Observations of upwelling around the Izu Peninsula,Japan: May 1982

Hydrographic observations between the Izu Peninsula and Oshima Island, Japan, in May 1982, showed upwelling around the tip of the Peninsula and possibly also in the lee of Oshima Island. The upwelling introduced water as cold as 18 C with nitrate concentrations of 3M to the surface. Temperature/salinity analyses indicated that the upwelled water was of Kuroshio characteristics. Slightly fresher water was advected out of Sagami Bay in a coastal counter current.Contribution number 470 from the Shimoda Marine Research Center, University of Tsukuba.     

Enhanced Acoustic Backscatter Due to High Abundance of Sand Dollars, Dendraster excentricus

Detailed acoustic surveys of benthic sediments were conducted in July 1995 and September 1998 in the vicinity of Humboldt Bay, California. During these surveys, a band of enhanced acoustic backscatter was observed offshore from the bay entrance, approximately parallel to the isobaths, in water depths ranging from 16-24 m. In order to assess the cause of the increase in backscatter levels, a more comprehensive study was conducted in August and September 1999 using 100 kHz side-scan sonar, bottom grab sampling and underwater video recording. New observations indicated that a dense population of sand dollars ( Dendraster excentricus ) coincided with the enhanced backscatter band. Compared to the two previous acoustic studies, the central section of the band expanded westward by 180 m and the southern section of the band shifted eastward by 160 m, possibly resulting from a change in the biological or physical factors which influence the location and breadth of sand dollars. The relationship between high sand dollar abundance and enhanced acoustic backscatter was further verified in the nearshore region off Samoa Beach California, where a dense, banded population of sand dollars was previously observed. Video footage confirmed the presence of a band of sand dollars, also nominally parallel to the isobaths, in water depths of 8-15 m. A band of enhanced backscatter coincided with the dense sand dollar population. The identification of dense aggregations of sand dollars through enhanced acoustic backscatter could lead to the use of acoustic techniques to study sand dollar distributions and abundance.     

The morphology and tectonics of the Mark area from Sea Beam and Sea MARC I observations (Mid-Atlantic Ridge 23° N)

High-resolution Sea Beam bathymetry and Sea MARC I side scan sonar data have been obtained in the MARK area, a 100-km-long portion of the Mid-Atlantic Ridge rift valley south of the Kane Fracture Zone. These data reveal a surprisingly complex rift valley structure that is composed of two distinct spreading cells which overlap to create a small, zero-offset transform or discordant zone. The northern spreading cell consists of a magmatically robust, active ridge segment 40–50 km in length that extends from the eastern Kane ridge-transform intersection south to about 23°12′ N. The rift valley in this area is dominated by a large constructional volcanic ridge that creates 200–500 m of relief and is associated with high-temperature hydrothermal activity. The southern spreading cell is characterized by a NNE-trending band of small (50–200 m high), conical volcanos that are built upon relatively old, fissured and sediment-covered lavas, and which in some cases are themselves fissured and faulted. This cell appears to be in a predominantly extensional phase with only small, isolated eruptions. These two spreading cells overlap in an anomalous zone between 23°05′ N and 23°17′ N that lacks a well-developed rift valley or neovolcanic zone, and may represent a slow-spreading ridge analogue to the overlapping spreading centers found at the East Pacific Rise. Despite the complexity of the MARK area, volcanic and tectonic activity appears to be confined to the 10–17 km wide rift valley floor. Block faulting along near-vertical, small-offset normal faults, accompanied by minor amounts of back-tilting (generally less than 5°), begins within a few km of the ridge axis and is largely completed by the time the crust is transported up into the rift valley walls. Features that appear to be constructional volcanic ridges formed in the median valley are preserved largely intact in the rift mountains. Mass-wasting and gullying of scarp faces, and sedimentation which buries low-relief seafloor features, are the major geological processes occurring outside of the rift valley. The morphological and structural heterogeneity within the MARK rift valley and in the flanking rift mountains documented in this study are largely the product of two spreading cells that evolve independently to the interplay between extensional tectonism and episodic variations in magma production rates.     

Quantifying how climatic factors affect variation in plant disease severity: A general method using a new way to analyze meteorological data

A general method is presented for analyzing how climatic conditions affect plant disease severity. An example of its application is given for the analysis of stripe rust (caused by Puccinia striiformis) data on winter wheat cultivar Gaines and climatic data collected at Pullman, WA. for 1968–1986. A computer program WINDOW was written to identify the climatic factors most highly correlated with disease. This program is designed to utilize meteorological data for an entire growing season of a crop as well as to include climatic conditions preceding planting. This program uses an iterative process to examine variable-length segments of meteorological data in a more exhaustive analysis than previously possible. Climatic factors considered include: mean maximum, minimum, and average temperature; total and frequency of precipitation; consecutive days with and without precipitation; accumulation of negative and positive degree days; and number of days with extreme temperature events. Variables that were highly correlated with disease were the basis for regression models that were developed to predict disease severity index for each of the three cultivars. Two- and three-variable models explained, respectively, 75 and 76% of the variation in disease from year to year. Predictions (which could be made early enough in the growing season to allow application of chemical control) were evaluated on the basis of whether years with severe disease were accurately predicted. Models were validated using Allen's PRESS statistic and by application to new data. The method is potentially applicable to studies of how climatic conditions affect the populations or productivity of other types of organisms.This research was supported by a National Science Foundation Grant (ATM 85-03115), Climate Dynamics Program, Division of Atmospheric Sciences.     

Efficacy of Hollow‐Fiber Ultrafiltration for Microbial Sampling in Groundwater

The goal of this study was to test hollow‐fiber ultrafiltration as a method for concentrating in situ bacteria and viruses in groundwater samples. Water samples from nine wells tapping a shallow sandy aquifer in a densely populated village in Bangladesh were reduced in volume approximately 400‐fold using ultrafiltration. Culture‐based assays for total coliforms and Escherichia coli, as well as molecular‐based assays for E. coli, Bacteroides, and adenovirus, were used as microbial markers before and after ultrafiltration to evaluate performance. Ultrafiltration increased the concentration of the microbial markers in 99% of cases. However, concentration factors (CF = post‐filtration concentration/pre‐filtration concentration) for each marker calculated from geometric means ranged from 52 to 1018 compared to the expected value of 400. The efficiency was difficult to quantify because concentrations of some of the markers, especially E. coli and total coliforms, in the well water (WW) collected before ultrafiltration varied by several orders of magnitude during the period of sampling. The potential influence of colloidal iron oxide precipitates in the groundwater was tested by adding EDTA to the pre‐filtration water in half of the samples to prevent the formation of precipitates. The use of EDTA had no significant effect on the measurement of culturable or molecular markers across the 0.5 to 10 mg/L range of dissolved Fe²⁺ concentrations observed in the groundwater, indicating that colloidal iron did not hinder or enhance recovery or detection of the microbial markers. Ultrafiltration appears to be effective for concentrating microorganisms in environmental water samples, but additional research is needed to quantify losses during filtration.     

Phytoplankton dynamics within Gulf Stream intrusions on the southeastern United States continental shelf during summer 1981

During July and August 1981 subsurface intrusion of upwelled nutrient-rich Gulf Stream water was the dominant process affecting temporal and spatial changes in phytoplankton biomass and productivity of the southeastern United States continental shelf between 29 and 32°N latitude. Intruded waters in the study area covered as much as 10¹ km including virtually all of the middle and outer shelf and approximately 50% of the inner shelf area.Within 2 weeks following a large intrusion event in late July, middle shelf primary production and Chl a reached 3 to 4 gC m⁻ d⁻¹ and 75 mg m⁻, respectively. At the peak of the bloom 80% of the water column primary production occurred below the surface mixed-layer, and new primary production (i.e., NO₃-supported) exceeded 90% of the total. Chl a-normalized photosynthetic rates were very high as evidenced by high mean assimilation number (15.5 mg C mg Chl a⁻¹ h⁻¹), high mean α (14 mg C mg Chl a⁻¹ Ein⁻¹ m), and no photoinhibition. As a result of the high photosynthetic rates, mean light-utilization index (Ψ) was 2 to 3 times higher than reported for temperature sub-arctic and arctic waters.The results imply a seasonal (June to August) middle shelf production of 150 g C m⁻¹, about 15% higher than previous estimates of annual production on the middle shelf. Intrusions of the scale we observed in 1981 may not occur every summer. However, when such events do occur, they are by far the most important processes controlling summer phytoplankton dynamics of the middle and outer shelf and of the inner shelf in the southern half of the study area.     

Anisotropic reverse-time migration for tilted TI media

Seismic anisotropy in dipping shales results in imaging and positioning problems for underlying structures. We develop an anisotropic reverse‐time depth migration approach for P‐wave and SV‐wave seismic data in transversely isotropic (TI) media with a tilted axis of symmetry normal to bedding. Based on an accurate phase velocity formula and dispersion relationships for weak anisotropy, we derive the wave equation for P‐wave and SV‐wave propagation in tilted transversely isotropic (TTI) media. The accuracy of the P‐wave equation and the SV‐wave equation is analyzed and compared with other acoustic wave equations for TTI media. Using this analysis and the pseudo‐spectral method, we apply reverse‐time migration to numerical and physical‐model data. According to the comparison between the isotropic and anisotropic migration results, the anisotropic reverse‐time depth migration offers significant improvements in positioning and reflector continuity over those obtained using isotropic algorithms.     

Estimating the mean temperature and salinity of the Chesapeake Bay mouth

We used an extensive temperature and salinity data set to develop a statistically meaningful way of estimating mean temperature and salinity from discrete measurements in the mouth of Chesapeake Bay. From April 1992 to December 1998, the Center for Coastal Physical Oceanography completed 73 monthly hydrographic sections at high spring tide across the mouth of Chesapeake Bay. Time series of area weighted mean bay mouth temperature (MBMT) and salinity (MBMS) were calculated. We found that at any time the temperature at any location in the section correlated with the MBMT with a r² of 0.95 or better. A similar analysis for salinity showed that the best correlation was about 0.9 with many locations below 0.8. A correlation between MBMT and temperature at a nearby tide station indicated it was possible to estimate MBMT from the temperature at the tide station to ±0.74°C (90% confidence interval). Salinity was not measured at the tide station, but the correlation at a location in the section similar to the tide station indicates that MBMS can be estimated with an error of ±1.5 (90% confidence interval).