天然气溶解过程中组分分馏模型及其应用

天然气不同组分在水中溶解度的差异,导致溶解相与残留游离相天然气组分组成不同,即发生组分的溶解分馏效应。溶解分馏效应在天然气水溶运移、溶解散失等过程中均有发生。揭示天然气组分的溶解分馏规律、建立定量分馏模型,有助于天然气气源对比和成藏过程示踪。以Henry定律为依据,对不同组分溶解特征分析,提出了溶解度分数的概念,并建立了溶解分馏模型。根据该模型和各组分的溶解度分数和天然气溶解量,可计算各组分的溶解分馏量,恢复天然气初始组成特征。计算表明,威远震旦系气藏初期的天然气组成为:CH4为72.70%,C2H6为0.09%,CO2为22.41%,N2为4.07%,干燥系数(C1/C1-5)为99.876%。溶解作用使天然气中CO2含量显著降低,烃类气体含量增加,而天然气干燥系数降低。结果有助于天然气成因判识和气源对比等。     

准噶尔盆地中部III 区块原油中25-降藿烷分布特征与成因意义

通过对准噶尔盆地中部Ш区块原油或油砂抽提物的饱和烃气相色谱-质谱分析,研究了原油或油砂抽提物中25-降藿烷的分布规律.结果表明,不同井区或同一口井不同深度(层位)的原油25-降藿烷的相对含量存在比较明显的差别,表明其所遭受的生物降解程度有所差异,沿构造带从南到北,同一油层中原油的生物降解程度增强,比如位于构造北部(构造部位相对较高)的永1井、永3井侏罗系原油25-降藿烷丰度较高,表明生物降解比较明显,而位于南部(构造低部位)的永6井白垩系和侏罗系油层中的原油均无明显的生物降解现象;同一口井随深度增大生物降解作用将弱,如永2井浅部白垩系油层的原油降解较严重,而深部西山窑组的原油降解作用则不明显.根据原油生物降解的特征,结合车-莫古隆起调整对研究区油气成藏的影响,讨论了原油生物降解差异分布的成因机制.     

Response of riparian vegetation to water-table changes in the lower reaches of Tarim River, Xinjiang Uygur, China

The lower reaches of Tarim River in the Xinjiang Uygur region of western China had been dried out for more than 30 years before water began to be diverted from Konqi (Peacock) River via a 927-km-long channel in year 2000, aimed at improving the riparian ecological systems. Since then, eight intermittent water deliveries have been carried out. To evaluate the response of riparian vegetation to these operations, the groundwater regime and vegetation changes have been monitored along the 350-km-long stem of the river using a network of 40 dug wells at nine transects across the river and 30 vegetation plots at key sites. Results show that the water table rose remarkably, i.e. from a depth of 9.87 m before the water delivery to 3.16 m after the third water delivery. The lateral distance of affected water table extended to 1,050 m from the riverbank after the fourth water delivery. The riparian vegetation has changed in composition, type, distribution, and growing behavior. This shows that the water deliveries have had significant effects on restoration of riparian ecosystems.     

Interactive 3-D computation of fault surfaces using level sets

Deformable implicit surfaces, implemented with level set methods, have demonstrated a great potential in the computational sciences for applications such as modeling, simulation, and segmentation. They allow implicit handling of complex topologies deformed by operations where large changes can occur without destroying the level set representation. The use of level set techniques for the computation and segmentation of plane-like and high positive curvature features is nontrivial. We present a technique for representing and extracting fault surfaces from 3-D seismic attribute data such that 2-manifolds can be interactively computed and segmented. We present our approach as an interactive workflow that generates highly accurate fault surfaces.     

A virtual voyage through 3D structures generated by chaotic mixing of magmas and numerical simulations: a new approach for understanding spatial and temporal complexity of magma dynamics

In this contribution, we present a virtual voyage through 3D structures generated by chaotic mixing of magmas and numerical simulations with the aim to highlight the power of 3D representations in the understanding of this geological phenomenon. In particular, samples of mixed juveniles from Salina island (Southern Italy) are reconstructed in 3D by serial lapping and digital montage and numerical simulations are performed by using a 3D chaotic dynamical system. Natural and simulated magma mixing structures are visualized by using several multimedia tools including animations and “virtual reality” models. It is shown that magma interaction processes can generate large spatial and temporal compositional heterogeneities in magmatic systems. The same topological structures are observed in both 3D reconstructed rock samples and chaotic numerical simulations, indicating that the mixing of magmas is governed by chaotic dynamics. The use of 3D multimedia models gives the opportunity to penetrate into magma mixing structures and to understand their significance in the context of magma dynamics. Such an approach is very powerful since multimedia tools can strongly capture the attention of the reader bringing him/her into an interactive and memorable geological experience. Electronic supplementary material  enclosed:     

北京市有机氯农药填图与风险评价

采用1个样/km2的密度、1个分析组合样/16km2的方法,对北京市784km2范围内的土壤、大气干湿沉降物、大气颗粒物中HCH、DDT的含量和空间分布特征进行有机氯农药填图.查明2000年北京市地表土壤HCH和DDT的平均含量分别为8.80±11.83ng/g、108.99±301.90ng/g.2006年大气干湿沉降物中HCH和DDT平均含量分别为10.09±9.60ng/g、12.99±13.51ng/g,HCH和DDT的年沉降通量分别为996.57±939.96g/a·km2、1291.53±1342.28g/a·km2.2006年大气颗粒物PM10和PM2.5中的HCH含量分别为0.294±0.205ng/m3和0.217±0.137ng/m3,DDT的平均含量分别为1.037±1.301ng/m3和0.522±0.773ng/m3,显著高于2002-2003年度大气颗粒物中HCH(PM100.01786ng/m3,PM250.01731ng/m3)和DDT(PM100.01672ng/m3,PM2.50.02353ng/m3)的含量,表明北京市或周边地区仍在使用含HCH和DDT化学成分的农药.以2000年北京地表土壤和2006年大气干湿沉降物中HCH和DDT的含量为基础,对2020年土壤中HCH和DDT的时空演变的预测显示,即使干湿沉降物中HCH和DDT的沉降通量每年以5%的速率递减,到2020年土壤中HCH和DDT的环境质量仍不能显著改善,而控制和削减北京及周边地区含HCH和DDT成分农药的使用将是改善北京地表土壤环境质量的关键措施.     

基于ICCP算法的重力辅助惯性导航

迭代最近等值线算法(ICCP)是一种重要的匹配导航算法,文中首先介绍ICCP算法的基本原理,随后在0.2′×0.2′重力异常数据库的基础上,利用ICCP算法进行仿真计算得到最佳匹配位置。最后为了验证匹配位置是否可用于修正惯导误差,提出将匹配位置误差作为观测量,用卡尔曼滤波对惯导系统误差进行最优估计。由最后的仿真结果可以看出,ICCP算法可有效抑制惯导纬度误差的增长,且最大纬度误差不超过2,′以匹配位置误差作为观测量可以用来估计惯导方位误差角。     

顾及DEM误差自相关的坡度计算模型精度分析

基于DEM的坡度计算,其误差来源于DEM误差、DEM结构和坡度计算模型。在顾及DEM误差自相关的前提下,对四种DEM坡度计算模型进行了分析和评价。研究表明,三阶不带权差分能给出较高的坡度计算精度;在局部窗口中,格网点数量越多,坡度计算越准确;等权比不等权的坡度计算模型更准确;DEM误差自相关结构形式对坡度计算无影响。进一步的理论分析和试验分析还表明：DEM误差自相关性的存在,不仅能够改善地形分析的精度,也能改善DEM自身精度。     

遥感技术在煤炭资源开发状况监督管理中的应用研究

利用高分辨率遥感图象可以快速查明煤炭资源开发状况以及煤炭资源开发的合法性（界内开采、界外开采、越界开采）等,对煤矿安全生产及维护矿业秩序具有重要意义。以我国中部某煤炭开采密集区为试验区,选择不同分辨率的遥感数据,从矿山铺助设施、道路、矿堆、矸石的特征出发,进行矿山开采状况遥感解译;以地理信息系统技术（GIS）为支撑实现采矿权数据、规划数据图层与遥感专题数据的叠加分析和相关分析,判断非法与越界矿山,评价矿产资源开发与保护规划执行情况。     

Geostatistical analysis of arsenic concentration in the groundwater of Malda district of West Bengal, India

The problem of arsenic (As) poisoning in the upper deltaic plain of the Ganga-Bhagirathi river system in the Bengal Basin of West Bengal, India is an alarming issue. Four blocks (Kaliachak-1, 2, 3 and English Bazar) of Malda district, West Bengal were critically studied. Geomorphologically, the area exhibits three terraces: the present Youngest terrace (T₀-terrace), the Older Shaugaon Surface (T₁-terrace) and the Oldest Baikunthapur Surface (T₂-terrace). On the basis of numerous measurements, including As-content, pH, DO, specific conductivity and salinity, it was observed that maximum As-content beyond the permissible limit (0.05 mg/L, Indian standard) occurs within a depth range of 10–30 m with a non-linear distribution pattern. Variance test also found that a block effect was highly significant in an As-distribution pattern. Mean arsenic level of Kaliachak block-1 is 0.2253 mg/L, followed by Kaliachak-2 with arsenic level 0.1923, Kaliachak-3 with arsenic level 0.1755 and English Bazar with arsenic level 0.1324. The arsenious belt lies mainly within the Older terrace (T₁). The very recent flood plain deposits of silvery white, fine sands lying very close to the Ganga River margin do not contain significant amounts of As. Elevated As-concentration in the ground water was observed in alluvial sands, grayish white to brownish in color and occurring away from the Ganga margin. The Oldest terrace (T2) further away from the Ganga margin (e.g. English Bazar) and Barind surface contains less arsenic. Barind surface acts as a hard capping with ferruginous sands and lateritic concretions-chocolate, mottled and purple brown in color-occurring northeast of the studied area. Arsenic content of ground water in the same locality within a radius of ∼ 20 m varies within wide limits. Thus, it poses problem to delineate its distribution pattern. Such a patchy occurrence possibly could not be explained satisfactorily solely by geomorphology. Chemical analysis of aquifer clay samples of the cores shows a maximum Ascontent of up to 3 mg/kg, whereas the bulk samples (sandclay mixture) of the cores contain a maximum of 17 mg/kg As-value. Therefore, it is not always true that clay contains elevated As-value.