Cd, Pb, Cu, Ni and Co distribution in the German Bight

Cd, Pb and Cu concentrations, dissolved and total, have been determined in the German Bight. In 1975, 1977, 1978, 1980 and 1983 water samples were collected at 215 sampling stations. In the 1983 mission samples were also analysed for Ni and Co. The samples were filtered and acidified immediately after collection. Analysis was performed by voltammetry.The analytical data indicate that a net portion of the Cd, the Weser being a distinct source for it, will cross the estuarine zone. Open sea Cd levels in the German Bight are about a factor 10 higher than North Atlantic values. Pb, being transported mainly with the suspended particulate phase (up to 99.5%), is better eliminated by sedimentation in the estuaries. Ni and Cu occur mainly in the dissolved phase. Pollution by Co is distinct in the Elbe, but the output is rapidly diluted to background contents below 10 ng kg⁻¹. An interpretation of the results from the different years yields a rather steady state situation in the German Bight.     

Artificial upwelling induced by ocean currents —Theory and experiment

A submerged apparatus, which consists of a buoy, several horizontal contraction and expansion tubes (Venturi-type tubes) and a long pipe, is expected to be used to pump the subsurface sea-water (200–300 meter depth) containing abundant nutrients to surface layer (50–100 m) by the dynamic of ocean currents. i.e. an artificial upwelling without energy cost. A preliminary experiment and analysis are undertaken and shows that the capacity of pumping the nutrient-rich sea-water is worth to build a pilot prototype model.     

Methodical series tests for fuller ship hull forms

In recent years many fuller ship hull forms have been designed and constructed in various shipbuilding countries, but the data available for the development of the fuller forms are inadequate from the point of view of preliminary ship design. In this paper the authors describe how they have systematically tested vessel forms of block coefficients ranging from 0.80 to 0.90. The analysis and presentation of the test results have been made in such a manner that designers can produce hull forms like those of tankers and other bulk carriers quickly and reliably.     

Particle transport from the West African shelves of Liberia and Sierra Leone to the deep sea: A chemical approach

The chemical and mineralogical composition of suspended particle suites has been used to assess off-shelf transport on the West African shelves of Liberia and Sierra Leone. Using the ratios of Si/Al, Fe/Al, Mg/Al and Mn/Al as tracers, it was possible to detect shelf-derived materials in slope waters. In the majority of cases, these inputs could not have been detected using particle mass or light scattering measurements and could only be measured by using the chemical signatures of the particulate matter. At the time of sampling, the suspensate which had been moved seaward over the slope was detected adjacent to submarine canyons and highly turbid areas on the outer shelf. The chemical and mineralogical composition of the suspensates, and sediments in the adjacent eastern Atlantic basin are similar to those found in the water column seaward of the West African continental shelves and yet distinct from the Sahelian dust which is considered the major source of sedimentary material for the tropical and semi-tropical areas of the deep eastern basin. These findings suggest that materials from this shelf area could be a more important input to the deep sea than was previously realised.     

Incorporation,distribution and fate of saturated petroleum hydrocarbons in sediments from a controlled marine ecosystem

A simulation of a chronic input of petroleum into an estuarine environment was investigated using the facilities at the Marine Ecosystems Research Laboratory at the University of Rhode Island. An oil-water dispersion of No. 2 fuel oil was added to the system (twice weekly for 24 weeks) and the saturated hydrocarbons from this oil were measured in suspended material and sediments. After the initial chronic oil addition, trace amounts of hydrocarbons were detected in the sediments within two weeks, but substantial accumulation was not detected for approximately 135 days. The oil appeared to enter the sediment via the suspended material, with most of the saturated hydrocarbons associated with smaller size sediment particles (< 45 μm to > 0·3 μm). With time, the fuel oil saturated hydrocarbons in the sediments were mixed to a depth of 3 to 4 cm. Although only 12% of the total saturated hydrocarbons added to the system were found in the sediments, these hydrocarbons appear to be relatively stable and were still detectable in these sediments for at least six months after the last oil addition.     

Phosphate adsorption and desorption in a tropical estuary (Maracaibo system)

The Maracaibo Estuary is of particular interest because of its location in the tropics, its large size (over 12,000 km²), the economic importance of its underlying hydrocarbon deposits and its increasing rate of pollution. Sediments from this estuary were studied in order to characterise their capacity to adsorb and desorb phosphorus. Considerable variability in capacity for phosphate sorption was found among the seventeen samples studied. This variability can be attributed first to the differences among the samples in total P content and, secondly, to their differences in free iron content. Also, it appears that P retention contributes to the control of P concentration in the water and therefore the sediments serve as a buffer in controlling P eutrophication in the estuary.     

Plate boundaries and evolution of the Solomon Sea region

The Solomon Sea Plate was widely developed during late Oligocene, separating the proto-West Melanesian Arc from the proto-Trobriand Arc. Spreading in the Bismarck Sea and in the Woodlark Basin resulted from interaction between the Pacific and Australian Plates, specifically from the collision of the proto-West Melanesian Arc with north New Guinea, which occurred after arc reversal. This model explains the extensive Miocene, Pliocene, and Quaternary volcanism of the Papua New Guinea mainland as it related to southward subduction of the Trobriand Trough. Our interpreted plate motions are concordant with the geological evidence onshore and also with complex tectonic features in the Solomon Sea Basin Region.     

Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

Joint Soviet-Turkish expedition in the Black Sea

The hydrological and hydrochemical structures of the upper 300 m water column of the Black Sea in autumn 1988 have been studied. Regularities in the distribution of the physico-chemical characteristics in the zone of interaction between aerobic and anaerobic waters as well as the topography of the H₂S zone boundary and its connection with a certain density gradient have been found.Translated by Mikhail M. Trufanov.     

Grain-size distribution of quartz and feldspar extracts and implications for flocculation processes

Quartz and feldspar extracts, obtained by chemical dissolution of the clay minerals, provide insight into the inorganic flocculation and mineralogical influences upon the texture of fine-grained glaciomarine deposits. Glacial comminution in higher latitudes explains the relatively high contents of quartz and feldspars. Quartz and feldspar are better sorted and were apparently less influenced by flocculation than were phyllosilicates, except for particles less than approximately 16 μm, which are poorly sorted due to their inclusion in flocs. The 16-μm boundary is suggested to be useful for approximately separating fines that are usually involved in flocculation and coarse silt and larger grains that are less influenced.