Description and recognition of potassic-richterite,an amphibole supergroup mineral from the Pajsberg ore field,Värmland,Sweden

Mineralogy and Petrology - Potassic-richterite, ideally AKB(NaCa)CMg5TSi8O22W(OH)2, is recognized as a valid member of the amphibole supergroup (IMA-CNMNC 2017–102). Type material is from the...     

Dating of mine waste in lacustrine sediments using cesium-137

For over a century Medicine Lake in northern Idaho has received heavy-metal-laden tailings from the Coeur d'Alene mining district. Establishing the depositional chronology of the lake bottom sediments provides information on the source and rate of deposition of the tailings. Cesium-137, an isotope produced in the atmosphere by nuclear bomb tests, was virtually absent in the environment prior to 1951, but reached its apex in 1964. Our analysis of cesium-137 in the sediments of Medicine Lake revealed that 14 cm of fine-grained tailings were deposited in the lake from 1951 to 1964 and tailing deposition downstream was greatly reduced by the installation of tailings dams in the district in 1968. Cesium-137 analysis is accomplished by a fairly simple gamma-ray counting technique and should be a valuable tool for analyzing sedimentation in any lacustrine environment that was active during the 1950s and 1960s.     

Lapis lazuli from Baffin island — a precambrian meta-evaporite

On Baffin Island, the major minerals in lapis lazuli are calcite, lazurite, diopside, nepheline and phlogopite in the Main Occurrence and calcite, lazurite, diopside, plagioclase and scapolite in the North Occurrence. The abundances of Na, K, S, Cl, Br, F and Fe, the well-developed layering parallel to the regional foliation, and the scarcity of intrusive rocks, support the hypothesis that the deposit evolved from an evaporite parent during regional metamorphism. After sedimentation, considerable reduction of sulfur was effected by CO, perhaps aided by H₂, Cl^? and anaerobic bacteria. Chemographic analysis suggests that the observed phase assemblages represent local equilibrium within small volumes, where SiO₂-Al₂O₃-MgO-Na₂O-K₂O behaved as inert components at the peak of metamorphism. The lack of systematic zoning of phase assemblages, and the uniformity of mineral compositions within the deposit, also argue against a metasomatic origin. Most phases equilibrated at or near the peak of metamorphism (granulite facies).     

Spatial distribution of block falls using volumetric GIS–decision-tree models

Block falls are considered a significant aspect of surficial instability contributing to losses in land and socio-economic aspects through their damaging effects to natural and human environments. This paper predicts and maps the geographic distribution and volumes of block falls in central Lebanon using remote sensing, geographic information systems (GIS) and decision-tree modeling (un-pruned and pruned trees). Eleven terrain parameters (lithology, proximity to fault line, karst type, soil type, distance to drainage line, elevation, slope gradient, slope aspect, slope curvature, land cover/use, and proximity to roads) were generated to statistically explain the occurrence of block falls. The latter were discriminated using SPOT4 satellite imageries, and their dimensions were determined during field surveys. The un-pruned tree model based on all considered parameters explained 86% of the variability in field block fall measurements. Once pruned, it classifies 50% in block falls’ volumes by selecting just four parameters (lithology, slope gradient, soil type, and land cover/use). Both tree models (un-pruned and pruned) were converted to quantitative 1:50,000 block falls’ maps with different classes; starting from Nil (no block falls) to more than 4000 m³. These maps are fairly matching with coincidence value equal to 45%; however, both can be used to prioritize the choice of specific zones for further measurement and modeling, as well as for land-use management. The proposed tree models are relatively simple, and may also be applied to other areas (i.e. the choice of un-pruned or pruned model is related to the availability of terrain parameters in a given area).     

Discovery of Precambrian rocks in New Zealand: Age relations of the Greenland Group and Constant Gneiss,West Coast,South Island

Rb-Sr whole-rock analyses yield a Cambro-Ordovician (495 ± 11 m.y.) sedimentation age for the supposed Precambrian Greenland Group and a late Precambrian age, 680 ± 21 m.y., for parts of the Constant Gneiss, the first confirmation of Precambrian rocks in New Zealand. A Precambrian age for the Greenland Group is thus unlikely and the large area of Upper Cambrian-Lower Ordovician rocks now established can be considered as a lateral equivalent of the fossiliferous Lower Palaeozoic succession of northwest Nelson to the east. The Greenland Group, especially in the Paparoa Range has been affected subsequently by a thermal metamorphic overprint about 360 m.y. ago during the Tuhuan Orogeny. Although the Constant Gneiss must form the local basement to the Greenland Group in north Westland, the former does not appear to be the source of the sediments and the true provenance must lie elsewhere.     

A correlation between slope failures and accelerometric parameters: the 26 September 1997 earthquake (Umbria–Marche, Italy)

After the occurrence of the 26 September 1997 earthquake in Umbria–Marche an extensive survey was performed to individuate surface effects induced by the ground motion. Several types of effects occurred on bedrock, calcareous debris and sandy-clay deposits. Shallow soil slides and dry debris slides were mapped by field survey and aerial photograph interpretation in the epicentral area close to Nocera Umbra. This gave the opportunity for testing the prediction maps that can be obtained with the use of empirical laws, proposed by several authors, based on a simple method (Geotechnique 15(2) (1965) 139). Accelerometric records from the permanent and mobile seismic network of the Seismic Survey of Italy have been processed and interpolated to obtain strong ground motion parameters at each site, e.g. Peak Ground Acceleration, Spectral Intensity, Arias Intensity, etc. The different predictions have been tested with the real landslide data to verify their performances. Some of the proposed methods explain quite well the behaviour of slopes during the application of a time history and can therefore be employed for future landslide hazard zonation.     

An investigation of the controls on Irish precipitation δ18O values on monthly and event timescales

This two-year study investigates the relative influence of meteorological variables (precipitation amount and temperature), atmospheric circulation, air mass history, and moisture source region on Irish precipitation oxygen isotopes (δ¹⁸O_p) on event and monthly timescales. Single predictor correlations reveal that on the event scale, 20% of δ¹⁸O_p variability is attributable to the amount effect and 7% to the temperature effect while on the monthly timescale the North Atlantic Oscillation accounts for up to 20% of δ¹⁸O_p variability and the amount and temperature effects are not significant. In comparison, multivariate linear regression reveals that the interaction of temperature and precipitation amount explains up to 40% of δ¹⁸O_p variance at event and monthly timescales. Five-day kinematic back trajectories suggest that the amount-weighted mean δ¹⁸O_p value of southerly- and northerly-derived events are lower by 2‰ relative to events derived from the west. Because air mass history and atmospheric circulation appear to influence δ¹⁸O_p in Ireland, Irish paleo-δ¹⁸O_p proxy records are best interpreted as reflecting a combination of parameters, not just paleotemperature or paleorainfall.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Magma yield stress and permeability: Insights from multiphase percolation theory

Magmas often contain multiple interacting phases of embedded solid and gas inclusions. Multiphase percolation theory provides a means of modeling assemblies of these different classes of magmatic inclusions in a simple, yet powerful way. Like its single phase counterpart, multiphase percolation theory describes the connectivity of discrete inclusion assemblies as a function of phase topology. In addition, multiphase percolation employs basic laws to distinguish separate classes of objects and is characterized by its dependency on the order in which the different phases appear. This paper examines two applications of multiphase percolation theory: the first considers how the presence of bubble inclusions influences yield stress onset and growth in a magma's crystal network; the second examines the effect of bi-modal bubble-size distributions on magma permeability. We find that the presence of bubbles induces crystal clustering, thereby 1) reducing the percolation threshold, or critical crystal volume fraction, ?_c, at which the crystals form a space-spanning network providing a minimum yield stress, and 2) resulting in a larger yield stress for a given crystal volume fraction above ?_c. This increase in the yield stress of the crystal network may also occur when crystal clusters are formed due to processes other than bubble formation, such as heterogeneous crystallization, synneusis, and heterogeneity due to deformation or flow. Further, we find that bimodal bubble size distributions can significantly affect the permeability of the system beyond the percolation threshold. This study thus demonstrates that larger-scale structures and topologies, as well as the order in which different phases appear, can have significant effects on macroscopic properties in multiphase materials.