Site investigation and evaluation of properties of soil or rock are important aspects of geotechnical design. Determination of the ground stiffness is one of the important parameters in geotechnical engineering. Since the measurement of shear modulus is very sensitive to soil disturbance, especially for sand, determination of the stiffness of soil in the field is more reliable than in laboratory tests on sampled specimens. Measurement of shear modulus is one of the most common applications of self-boring pressuremeter testing. As an in situ device, the pressuremeter provides a unique method for assessing directly the in situ shear modulus of a soil. This paper describes a laboratory study of silica sand stiffness, which varies with stress level and strain amplitude. The results show that the elastic shear modulus value is mainly dependent on the value of the mean effective stress and relative density. 相似文献
The site amplification is estimated at five seismic stations of the Latur region using the horizontal to vertical spectral ratios of 33 aftershocks of the main Killari earthquake of September 29, 1993 (UTC). Spectral amplifications, ranging from a factor of 2–6 are found to vary with frequency at different places. Significant amplification is found at four sites within the Latur region, at Basavakalyan, Kasgi, Killari, and Mudgad Eakoji villages. Our results show a positive correlation between the site amplification and the damage pattern in area. The pattern and the nature of the site amplification estimated in the present study corroborates also with the analytical models and the borehole data indicating alternating layers of unconsolidated sediments and basaltic rocks. 相似文献
Loess and loess-like deposits were much studied in the Soviet Union, and are currently under investigation in Russia and surrounding countries. There is a vast literature in Russian, which touches on all aspects of loess science and technology. In particular, the studies of the origin of collapsibility are almost totally in Russian, and of course studies on the various regions of Russia and the countries of the Former Soviet Union FSU appear in Russian. This review looks at the literature in Russian and attempts to pick out key contributors, major topics and works and to identify the critical regions and zones of investigation. Because so many regions of the FSU had people living on loess ground, there is a vast literature on engineering geology and ground engineering topics, and this tends to dominate all the literature on loess in Russian. Following Russian practice, the fine-grained deposits under consideration are divided into loess and loess-like deposits. Three main topics are recognised across the whole spectrum of loess research: formation and distribution of loess deposits; stratigraphy, cyclicity and palaeoclimatology; and engineering topics, in particular hydrocollapse and subsidence, and we concentrate on the engineering geology topics. An attempt is made, based on the map of Abelev and Abelev [Abelev, Yu.M., Abelev, M.Yu., 1968. Fundamentals of design and construction on collapsible macroporous soils, 2nd ed. Stroiizdat, Moscow, 431 pp. (in Russian)] of collapsing loess deposits, to define seven loess regions within the geographical limits of the old USSR. The seven regions are those where geotechnical problems might be expected. 相似文献
The legacy inherited from anthropogenic processes needs to be addressed in order to provide reliable and up-to-date ground information relevant to development and regeneration in the urban environment. The legacy includes voids as well as anthropogenic deposits (artificial ground). Their characteristics derive from former quarrying and mining activities industrial processes creating derelict ground, variably consolidated made ground, and contaminated groundwater and soils. All need to be systematically assessed to inform the planning process and provide the basis for engineering solutions. Site-specific investigation needs to be conducted on the back of good quality geoscientific data. This comes from ‘field’ survey, remotely sensed data interpretation, historical maps, soil geochemical sampling, and geotechnical investigation. Three-dimensional and, in the future, four dimensional, characterization of superficial deposits is required to reach an understanding of the potential spatial lithological variability of artificial ground and the geometry of important surfaces, i.e. the boundary conditions. The classification scheme for artificial ground outlined in this paper and adopted by the British Geological Survey, will help in achieving this understanding. 相似文献
The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.
The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.
The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak. 相似文献
Accidental spills of hydrocarbons, such as Light Non-Aqueous Phase Liquids (LNAPLs), are one of the most common sources of subsurface contamination. Migration of LNAPL in a porous medium is influenced by various factors such as the number of fluids present in the unsaturated/saturated zones and the proportion of pores occupied by each fluid. The results for relationship between matric suction and degree of saturation are presented in this paper for water–air, water–LNAPL and LNAPL–air systems in a sand. A simple and reliable setup using Buchner funnel was designed to obtain these relations. It was found that the relationship between matric suction head and degree of saturation is hysteretic for all the fluid systems (water–air, water–LNAPL and LNAPL–air). Furthermore, the amount of hysteresis depended upon the fluid system, with the maximum hysteresis occurring for water–air system. The results suggest that the amount of trapped air depends upon the reversal degree of saturation from drying to wetting. 相似文献
This paper describes the issues related to using handheld devices to interrogate wirelessly large-scale geophysical data over the Web using a client–server configuration. A modification of our current Web-based data interrogation program addresses specifically the limitations of current handheld devices with wireless access, such as processor speed, screen size and resolution, memory, and network speeds. The system uses a combination of Java, Python, and C in order to run remotely from the handheld device, while incorporating the power and memory capacity of a large workstation server. 相似文献
Formation of rhythmical layering in intrusive basic and ultrabasic rock bodies is explained in different ways, in particular, by the movement of microparticles (mineral clusters) of plagioclase and pyroxene within the basalt melt under the influence of thermal and gravitational forces. A model of cluster movement is proposed as a consequence of the forces appearing when ultrasonic elastic fluctuations pass through the melt. The model is based on fundamental dynamic equations. Depending on cluster density, wave parameters, and magmatic chamber size, in the melt there can form different combinations of rhythmically alternating layers of different composition. 相似文献