Dynamic properties of planar,coupled shear walls

The paper is a study of the natural frequencies and mode shapes of planar, coupled shear walls, a common lateral resistive element in building construction. The equations of motion are derived for the general case, and the eigenvalue problem associated with free vibrations of equal, constant shear walls is solved, both with and without the inclusion of the inertia of vertical motion. Explicit solutions are presented for the characteristic equation and the mode shapes and the results are illustrated with figures, including an example calculation based on the shear walls of the Mt. McKinley Building, damaged by the Alaskan earthquake of 1964. The results affirm the necessity of including vertical displacement of the shear walls in the analysis of such systems, and suggest that the inertia of vertical motion also must be considered in the analysis for certain ranges of the parameters.     

The Amoco Cadiz oil spill—At a glance

The tanker Amoco Cadiz grounded close to Aber Wrac'h in Brittany, France, on March 1978. Graphs are presented, showing the fate of the oil, the recovery of the biota and the social impacts after the grounding. Visual insepction in 1983 showed that there are still nuisance amounts of oil, and the biotic recovery is far from being complete with respect to species distribution.     

Snow research in Svalbard–an overview

This paper summarizes the most significant snow-related research that has been conducted in Svalbard. Most of the research has been performed during the 1990s and includes investigations of snow distribution, snow-melt, snow pack characteristics, remote sensing of snow and biological studies where snow conditions play an important role. For example, studies have shown regional trends with about 50% higher amounts of snow accumulation at the east coast of Spitsbergen compared to the west coast. Further, the accumulation rates are about twice as high in the south compared to the north. On average, the increase in accumulation with elevation is 97 mm water equivalents per 100 m increase in elevation. Several researchers reported melt rates, which are primarily driven by incoming short-wave radiation, in the range of 10-20 mm/day during spring. Maximum melt rates close to 70 mm/day have been measured. In addition to presenting an overview of research activities, we discuss new, unpublished results in areas where considerable progress is being made. These are i) modelling of snow distribution, ii) modelling of snowmelt runoff and iii) monitoring of snow coverage by satellite imagery. We also identify some weaknesses in current research activities. They are lacks of i) integration between various studies, ii) comparative studies with other Arctic regions, iii) applying local field studies in models that can be used to study larger areas of Svalbard and, finally, iv) using satellite remote sensing data for operational monitoring purposes.     

Microfabric and rock properties of experimentally compressed silt-clay mixtures

Oedometric mechanical compaction tests were performed on brine-saturated synthetic samples consisting of silt-clay mixtures to study changes in microfabric and rock properties as a function of effective stress. The silt consisted of crushed quartz (∼100%) with grain size range between 4 and 40 μm, whereas the clay consisted of 81% kaolinite, 14% mica/illite and 5% microcline of grain size between 0.4 and 30 μm. Five sample pairs ranging in composition from pure silt to pure clay were compacted to 5 and 50 MPa effective stress respectively. SEM studies were carried out to investigate microfabric changes in the mechanically compacted silt-clay mixtures. The degree of alignment of the different minerals present (quartz, mica/illite and kaolinite) were computed by using an image analysis software. Experimental compaction have measured the changes in the rock properties such as porosity and velocity as a function of effective stress for different mixtures of clay and silt. Clay-rich samples showed a higher degree of mineral orientation and lower porosity compared to silt-dominated samples as a function of effective stress. Pure clay sample had 11% porosity at 50 MPa effective stress whereas the pure silt sample retained about 29% porosity at the same effective stress. The experiments showed that low porosity down to 11% is possible by mechanical compaction only. A systematic increase in strain was observed in the silt-clay mixtures with increasing clay content but the porosity values found for the 50:50 silt-clay mixture were lower than that of 25:75 silt-clay mixture. No preferential mineral orientation is expected before compaction owing to the high initial porosity suggesting that the final fabric is a direct result of the effective stress. Both P- and S-wave velocities increased in all silt-clay mixtures with increasing effective stress. The maximum P- and S-wave velocities were observed in the 25:75 silt-clay mixture whereas the minimum Vp and Vs were recorded in the pure silt mixture. At 50 MPa effective stress P- wave velocities as high as 3 km/s resulted from experimental mechanical compaction alone. The results show that fine-grained sediment porosity and velocity are dependent on microfabric, which in turn is a function of grain size distribution, particle shape, sediment composition and stress. At 5 MPa effective stress, quartz orientation increased as a function of the amount of clay indicating that clay facilitate rotation of angular quartz grains. Adding clay from 25% to 75% in the silt-clay mixtures at 50 MPa effective stress decreased the quartz alignment. The clay mineral orientation increased by increasing both the amount of clay and the effective stress, the mica/illite fabric alignment being systematically higher than that of kaolinite. Even small amount of silt (25%) added to pure clay reduced the degree of clay alignment significantly. This study demonstrates that experimental compaction of well characterized synthetic mudstones can be a useful tool to understand microfabric and rock properties of shallow natural mudstones where mechanical compaction is the dominant process.     

Role of effective permeability distribution in estimating overpressure using basin modelling

Overpressure generation is a function of the rates of sedimentation, compaction, fluid generation from kerogen and dehydration of minerals, and most importantly the lateral distribution of permeability within a basin as this controls lateral drainage. Sedimentary basins, however, are typically highly heterogeneous with respect to primary sedimentary facies, diagenesis and tectonic development. While fluid flow models based on idealised homogeneous basins may further our understanding of the processes that influence overpressure development, the results are very sensitive to the distribution of rock properties, particularly permeability. The absolute permeability of sedimentary rocks varies from more than 1 Darcy to less than 0.01 nanodarcy (nD) (10⁻¹¹ Darcy).     

Anchor ice formation in streams: a field study

In northern steep streams anchor ice is commonly observed during winter, and plays a key role when considering in‐stream conditions. The understanding, however, of the nature of anchor ice formation is less understood, in particular, under natural conditions. In the following, observations of anchor ice formation in three stream environments with different physical characteristics are presented. Results demonstrate that anchor ice not only form in riffle areas, but also in shallow and slow running stream sections. No linkage between spatial distribution of anchor ice and calculated dimensionless numbers (Froude and Reynolds number) was found. Furthermore, analyses on growth and density showed that anchor ice may be distinguished by two main types. (1) Type I: Lower density forming on top of substrata. (2) Type II: Higher density forming between the substrata filling interstitial spaces. Distribution of anchor ice Types I and II suggests a relation between intensity of turbulence expressed by the Reynolds number, growth pattern and density. As anchor ice has both physical and biological implications on in‐stream environments, findings from the present study may be of particular interest to cold region freshwater stream management. Copyright © 2009 John Wiley & Sons, Ltd.     

The role of shallow convection in the water and energy cycles of the atmosphere

The Canadian Centre for Climate Modelling and Analysis atmospheric general circulation model (AGCM4) is used to study the role of shallow convection in the hydrologic and energy cycles of the atmosphere. Sensitivity tests with AGCM4 show a marked effect of the parameterization of shallow convection in the model. In particular, including the parameterization of shallow convection produces considerably enhanced vertical mixing and decreased stratiform cloud amounts in the lower subtropical atmosphere over the oceans. The differences in simulated stratiform cloud amounts are associated with a change in the globally averaged outgoing shortwave radiative flux at the top of the atmosphere of about 11 W m⁻². Additionally, precipitation rates are considerably reduced for stratiform clouds and enhanced for convective clouds in the subtropics, if the parameterization of shallow convection is included in the model. Additional tests show that the simulated responses in cloud amounts and precipitation to the treatment of shallow convection are robust. Additional simulations with modified closures for deep convection and other changes to the treatment of convection in the model still lead to similar responses of the model results.     

Correlation of late precambrian and early Palaeozoic sequences by eustatic sea-level changes and the selection of the Precambrian-Cambrian boundary

The author argues for a pragmatic approach to the problem of defining the Precambrian-Cambrian boundary. A boundary at first occurrence of shelly fauna as recommended by the Precambrian-Cambrian working group will create severe difficulties in worldwide correlation. By placing the boundary stratigraphically somewhat higher (i.e. the Fallotaspis zone) with a more abundant fauna, there is a much better basis for biostratigraphic correlation.Eustatic sea-level changes may be another important tool for late Precambrian-early Palaeozoic correlation, and more detailed facies interpretation of such sequences should be carried out in order to recognise these eustatic sea-level changes.