Intrusive processes at ocean ridges: Evidence from the sheeted dyke complex of Masirah, Oman

Masirah Island largely consists of a late Mesozoic ophiolite which includes extensive areas of near-vertical, ENE—WSW striking, sheeted dykes. Previously the possibility has been suggested of a correlation between the similarly-aged ophiolites of Masirah and the Semail Complex of the Oman Mts. However, the Masirah ENE–WSW trend contrasts with N—S dyke trends from the Wadi Jizi area of the Semail, possibly suggesting two unrelated spreading centres. The dykes pass up into a pillow lava—minor sediment sequence, down into both layered and unlayered gabbros and are bounded to the west by a major N—S mélange zone which may have originated as a ridge transform fault. Age relations of the dykes and the gabbros are complex: the dykes contain a variable proportion of gabbro screens representing earlier crystallization, but they are also intruded by several small gabbro bodies which are themselves cut by still later dykes. The lava and dyke—gabbro screen sequence shows evidence of metamorphism from zeolite to low amphibolite grade. This metamorphism was caused by ridge hydrothermal activity which appears to have been effective approximately to the lower levels of the dykes. The rapid passage from low-amphibolite dykes to fresh gabbro suggests lithological control of the metamorphism. A combination of structural, geochemical and mineral phase studies may indicate generation in a slow spreading ridge environment and near-ridge metamorphism caused by a geothermal gradient of approximately 200°C/km.     

A mass ratio limit for primordial black holes

We augment our scenario for the formation of astronomical objects from macroscopic superstrings by the assumption that the central matter keeps its identity in the fragmentation. From the condition that the angular momentum per mass squared of this matter should be less than the Kerr limit G/c, we obtain upper limits for the ratio of the mass of central black holes M(BH) to the mass M of the host object. This limit is M(BH)/M ≈ 0.001, and, expressed in observed quantities, approximately M(BH)/M ≈ σ²/(v · c) where σ is the r.m.s. velocity, v the rotational velocity and c the velocity of light. The valuesM(BH) agree with the observed behaviour both in order of magnitude and in the variation with velocity dispersion. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Observations of OH maser lines at an 18-cm wavelength in 9P/Temper1 and Lulin C/2007 N3 comets with RT-22 at the Crimean Astrophysical Observatory

Investigations on OH maser lines in comets have been performed with the RT-22 at CrAO. The results of observations of 9P/Temper1 and Lulin C/2007 N3 comets in the OH molecule line at a wavelength of 18 cm are presented. An original technique for observation data analysis has been developed. The gas production rate of OH molecules in these comets is estimated.     

Structural elements in southeastern Quebec,northwestern Appalachians,Canada

An attempt is made to correlate and separate in terms of style and time two contrasting sets of structural elements in the northwestern part of the Appalachian Uplands in the Province of Quebec, Canada. There is sufficient evidence to indicate that a fold system with north-south trending axes is superimposed on a fold system with east-west axes. It is suggested that the two sets of structures represent pulses of one long-continued deformation accompanied by corresponding early and late phases of metamorphism.

---

Zusammenfassung Es wurde versucht, in den Appalachen des südöstlichen Teiles der Provinz Quebec, Kanada, zwei ungleichzeitige tektonische Systeme verschiedenen Baustils zu trennen. Die komplexen Kleinstrukturen zeigen, da\ Ost-West streichende Faltenachsen von einer jüngeren Nord-Süd-Faltung überprägt worden sind. Der Autor ist der Meinung, da\ die zwei tektonischen Systeme, die von einer frühen und späten Phase der Metamorphose begleitet werden, den zeitlich getrennten Verformungsstadien einer Orogenese entsprechen.

     

The role of prior model calibration on predictions with ensemble Kalman filter

This paper, based on a real world case study (Limmat aquifer, Switzerland), compares inverse groundwater flow models calibrated with specified numbers of monitoring head locations. These models are updated in real time with the ensemble Kalman filter (EnKF) and the prediction improvement is assessed in relation to the amount of monitoring locations used for calibration and updating. The prediction errors of the models calibrated in transient state are smaller if the amount of monitoring locations used for the calibration is larger. For highly dynamic groundwater flow systems a transient calibration is recommended as a model calibrated in steady state can lead to worse results than a noncalibrated model with a well-chosen uniform conductivity. The model predictions can be improved further with the assimilation of new measurement data from on-line sensors with the EnKF. Within all the studied models the reduction of 1-day hydraulic head prediction error (in terms of mean absolute error [MAE]) with EnKF lies between 31% (assimilation of head data from 5 locations) and 72% (assimilation of head data from 85 locations). The largest prediction improvements are expected for models that were calibrated with only a limited amount of historical information. It is worthwhile to update the model even with few monitoring locations as it seems that the error reduction with EnKF decreases exponentially with the amount of monitoring locations used. These results prove the feasibility of data assimilation with EnKF also for a real world case and show that improved predictions of groundwater levels can be obtained.     

Rock salt mass in the Paleoproterozoic sequence of the Onega trough in Karelia (from the Onega parametric well data)

A thick (200 m) rock salt mass covering Late Archean granitoids was exposed for the first time in the Early Proterozoic volcanogenic-sedimentary formations in the Onega trough of the east Baltic Shield by the Onega parametric well. The mineral composition of salts, their geochemical features, and the isotopic composition of carbonate carbon and oxygen have been studied. After fluid inclusions present in salts, their metamorphism temperature and isotopic composition of helium and argon were determined. The obtained results give evidence of the fact that rock salts and magnesites associated with them were formed in an evaporate basin with participation of deep crustal processes. The age of the underlying granitoids (2.716 ± 9 Ma) is determined using the Pb—Pb method.     

Developing a modern pollen–climate calibration data set for Norway

Bjune, A. E., Birks, H. J. B., Peglar, S. M. & Odland, A. 2010: Developing a modern pollen–climate calibration data set for Norway. Boreas, Vol. 39, pp. 674–688. 10.1111/j.1502‐3885.2010.00158.x. ISSN 0300‐9483. Modern pollen–climate data sets consisting of modern pollen assemblages and modern climate data (mean July temperature and mean annual precipitation) have been developed for Norway based on 191 lakes and 321 lakes. The original 191‐lake data set was designed to optimize the distribution of the lakes sampled along the mean July temperature gradient, thereby fulfilling one of the most critical assumptions of weighted‐averaging regression and calibration and its relative, weighted‐averaging partial least‐squares regression. A further 130 surface samples of comparable taphonomy, taxonomic detail and analyst became available as a result of other projects. These 130 samples, all from new lakes, were added to the 191‐lake data set to create the 321‐lake data set. The collection and construction of these data sets are outlined. Numerical analyses involving generalized linear modelling, constrained ordination techniques, weighted‐averaging partial least‐squares regression, and two different cross‐validation procedures are used to asses the effects of increasing the size of the calibration data set from 191 to 321 lakes. The two data sets are used to reconstruct mean July temperature and mean annual precipitation for a Holocene site in northwest Norway and a Lateglacial site in west‐central Norway. Overall, little is to be gained by increasing the modern data set beyond about 200 lakes in terms of modern model performance statistics, but the down‐core reconstructions show less between‐sample variability and are thus potentially more plausible and realistic when based on the 321‐lake data set.     

The Karoo Basin of South Africa: type basin for the coal-bearing deposits of southern Africa

The coal-bearing sediments and coal seams of the Karoo Basin, Southern Africa are described and discussed. The Karoo Basin is bounded on its southern margin by the Cape Fold Belt, onlaps onto the Kaapvaal Craton in the north and is classified as a foreland basin. Coal seams are present within the Early Permian Vryheid Formation and the Triassic Molteno Formation.The peats of the Vryheid Formation accumulated within swamps in a cool temperate climatic regime. Lower and upper delta plain, back-barrier and fluvial environments were associated with peat formation. Thick, laterally extensive coal seams have preferentially accumulated in fluvial environments. The coals are in general inertinite-rich and high in ash. However, increasing vitrinite and decreasing ash contents within seams occur from west to east across the coalfields. The Triassic Molteno coal seams accumulated with aerially restricted swamps in fluvial environments. These Molteno coals are thin, laterally impersistent, vitrinite-rich and shaly, and formed under a warm temperate climatic regime.Palaeoclimate, depositional systems, differential subsidence and basin tectonics influence to varying degrees, the maceral content, thickness and lateral extent of coal seams. However, the geographic position of peat-forming swamps within a foreland basin, coupled with basin tectonics and differential subsidence are envisaged as the primary controls on coal parameters. The Permian coals are situated in proximal positions on the passive margin of the foreland basin. Here, subsidence was limited which enhanced oxidation of organic matter and hence the formation of inertinitic coals. The coals in this tectonic setting are thick and laterally extensive. The Triassci coals are situated within the tectonically active foreland basin margin. Rapid subsidence and sedimentation rates occurred during peat formation which resulted in the preservation of thin, laterally impersistent, high ash, vitrinite-rich, shaly coals.