An experimental study of nominally symmetric and asymmetric structures isolated with the FPS

This experimental investigation deals with the earthquake behaviour of a nominally symmetric and a mass‐asymmetric three‐storey structural model isolated with the frictional pendulum system (FPS). Both accidental and natural torsion are evaluated in the structure by using recorded accelerations in all building floors and measured deformations at the isolation level. A 3D‐shaking table was used to subject the model to five different ground motions, including impulsive as well as far‐field subduction‐zone type earthquakes. Results show that the analytical predictions of the earthquake behaviour of the isolated structure, as obtained from a physical model of the FPS, are in close agreement with the true complex inelastic measured behaviour of the FPS. Besides, experimental results also validate previous observations about the importance of accounting for the variability of the normal loads in modelling the earthquake behaviour of FPS isolators. Measured torsional deformation amplifications at the base of the building vary, in the mean, from 2.5% to 6% for the symmetric and asymmetric structural configurations, respectively. In relation to the fixed base structure, the reduction factors for the base shear of the isolated structure are, in the mean, about 3.9 for both configurations. Finally, it is concluded that the FPS is capable of controlling the lateral–torsional motions of mass‐asymmetric structures quite effectively by aligning the centre of mass of the superstructure with the centre of pendular and frictional resistance of the isolation system. Copyright © 2003 John Wiley & Sons, Ltd.     

Physical model for dynamic analysis of structures with FPS isolators

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.     

渭干河流域"2002·7"特大洪水分析

渭干河是塔里木河流域第六大源流, 位于天山西部南麓, 渭干河干流起点有新疆最大的流域性控制工程--克孜尔水库. 2002年7月下旬天山中西部山区出现大暴雨(雪)过程, 渭干河流域山区降水持续时间长达30 h以上, 山区降水量50 mm左右, 导致5条支流和渭干河干流出现有水文记录以来的最大洪峰, 流量超过警戒流量和危险流量的2～3.5倍, 暴雨(雪)过程结束之后, 融雪型洪峰长时间居高不下. 洪水过程中, 各支流以及暴雨与融雪等多种洪峰遭遇现象很明显. 克孜尔水库入库洪峰流量达3 660 m3*s-1, 经水库调洪错峰, 出库峰值流量为1 000 m3*s-1, 削峰率72.7%.     

慕士塔格冰芯钻孔温度测量结果

2002年8月对慕士塔格冰川累积区海拔6300m左右的两根冰芯钻孔(其中—根达到冰川底部基岩)进行了温度测量，揭示了该处冰川的温度分布特征．结果表明：慕士塔格冰芯的冰温是目前中低纬地区山地冰川中最低的，达-21．79℃，该最低温度出现的位置在35m以下；冰床底部的温度为-20．76℃，也远低于其它山地冰川的冰床温度，极低的温度对成冰过程有重要影响，并有利于获得可靠的冰芯记录。     

俄罗斯贝加尔湖-日本石卷地学断面西段地质-地球物理基本特征

对于贝加尔湖-石卷地学断面(BAMSIP)的西段俄罗斯贝加尔湖-中国满洲里断面城内的地质构造背景、地震剖面波类型和基本特征等研究发现：(1)断面域中贝加尔裂谷带地震波速度结构存在异常地幔带；结晶地壳物质成分基性程度较高；基底顶面和Moho界面未观察到明显的镜象关系；(2)西伯利亚南部的复杂相故基底由古生代和前寒武纪岩层所组构；区域构造由古褶皱系、中生代沉积盆地、裂谷带构成。     

浙江桐庐晚奥陶世晚期沉积层序和沉积环境分析

文昌组上段顶部是一套潮汐层理非常发育的泥质砂岩或砂质泥岩,存在双向交错层理,层面有雨痕,应为潮坪沉积。潮坪沉积由小型层序构成,小型层序又是由砂、泥质单层组成。砂质单层底部通常为岩性突变面或侵蚀面,砂质纹层较厚,其中可见对称波痕或泥砾;向上砂质纹层变薄,过渡到泥质单层。砂质单层形成于暴风浪时期,泥质单层是风浪衰减后恢复正常的潮汐沉积。因此,小型层序从成因上说是一风暴层序。碎屑成份、砾石成份分析表明沉积物均来自华夏古陆的沉积岩和变质岩基底。物源一致,岩层产状变化不大,反映文昌组沉积环境稳定。岩性、粒度分析表明文昌组是一向上变细、由浅海高能环境向近岸低能环境过渡的沉积层序。文昌组下段为浅海砂岩沉积,上段顶部为潮坪沉积。二者之间是一套夹砾岩透镜体的泥质粉细砂岩,其沉积环境应介于浅海和滨岸之间,为水下岸坡沉积。砾岩层只是大的沉积旋回中出现的事件性水下冲积物。     

冲绳海槽南部沉积层序的粒度特征

对取自冲绳海槽南部的A2 3孔经前处理后的沉积物样品进行了粒度测试,探讨了陆源沉积层序的粒度特征。沉积物平均粒径、分选系数、偏态、峰态等粒度参数的变化显示出A2 3孔的沉积层序以 4 0 0cm为界可分为上、下两段,下段各参数稳定,代表了比较稳定的水动力条件的沉积环境;上段则波动较大,小规模浊流沉积频繁发育,暗示了不稳定的沉积环境。浊流层内粗粒与细粒组分含量及粒度分布的变化具有明显的规律性。通过分析A2 3孔陆源沉积层序的各沉积参数特征,认为冲绳海槽南部的沉积环境和动力在时间尺度上有较大的变化,东海陆架物质向南部海槽的输运可能是以峡谷为通道的重力作用引起的床底沉积作用为主。另外,对陆源碎屑和全样粒度结果的对比,显示了前处理方法对于海洋沉积物粒度分析的重要性.     

内蒙古苏里格庙地区晚古生代层序地层学研究

通过岩心观察 ,结合测井曲线和地震反射资料分析 ,并根据层序地层和层序界面的识别标志 ,建立了苏里格庙地区的层序地层格架 ,并将上古生界划分为 3个二级层序 (超层序组 )和 15个三级层序 ,其中本溪组和太原组的层序具二元体系域结构 ,即由海进体系域和高位体系域组成 ;山西组、石盒子组和石千峰组的层序具三元体系域结构 ,包括低位体系域、湖进体系域和高位体系域。剖析了陆表海浅陷沉积、陆表海碳酸盐岩与碎屑岩混合沉积及近岸内陆河流—三角洲—湖泊沉积超层序组 (或层序组 )中层序的发育特征 ,论述了层序的演化过程。     

皖北新元古代望山组震积岩的基本特征及其形成环境分析

皖北望山组碳酸盐岩中含有大量液化碳酸盐脉、液化变形、角砾岩等震积岩特征 ,是皖北新元古代地层中含震积岩的重要层位。根据震积岩的特征及其在剖面上的分布将望山组沉积期的地震活动分为三期 ;依据对该组碳酸盐岩的沉积特点的分析认为望山组沉积期的地震活动发生在浅海环境中。这些地震活动与新元古代华北板块内的构造—岩浆活动有关。     

鄱阳湖组(第四系)的修订及特征

根据对鄱阳湖地区 Zk0 1钻孔柱状剖面的研究 ,对鄱阳湖组的定义进行修订、补充 ,认为鄱阳湖组为一套以青灰色淤泥质粘土、黄褐色粘土、粉质粉土为主夹少量粉砂或细砂的湖泊—河口三角洲相沉积。年代地层为第四系全新统 ,底界年龄约 6 2 10± 12 5 a B.P.,开阔湖泊沉积始于 32 4 0± 180 a B.P.,且由北向南时代渐新 ,具有明显的穿时性