On the heat flow of a gravitationally-differentiated moon of fission origin

It is shown that the mean value for the heat flow of a gravitationally-differentiated Moon of fission origin is about 13 erg cm^?2 s^?1 and that the heat flow varies regionally from about 3 erg cm^?2s^?1 to more than 45 erg cm^?2s^?1. These regional variations in the heat flow are caused by a non-uniform distribution of K, U and Th in the KREEP zone at the crust-upper mantle boundary and the redistribution of crustal materials and K, U and Th rich KREEP materials by basin-forming impacts. The scale of these regional variations is hundreds of km. The models presented are in accord with the Apollo 15 and 17 heat flow measurements.     

Nutrient load estimates for Manila Bay,Philippines using population data

A major source of nutrient load to periodically hypoxic Manila Bay is the urban nutrient waste water flow from humans and industries to surface water. In Manila alone, the population density is as high as 19,137 people/km². A model based on a global point source model by Morée et al. (2013) was used to estimate the contribution of the population to nitrogen and phosphorus emissions which was then used in a water transport model to estimate the nitrogen (N) and phosphorus (P) loads to Manila Bay. Seven scenarios for 2050 were tested, with varying degrees and amounts for extent of sewage treatment, and population growth rates were also included. In scenario 1, the sewage connection and treatment remains the same as 2010; in scenario 2, sewage connection is improved but the treatment is the same; in scenario 3, the sewage connection as well as treatment is improved (70% tertiary); and in scenario 4, a more realistic situation of 70% primary treatment achieved with 100% connection to pipes is tested. Scenarios 5, 6, and 7 have the same parameters as 1, 2, and 3 respectively, but with the population growth rate per province reduced to half of what was used in 1, 2, and 3. In all scenarios, a significant increase in N and P loads was observed (varying from 27% to 469% relative to 2010 values). This was found even in scenario 3 where 70% of the waste water undergoes tertiary treatment which removes 80% N and 90% P. However, the lowest increase in N and P load into the bay was achieved in scenarios 5 to 7 where population growth rate is reduced to half of 2010 values. The results suggest that aside from improving sewage treatment, the continued increase of the human population in Manila at current growth rates will be an important determinant of N and P load into Manila Bay.

     

Development of efficient and robust Eikonal solver variants for first-arrival seismic modeling

Computational Geosciences - We have developed and tested a new Eikonal first-arrival forward model scheme by combining a fast marching method (FMM) algorithm, an upwind Eikonal solver scheme first...     

A geochemical approach to distinguishing competing tectono-magmatic processes preserved in small eruptive centres

Small eruptive centres (SECs) representing short-lived, isolated eruptions are effective samples of mantle heterogeneity over a given area, as they are generally of basaltic composition and show evidence of little magmatic processing. This is particularly powerful in volcanic arcs where the original melting process generating stratovolcanoes is often obscured by additions from the down-going slab (fluids and sediments) and the overlying crust. The Pucón area of southern Chile contains active and dormant stratovolcanoes, Holocene, basaltic SECs and an arc-scale strike-slip fault (the Liquiñe Ofqui Fault System: LOFS). The SECs show unexpected compositional heterogeneity considering their spatial proximity. We present a detailed study of these SECs combining whole rock major and trace element concentrations, U-Th isotopes and olivine-hosted melt inclusion major element and volatile contents to highlight the complex inter-relations in this small but active area. We show that heterogeneity preserved at individual SECs relates to different processes: some start in the melting region with the input of slab-derived fluids, whilst others occur later in a centre’s magmatic history with the influence of crustal contamination prior to olivine crystallisation. These signals are deduced through the combination of the different geochemical tools used in this study. We show that there is no correlation between composition and distance from the arc front, whilst the local tectonic regime has an effect on melt composition: SECs aligned along the LOFS have either equilibrium U-Th ratios or small Th-excesses instead of the large—fluid influenced—U-excesses displayed by SECs situated away from this feature. One of the SECs is modelled as being generated from fluid-enriched depleted mantle, a source which it may share with the stratovolcano Villarrica, whilst another SEC with abundant evidence of crustal contamination may share its plumbing system with its neighbouring stratovolcano Quetrupillán, showing that polygenetic–monogenetic connections are unpredictable. Such marked preservation of individual magmatic histories highlights the isolation of individual melting events even in complex and highly volcanically active areas.     

Humid Pleistocene−Holocene transition and early Holocene in sub‐tropical northern Mexico and possible Gulf of California forcing

A new geochemical record from the paaleolake Santiaguillo documents the hydrological variability of sub‐tropical northern Mexico over the last ～14 cal. ka. Summer‐season runoff, lake water salinity and deposition of sediments by aeolian activity were reconstructed from concentrations of K, Ca and Zr/K in bulk sediments. More‐than‐average runoff during c. 12.3–9.3 cal. ka BP represented an interval of enhanced summer precipitation. Arid intervals of c. 14–12.3 cal. ka BP and c. 6–4.3 cal. ka BP were characterized by average and more‐than‐average aeolian activity. Comparison with proxy records of summer as well as winter precipitation from tropical and sub‐tropical North America and sea surface temperatures from the Atlantic and Pacific provides insight into the source of moisture and possible forcing. The wet Pleistocene?Holocene transition and early Holocene was contemporary with warmer conditions in the Gulf of California. We suggest that the Atlantic had minimal influence on the summer precipitation of the western part of sub‐tropical northern Mexico and that the source of moisture was dominantly Pacific.     

Ecology of testate amoebae in peatlands of central China and development of a transfer function for paleohydrological reconstruction

Testate amoebae are a diverse and abundant group of protozoa that constitute a large proportion of biomass in many ecosystems and probably fill important roles in ecosystem function. These microorganisms have attracted the interest of paleoecologists because the preserved shells of testate amoebae and their known hydrological preferences enable reconstruction of past hydrological change. In ombrotrophic peatlands, surface wetness reflects hydroclimate, so testate amoebae can play an important role in reconstruction of Holocene climate change. Previous studies, however, have been geographically restricted, mostly to North America and Europe. We studied the ecology of testate amoebae in peatlands from central China in relation to hydrology, pH and metal concentrations. We found that testate amoeba community structure was correlated with depth to water table (DWT) and that the hydrological preferences of species generally matched those of previous studies. We developed a weighted average DWT transfer function that enables prediction of water table depth with a cross-validated mean error of <5 cm. Our results demonstrate the potential for using testate amoebae to reconstruct paleohydrology in China. Such studies could contribute to our understanding of Holocene climate changes in China, particularly regarding past Asian monsoon activity.     

Post-imbrian global lunar tectonism: Evidence for an initially totally molten Moon

Evaluation of all reasonable sources of stress in the lunar crust indicates that compressional thermoelastic stresses are the only ones which have been tectonically significant on the global scale during the last 3.5×10⁹ yr of lunar history — i.e., the post-Imbrian. However, the thermoelastic stresses calculated for lunar models which have accretional heating profiles at the beginning of lunar history; i.e., a molten zone only a few hundred kilometers deep and a cool deep interior, are less than 1 kbar in the crust. Such stresses are lower than the more than 1 to 7 kbar needed to initiate thrust faulting in the outer crust according to Anderson's theory of thrust faulting. Thus such accretional models predict that no significant global thrust faulting has occurred during the post-Imbrian and that the crust should currently be seismically quiet on the global scale.In contrast, the compressional thermoelastic stresses generated in a Moon which was initially totally molten, as is the case if the Moon formed by fission, are up to 3.5 kbar in the outer few km of the crust at present. These stresses are well within the range needed to cause thrust faulting in the outer 4 km of the crust. According to this model there should be modest scale (10 km), young ( 0.5 to 1×10⁹ yr old) thrust fault scarps in the highlands.Photoselenological investigations confirm that scarps with the expected age and geometric characteristics are found in the highlands. Thus the currently available photoselenological data support the stress model derived for an initially totally molten Moon, but not one which was molten only in the outer few hundreds of km.     

Breaking solitary wave evolution over a porous underwater step

Solitary wave evolution over a shelf including porous damping is investigated using Volume-Averaged Reynolds Averaged Navier–Stokes equations. Porous media induced damping is determined based on empirical formulations for relevant parameters, and numerical results are compared with experimental information available in the literature. The aim of this work is to investigate the effect of wave damping on soliton disintegration and evolution along the step for both breaking and non-breaking solitary waves. The influence of several parameters such as geometrical configuration (step height and still water level), porous media properties (porosity and nominal diameter) or solitary wave characteristics (wave height) is analyzed. Numerical simulations show the porous bed induced wave damping is able to modify wave evolution along the step. Step height is observed as a relevant parameter to influence wave evolution. Depth ratio upstream and downstream of the edge appears to be the more relevant parameter in the transmission and reflection coefficients than porosity or the ratio of wave height–water depth. Porous step also modifies the fission and the solitary wave disintegration process although the number of solitons is observed to be the same in both porous and impermeable steps. In the absence of breaking, porous bed triggers a faster fission of the incident wave into a second and a third soliton, and the leading and the second soliton reduces their amplitude while propagating. This decrement is observed to increase with porosity. Moreover, the second soliton is released before on an impermeable step. Breaking process is observed to dominate over the wave dissipation at the porous bottom. Fission is first produced on a porous bed revealing a clear influence of the bottom characteristics on the soliton generation. The amplitude of the second and third solitons is very similar in both impermeable and porous steps but they evolved differently due to the effect of bed damping.