Case history of controlling a landslide at Panluo open-pit mine in China

Controlling of landsides safely and economically is a great challenge to mine operators because landslides are major geological problems especially in open-pit mines. In this paper, a case history at Panluo open-pit mine is presented in detail to share the experiences and lessons with mine operators. Panluo open-pit mine is located in the southwestern Fujian province of China. It is the largest open-pit iron mine in the Fujian province and was planned in 1965 and is in full operation from 1978. In July 1990, an earthquake of magnitude 5.3 in Taiwan Strait and big rainstorms impacted the mine slope, causing tension cracks and rather large-scale failures, and forming a U-shaped landslide. Total potential volume was estimated to be up to 1.0 × 10⁶ m³. This directly threatened the mine production. In order to protect the mine production and the dwellers’ safety around, a dynamic comprehensive method was implemented including geotechnical investigations, in-situ testing and monitoring, stability analysis, and many mitigation and preventive measures. These measures slowed down the development and further occurrence of the landslide. The results showed that the landslides were still active, it was slowed with the control measures and moved rapidly with rainfall and mining down. However, no catastrophic accidents occurred and the pit mining was continued till it was closed at the elevation of 887 m in 2000. As a successful case of landslide control at an open-pit mine for 10 years, this paper reports the controlling measures in details. These experiences of landslide control may be beneficial to other similar mines for landslide control.     

Shear strength characterization of municipal solid waste at the Suzhou landfill, China

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.     

储量计算与勘探线剖面计算机辅助成图一体化

引入关系教据库和GIS自动编图技术,改进传统的垂直断面法储量计算过程,可实现矿山储量计算和勘探线剖面计算机辅助成图的同步和一体化.在共用的矿山地矿信息点源数据库平台基础上.通过设置本地数据库,形成GIS操作时的外挂属性库,用来保存储量计算和机助成图过程中的动态数据.储量计算中的每一步骤中,用户以GIS为操作界面来同步实现对空间图元和外挂属性的操作,这其中对工程样段组合、矿体边界圈连和剖面制图综合等开发了大量自动化辅助功能.储量计算的各步完成后,勘探线剖面图和储量报表即同步生成.这种改进的工作方式实现了垂直断面法全过程的计算机辅助化,将提高这一传统方法的应用效率.     

跨孔电阻率法有限元数值模拟及反演

油气资源和矿产资源勘探中,常需要较大的勘探深度和较高的深部分辨能力.充分利用现有钻孔的井地或跨孔电阻率成像技术适应这种要求,但引起的视电阻率响应复杂,从而给资料的正确处理与解释带来一定的困难,为此有必要通过正演数值模拟和反演相结合的手段,对理论模型井地或跨孔装置的响应异常规律进行研究.文章通过设计一个典型地质模型,利用Ansys有限元软件对模型进行2D跨孔电阻率法有限元正演计算,并将模拟的响应视电阻率作为反演的输入,结合平滑约束最小二乘反演,分析了异常特征和分布规律.     

利用MC-ICPMS对水样中硼同位素比值的测定

采用Amberlite IRA-743硼特效树脂进行水溶液中硼的分离,对洗脱液温度、体积以及树脂动态交换容量等进行了实验.它的动态交换容量为4.2 mg/g,在室温条件下,用5 mL 2%HNO3可定量从树脂柱上洗脱被吸附的硼.采用Neptune型MC-ICPMS进行硼同位素组成的测定,1 μg/g浓度的硼标准溶液获得放大的信号强度约为0.7V,硼的化学分离过程有效避免了质量歧视效应.实验结果表明,MC-ICPMS对硼存在严重的记忆效应,通过采用5%HNO3-(1%HNO3 0.1%HF)-H2O-20%NH3H2O-H2O的交替清洗方法,可在约1 h内消除硼的记忆效应.在最佳仪器条件下,对含有250 ng硼的水样,可以快速测定硼的同位素组成,占δ11B测定的绝对偏差为0.4‰-0.5‰(SD).     

邹平王家庄铜矿床成矿地球化学及成因探讨

王家庄铜矿床的矿化脉石英中流体包裹体均一温度介于116 ~ 566 ℃之间,均值为 289 ℃;盐度介于7.2%～63.2% NaCleq,均值为21.1% NaCleq。流体的气相成分主要为H2O和CO2。在均一温度为240 ~ 440 ℃区间内,出现了富气相的两相水溶液包裹体、富液相的两相水溶液包裹体和含子晶的三相水溶液包裹体共存现象,以及加温后富气相包裹体均一到气相和同期富液相包裹体均一到液相的特征,表明成矿流体曾发生过沸腾作用;其中第一次发生于360 ~ 400 ℃,主要形成高温、高盐度含子晶的三相水溶液包裹体和高温、中盐度富液相的两相水溶液包裹体及高温、低盐度富气相的两相水溶液包裹体;第二次发生于240 ~ 320 ℃,主要形成高—中温、高盐度的含子晶的三相水溶液包裹体和高—中温、中盐度富液相的两相水溶液包裹体及高—中温、低盐度富气相的两相水溶液包裹体;之后主要形成富液相的两相水溶液包裹体,具有中低温和中盐度的特征。矿化脉石英中的δ18OH2O介于-1.14‰ ~ 1.79‰之间,均值为0.94‰;δD介于-63.70‰ ~ -56.50‰之间,均值为-59.8‰;说明王家庄铜矿床的成矿流体主要来源于岩浆,后期混入大气降水。矿石矿物的δ34S变化于-8.80‰ ~ -2.80‰之间,均值为-6.33‰。矿石矿物的n(206Pb)/n(204Pb)介于18.1684 ~ 18.3637之间,均值为18.2892;n(207Pb)/n(204Pb)介于155546 ~ 156342之间,均值为155777;n(208Pb)/n(204Pb)介于38.1286 ~ 38.4840之间,均值为38.2780。说明矿石具有贫重硫和富放射性成因铅的特征,硫、铅主要来源于深部,后期可能受到地壳物质或大气降水的混染。     

碳酸盐岩裂缝与岩溶作用研究

从构造与非构造作用角度出发,突出研究断层对裂缝的控制作用、断裂与岩溶的关系和裂缝与岩溶之间的关系,揭示碳酸盐岩裂缝与岩溶的发育规律。研究表明：构造裂缝为岩溶发育提供岩溶作用进行的有利通道,非构造裂缝则可以加速溶蚀作用的进行,促进岩溶的发育;裂缝与岩溶之间的关系始终是相辅相成、相互促进的关系。     

河南省栾川县罗村钼矿成矿特征及找矿

通过对河南省栾川县罗村钼矿区域地质背景、矿床地质特征与南泥湖、三道庄及东沟超大型钼矿的综合对比、分析、研究,总结归纳了矿区NWW构造形迹、小岩体与钼矿成矿关系、围岩对成矿的控制作用、围岩蚀变与成矿的关系、地球化学异常与钼矿床的关系等成矿特征.根据罗村钼矿的成矿特征,初步指出今后的找矿方向.