Theoretical aspects of cap-rock and fault seals for single- and two-phase hydrocarbon columns

Cap-rock seals can be divided genetically into those that fail by capillary leakage (membrane seals) and those whose capillary entry pressures are so high that seal failure preferentially occurs by fracturing and/or wedging open of faults (hydraulic seals). A given membrane seal can trap a larger oil column than gas column at shallow depths, but below a critical depth (interval), gas is more easily sealed than oil. This critical depth increases with lower API gravity, lower oil GOR and overpressured conditions (for the gas phase). These observations arise from a series of modelling studies of membrane sealing and can be conveniently represented using pressure/ depth (P/D) profiles through sealed hydrocarbon columns. P/D diagrams have been applied to the more complex situation of the membrane sealing of a gas cap underlain by an oil rim; at seal capacity, such a two-phase column will be always greater than if only oil or gas occurs below the seal.These conclusions contrast with those for hydraulic seals where the seal capacity to oil always exceeds that for gas. Moreover, a trapped two-phase column, at hydraulic seal capacity will be less than the maximum-allowed oil-only column, but more than the maximum gas-only column. Unlike membrane seals, hydraulic seal capacity should be directly related to cap-rock thickness, in addition to the magnitude of the minimum effective stress in the sealing layer and the degree of overpressure development in the sequence as a whole.Fault-related seals are effectively analogous to membrane cap-rocks which have been tilted to the angle of the fault plane. Consequently, all of the above conclusions derived for membrane cap-rocks apply to both sealing faults sensu stricto (fault plane itself seals) and juxtaposition faults (hydrocarbon trapped laterally against a juxtaposed sealing unit). The maximum-allowed two-phase column trapped by a sealing fault is greater than for equivalent oil-only and gas-only columns, but less than that predicted for a horizontal membrane cap-rock under similar conditions. Where a two-phase column is present on both sides of a sealing fault (which is at two-phase seal capacity), a deeper oil/water contact (OWC) in one fault block is associated with a deeper gas/oil contact (GOC) compared with the adjacent fault block. If the fault seal is discontinuous in the gas leg, however, the deeper OWC is accompanied by a shallower GOC, whereas a break in the fault seal in the oil leg results in a common OWC in both fault blocks, even though separate GOC's exist. Schematic P/D profiles are provided for each of the above situations from which a series of fundamental equations governing single- and two-phase cap-rock and fault seal capacities can be derived. These relationships may have significant implications for exploration prospect appraisal exercises where more meaningful estimates of differential seal capacities can be made.The membrane sealing theory developed herein assumes that all reservoirs and seals are water-wet and no hydrodynamic flow exists. The conclusions on membrane seal capacity place constraints on the migration efficiency of gas along low-permeabiligy paths at depth where fracturing, wedging open of faults and/or diffusion process may be more important. Contrary to previous assertions, it is speculated that leakage of hydrocarbons through membrane seals occurs in distinct pulses such that the seal is at or near the theoretically calculated seal capacity, once this has been initially attained.Finally, the developed seal theory and P/D profile concepts are applied to a series of development geological problems including the effects of differential depletion, and degree of aquifer support, on sealing fault leakage, and the evaluation of barriers to vertical cross-flow using RFT profiles through depleted reservoirs. It is shown that imbibition processes and dynamic effects related to active cross-flow across such barriers often preclude quantitative analysis and solution of these problems for which simulation studies are usually required.     

Joint Soviet-Turkish expedition in the Black Sea

The hydrological and hydrochemical structures of the upper 300 m water column of the Black Sea in autumn 1988 have been studied. Regularities in the distribution of the physico-chemical characteristics in the zone of interaction between aerobic and anaerobic waters as well as the topography of the H₂S zone boundary and its connection with a certain density gradient have been found.Translated by Mikhail M. Trufanov.     

Grain-size distribution of quartz and feldspar extracts and implications for flocculation processes

Quartz and feldspar extracts, obtained by chemical dissolution of the clay minerals, provide insight into the inorganic flocculation and mineralogical influences upon the texture of fine-grained glaciomarine deposits. Glacial comminution in higher latitudes explains the relatively high contents of quartz and feldspars. Quartz and feldspar are better sorted and were apparently less influenced by flocculation than were phyllosilicates, except for particles less than approximately 16 μm, which are poorly sorted due to their inclusion in flocs. The 16-μm boundary is suggested to be useful for approximately separating fines that are usually involved in flocculation and coarse silt and larger grains that are less influenced.     

Seasonal course of theT,S-characteristics in the north-eastern Tropical Atlantic

The problem of the seasonal variations of temperature and salinity in the intermediate zone located between the West African and the Gulf of Guinea upwellings is considered. The vertical distribution of the phase-amplitude characteristics of the annual and semi-annual variations is examined in good detail and their parameters are defined from the monthly means using the least-squares fit technique. The contribution of isopycnic advection to the formation of seasonal thermohaline variations is studied.Translated by Vladimir A. Puchkin.     

Bioavailability: the organism as sensor

The use of a system of continuous culture of phytoplankton at constant population density, the ‘cage-culture’ turbidostat, as a monitor of the bioavailability of pollutant materials, is illustrated. In the case of proposed dredge spoils from two polluted areas, it is shown that bulk analyses for scheduled materials cannot be equated with bioavailability. Monitoring for the effect of the whole pollutant mixture on a properly chosen test population could obviate the necessity for chemical analyses for each component.     

Interference fringes on GLORIA side-scan sonar images from the Bering Sea and their implications

GLORIA side-scan sonographs from the Bering Sea Basin show a complex pattern of interference fringes sub-parallel to the ship's track. Surveys along the same trackline made in 1986 and 1987 show nearly identical patterns. It is concluded from this that the interference patterns are caused by features in the shallow subsurface rather than in the water column. The fringes are interpreted as a thin-layer interference effect that occurs when some of the sound reaching the seafloor passes through it and is reflected off a subsurface layer. The backscattered sound interferes (constructively or desctructively) with the reflected sound. Constructive/destructive interference occurs when the difference in the length of the two soundpaths is a whole/half multiple of GLORIA's 25 cm wavelength. Thus as range from the ship increases, sound moves in and out of phase causing bands of greater and lesser intensity on the GLORIA sonograph. Fluctuations (or wiggles) of the fringes on the GLORIA sonographs relate to changes in layer thickness. In principle, a simple three dimensional image of the subsurface layer may be obtained using GLORIA and bathymetric data from adjacent (parallel) ship's tracks. These patterns have also been identified in images from two other systems; SeaMARC II (12 kHz) long-range sonar, and TOBI (30 kHz) deep-towed sonar. In these, and other cases world-wide, the fringes do not appear with the same persistence as those seen in the Bering Sea.     

The behaviour of a Cu(II) ion selective electrode in seawater; copper consumption capacity and copper determinations

Determinations of copper consumption capacity (CuCs.C) and labile copper concentrations in surface coastal seawater, using a copper ion selective electrode (Cu-ISE) potentiometric method under predominantly diffusive conditions, are reported. For evaluation of the copper concentrations, the points of the endpoint contiguity zone of the CuCs.C titration curve were treated by an ISE multiple standard addition technique. The results were compared with those obtained by means of a Chelex-100 (calcic form) ‘batch’ procedure-potentiometric stripping analysis.The labile copper of the sample was determined at concentrations down to 10.70 nM with an average RSD of 12%, independent of the Cu-ISE employed. For adjacent subsamples, the mean CuCs.C values obtained for El Way seawater were equivalent to 81.05 and 48.00 nM copper, with an RSD of 4 and 7%, and for Isla Santa Maria seawater the value was equivalent to 70.27 nM copper, with an RSD of 7%. The theoretical approach of the electrode diffusive mechanism proposed, which would depend, fundamentally, on the adsorptive, complexing and reducing properties of the dissolved organic matter in the seawater sample, allows simultaneous analytical determination of CuCs.C and labile copper concentration in seawater.     

Paleoclimatic changes in southern Africa during the intensification of Northern Hemisphere glaciation: evidence from ODP Leg 175 Site 1085

Pliocene age sediments from Ocean Drilling Program Leg 175, Site 1085-A and B in the Cape Basin were analyzed to investigate the impact of the intensification of Northern Hemisphere glaciation (INHG) on the South Atlantic Benguela Current system from 4 to 2 Ma. Proxies for productivity (concentrations and mass accumulation rates of total organic carbon, carbon to nitrogen ratios, percent calcium carbonate, and percent biogenic silica) as well as weight percent sand (a proxy for preservation or winnowing) peak at 3.2, 3.0, 2.4, and 2.25 Ma. Normative calculations of allied trace and major elemental determinations indicate synchronous increases in productivity peaks, as well as high concentrations and accumulations of terrigenous sediments. Coeval increases in hemipelagic sedimentation and productivity indicators could be the result of enhanced eolian sedimentation resulting from strengthened winds, leading to elevated rates of upwelling and enhanced productivity. However, rapid burial, as indicated by high sedimentation rates, could also enhance preservation. The very high concentrations (>30%) and accumulations (up to 60 g/cm²/kyr) limit the likelihood that eolian sedimentation was the only transport mechanism, invoking an additional fluvial source. Rapid burial by either eolian or fluvial transport links these intervals of enhanced preservation and productivity with continental climate changes resulting from (1) increased winds and/or dust availability due to higher aridity in the Namibia/northern South Africa region; (2) lowered sea-level related to increased ice volume; (3) increased sediment load due to wetter conditions in the continental interior; or (4) some combination. Peaks at 3.2, 2.4 and 2.25 Ma are coincident with maximum precession, suggesting a link between hemipelagic sedimentation and enhanced monsoonal circulation over southern Africa. The Site 1085 sedimentary record during the INHG seems to be controlled by low-latitude processes linked to precession rather than hig-latitude processes.     

Forced Waves in a Bounded Basin with One Thermocline

Within the framework of the linear theory taking into account the action of the Coriolis force, we study waves induced in a continuously stratified fluid with one thermocline by periodic variations of pressure on the free surface. The fluid fills a bounded basin of constant depth. We establish the dependences of the wave amplitudes and wave velocities on the period of disturbing pressure. The sequence of transformations of generated waves from the barotropic character of motion to baroclinic depending on changes in the period of disturbing pressure is studied in detail.