitude of latent energy in thermomechanically loaded clays. A thermodynamically consistent constitutive model for fully saturated clays that combines two key features, (a) the temperature dependence of the blocked energy and (b) the framework of bounding plasticity, is proposed. The performance of the model is validated by reproducing results obtained in laboratory tests for Boom and Opalinus clays. The thermomechanical loads considered to validate the model performance were then used to estimate the percentage of work that remains latent in the clayey material during plastic yielding. We find that the magnitude of latent energy is quite significant, typically a few tens of percent of the total dissipated energy, and increases significantly with temperature. Accordingly, it is expected to play an important role in the thermomechanical response of clays.     

Catchment properties,function, and conceptual model representation: is there a correspondence?

This study investigates the possible correspondence between catchment structure, as represented by perceptual hydrological models developed from fieldwork investigations, and mathematical model structures, selected on the basis of reproducing observed catchment hydrographs. Three Luxembourgish headwater catchments are considered, where previous fieldwork suggested distinct flow‐generating mechanisms and hydrological dynamics. A set of lumped conceptual model structures are hypothesized and implemented using the SUPERFLEX framework. Following parameter calibration, the model performance is examined in terms of predictive accuracy, quantification of uncertainty, and the ability to reproduce the flow–duration curve signature. Our key research question is whether differences in the performance of the conceptual model structures can be interpreted based on the dominant catchment processes suggested from fieldwork investigations. For example, we propose that the permeable bedrock and the presence of multiple aquifers in the Huewelerbach catchment may explain the superior performance of model structures with storage elements connected in parallel. Conversely, model structures with serial connections perform better in the Weierbach and Wollefsbach catchments, which are characterized by impermeable bedrock and dominated by lateral flow. The presence of threshold dynamics in the Weierbach and Wollefsbach catchments may favour nonlinear models, while the smoother dynamics of the larger Huewelerbach catchment were suitably reproduced by linear models. It is also shown how hydrologically distinct processes can be effectively described by the same mathematical model components. Major research questions are reviewed, including the correspondence between hydrological processes at different levels of scale and how best to synthesize the experimentalist's and modeller's perspectives. Copyright © 2013 John Wiley & Sons, Ltd.     

Provenance discrimination of fine sediments by mid-infrared spectroscopy: Calibration and application to fluvial palaeo-environmental reconstruction

Determining sediment provenance allows a better understanding of fluvial palaeo-dynamics, and identifying involved watersheds, at broad spatio-temporal scales. Conventional approaches for source identification are usually based on the physical, mineralogical, geochemical, magnetic or isotopic properties of sediments. Rapid, non-destructive and, in well-established contexts, highly accurate, mid-infrared spectroscopy is an alternative method for investigating sediment sources. The present research objectives are: (i) to use the mid-infrared spectroscopy method to discriminate the provenance of fine sediments, by applying discriminant analysis on a large set of reference samples from three different watersheds in the Upper Rhine area (associated with the Rhine, Ill and Vosges tributaries); (ii) to clarify whether the provenance spectra signatures are influenced by riverine depositional contexts (bars versus banks) and, to some extent, by grain size and/or high organic matter content; and (iii) to apply the mid-infrared spectroscopy – discriminant analysis method to a study of fluvial palaeo-dynamics and determine the provenance of palaeo-channel infillings. Three main sedimentary sources, divided into eight sub-categories, have been characterized by 196 modern reference samples from 78 collecting sites. Discriminant analysis displayed a strong separating power by classifying correctly the origin of samples without any inter-group overlap, independently from the geomorphological context (bar or bank) and associated slight changes in organic matter contents or grain size. Mid-infrared spectroscopy – discriminant analysis investigations of the palaeo-channel infill, complemented by radiocarbon dates and mineralogical data, allowed reconstructing general trends for the local morpho-sedimentary dynamics over the last ca 12 millennia.     

Beerkan multi-runs for characterizing water infiltration and spatial variability of soil hydraulic properties across scales

A method is presented for characterizing the spatial variability of water infiltration and soil hydraulic properties at the transect and field scales. The method involves monitoring a set of 10 Beerkan runs distributed over a 1-m length of soil, and running BEST (Beerkan estimation of soil transfer parameters) methods to derive hydraulic parameters. The Beerkan multi-runs (BMR) method provides a significant amount of data at the transect scale, allowing the determination of correlations between water infiltration variables and hydraulic parameters, and the detection of specific runs affected by preferential flow or water repellence. The realization of several BMRs at several transects on the same site allows comparison of the variation between locations (spatial variability at the field scale) and at the transect scale (spatial variability at the metre scale), using analysis of variance. From the results, we determined the spatial variability of water infiltration and hydraulic parameters as well as its characteristic scale (transect versus field).     

Modeling flocculation in a hypertidal estuary

When fine particles are involved, cohesive properties of sediment can result in flocculation and significantly complicate sediment process studies. We combine data from field observations and state-of-the-art modeling to investigate and predict flocculation processes within a hypertidal estuary. The study site is the Welsh Channel located at the entrance of the Dee Estuary in Liverpool Bay. Field data consist of measurements from a fixed site deployment during 12–22 February 2008. Grain size, suspended sediment volume concentration, and current velocity were obtained hourly from moored instruments at 1.5 m above bed. Near-bottom water samples taken every hour from a research vessel are used to convert volume concentrations to mass concentrations for the moored measurements. We use the hydrodynamic model Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) coupled with the turbulence model General Ocean Turbulence Model (GOTM) and a sediment module to obtain three-dimensional distributions of suspended particulate matter (SPM). Flocculation is identified by changes in grain size. Small flocs were found during flood and ebb periods—and correlate with strong currents—due to breakup, while coarse flocs were present during slack waters because of aggregation. A fractal number of 2.4 is found for the study site. Turbulent stresses and particle settling velocities are estimated and are found to be related via an exponential function. The result is a simple semiempirical formulation for the fall velocity of the particles solely depending on turbulent stresses. The formula is implemented in the full three-dimensional model to represent changes in particle size due to flocculation processes. Predictions from the model are in agreement with observations for both settling velocity and SPM. The SPM fortnight variability was reproduced by the model and the concentration peaks are almost in phase with those from field data.