Polycyclic aromatic hydrocarbons from rural household biomass burning in a typical Chinese village

Biomass energy sources are still popular in the rural areas of developing countries for cooking and space heating. Since the incomplete combustion of agricultural residues in home-made ranges might lead to both outdoor and indoor air pollution and cause potential health threat to the rural population, we monitored the ambient levels of 16 US EPA priority polycyclic aromatic hydrocarbons (PAHs) at a typical rural site. Ambient particulate PAH samples (PM2.5 and PM10) were taken during both cooking and non-cooking periods. Source emission monitoring was also conducted for both improved and tra- ditional cooking stoves used in the area. Ambient PAHs had a significant increase during the cooking periods and varied from 72.1 to 554.4 ng/m3. The highest total PAH levels were found during the supper cooking time, in which five- and six-ring species accounted for a large proportion. The observed PAH levels during cooking periods at this rural site were even higher than those in urban areas. A good correlation was found between the benzo[a]pyrene level and the total PAH concentration (r=0.98), making benzo[a]pyrene a potential molecular marker for PAH pollution in the rural areas, where bio- mass burning is typical. The profiles of the particulate PAHs in both ambient air and source emissions showed a high proportion of high molecular-mass PAHs. In addition, emission factors of 16 PAHs from an improved household stove were found to be significantly lower than those from traditional stoves used in China and in other Asian countries.     

Slug test analysis to evaluate permeability of compressible materials

The line-fitting methods such as the Hvorslev method and the Bouwer and Rice method provide a rapid and simple means to analyze slug test data for estimating in situ hydraulic conductivity ( k ) of geologic materials. However, when analyzing a slug test in a relatively compressible geologic formation, these conventional methods may have difficulties fitting a straight line to the semilogarithmic plot of the test data. Data from relatively compressible geologic formations frequently show a concave-upward curvature because of the effect of the compressibility or specific storage ( S _s). To take into account the compressibility of geologic formations, a modified line-fitting method is introduced, which expands on Chirlin's (1989) approach to the case of a partially penetrating well with the basic-time-lag fitting method. A case study for a compressible till is made to verify the proposed method by comparing the results from the proposed methods with those obtained using a type-curve method (Kansas Geological Survey method [ Hyder et al. 1994 ]).     

Velocity model estimation for depth imaging: Comparison of three tomography methods on a 2D real data set

The estimation of velocity models is still crucial in seismic reflection imaging as it controls the quality of the depth‐migrated image, which is the basis of geological interpretation. Among the numerous existing methods for velocity determination, tomographic methods are very attractive for their efficiency and ability to retrieve heterogeneities of the medium. We present three tomographic methods in order to estimate heterogeneous velocity models from 2D prestack PP reflection data: a traveltime tomography in the time‐migrated domain, a traveltime and slope tomography in the non‐migrated time domain, and a slope tomography in the depth‐migrated domain. The first method (traveltime tomography in the time domain) is based on continuous picked events, whereas the two slope tomographic methods, one in the time domain and the other in the depth domain, are based on locally coherent events, with no assumptions about reflector geometry or the unknown velocity field. The purpose of this paper is not to describe in detail the theoretical basis and implementation of the methods, but to apply and compare their output using the same marine real data set. Based on the estimated velocity models, the migrated images and the common‐image gathers from the three processing routes, the relative strengths and weaknesses of the methods are discussed. Finally, similarities are indicated and potential alternative approaches are proposed.     

Correlating mass physical properties with ALOS reflectance spectra for intertidal sediments from the Ba Lat Estuary (northern Vietnam): an exploratory laboratory study

Characterization of the sediment composition of tidal flats and monitoring of their spatiotemporal changes has become an important part of the sustainable management of coastal environments. To accurately classify sediments through remote sensing, a comprehensive understanding of sediment reflectance spectra is indispensable. The present laboratory-based study explores the performance of the high spatial resolution (10?×?10 m) Advanced Land Observing Satellite (ALOS) launched in 2006. Relationships between reflectance spectra (bands 1 to 4) and four typical mass physical properties were investigated under wet and dry experimental conditions for intertidal sediments sampled near the Ba Lat Estuary in northern Vietnam. Reflectance in the near-infrared region corresponding to ALOS band 4 (0.76–0.89 μm) was found (1) to have a strong negative correlation with sand content (dry wt%) under both wet and dry conditions (linear correlation coefficient r?=?–0.7859 and –0.8094, respectively), (2) to increase with decreasing relative water content (%) in a given sediment type (r?=?–0.7748 to –0.9367 for mud, sandy mud, muddy sand, and sand), (3) to have a positive correlation with organic matter content (r?=?0.7610 and 0.6460 under wet and dry conditions for contents >0.20 dry wt%), and (4) to be insignificantly correlated with mineral composition assessed in terms of contents (wt%) of quartz, clay minerals, and mica group minerals. Positive relationships between reflectance and water content for the pooled data of all sediment types (r?=?0.6395) or organic matter content contrast with previous findings, and can be attributed to close interrelationships between these properties and the predominance of sand content as controlling factor of reflectance. This study clarifies that ALOS band 4 provides the most useful imagery for intertidal monitoring because its reflectance, as simulated using the laboratory data, shows the strongest correlation with sand content. In a next step, these experimental findings should be verified by identifying the reflectance relationships at satellite image scales, and also considering the effects of other tidal flat features on reflectance, such as microtopography and biological surface characteristics.     

Sea urchin development in a global change hotspot, potential for southerly migration of thermotolerant propagules

The distribution of the sea urchin Heliocidaris erythrogramma coincides with the southeast Australia global change hot spot where marine ecosystems are warming significantly due to changes in ocean circulation. To address questions on future vulnerabilities, the thermotolerance of the planktonic life phase of H. erythrogramma was investigated in the climate and regionally relevant setting of projected near-future (2100) ocean warming. Experimental treatments ranged from 18 to 26 °C, with 26 °C representing +3-4 °C above recent ambient sea-surface temperatures. Developmental success across all stages (gastrula, 24 h; larva, 72 h; juvenile, 120 h) decreased with increasing temperature. Development was tolerant to a +1-2 °C increase above ambient, but significant deleterious effects were evident at +3-4 °C. However, larvae that developed through the early bottleneck of normal development at 26 °C metamorphosed successfully. The inverse relationship between temperature and planktonic larval duration (PLD) was seen in a 25% decrease in the PLD of H. erythrogramma at 24 and 26^oC. Ocean warming may be advantageous to a subset of larvae through early settlement and reduction of the vulnerable planktonic period. This positive effect of temperature may help buffer the negative effects of ocean warming. In parallel studies with progeny derived from northern (Coffs Harbour) and southern (Sydney) H. erythrogramma, northern embryos had significantly higher thermotolerance. This provides the possibility that H. erythrogramma populations might keep up with a warming world through poleward migration of thermotolerant propagules, facilitated by the strong southward flow of the East Australian Current. It is uncertain whether H. erythrogramma populations at the northern range of this species, with no source of immigrants, will have the capacity to persist in a warm ocean. Due to its extensive latitudinal distribution, its potential developmental thermotolerance and independence of its lecithotrophic larvae from exogenous food and the need to make a functional skeleton, H. erythrogramma may be particularly robust to ocean change.     

Influence of Tropical Cyclones of the South China Sea on the Variability of the Vietnamese Coastal Current Structure

The state of the natural environment of the marginal seas of the Northwest Pacific is largely controlled by the interaction of the atmospheric and hydrophysical processes. Tropical cyclones (typhoons), originating in the tropical zone of the Northwest Pacific and over the South China Sea basin, occupy a special place among atmospheric processes. The main destructive impact of typhoons falls on Southeast Asia. However, a significant number of are moving to the Russian Far East. The region of the South China Sea plays a significant role in the formation of tropical cyclones. This determines the importance of studying hydrometeorological processes not only in the Far East, but also in the South China Sea, and the need for cooperation between Vietnamese and Russian scientists. The main hydrodynamic structure of the western South China Sea is the Vietnamese Coastal Current (Western Boundary current), which depends not only on the seasonal monsoons but also on typhoons. The paper presents the results of joint Russian–Vietnamese studies of the dependence of the vertical structure of the Vietnamese Coastal Current on the Pacific tropical cyclones that form in the South China Sea. The study is done with numerical modeling. The period from April to June 1999 was used for modeling, provided with the necessary field data. The simulation results showed that, in general, the structure of water masses depends on the trajectories of tropical cyclones. In all cases considered, the Vietnamese Coastal Current is not a single flow, but represents a zone of eddy structures of different directions. An exception is the only situation in the condition of a tropical cyclone in the central region of the South China Sea when this current acquired the form of a single continuous flow directed from north to south only in the 200-m layer. The general patterns of changes in the dynamic structure of the Vietnamese Coastal Current for all the considered tropical cyclone trajectories include the following: areas with water transport in the northern direction prevail on the surface, while the rest of the water mass continues to flow generally in the southern direction. This transport of surface waters may be due to the influence of the emerging summer monsoon, and the rest of the water mass, which is less exposed to the still weak atmospheric processes of the monsoon type, continues to flow in the winter regime.

     

Effects of perforated baffle on reducing sloshing in rectangular tank: Experimental and numerical study

A liquid sloshing experimental rig driven by a wave-maker is designed and built to study liquid sloshing problems in a rectangular liquid tank with perforated baffle. A series of experiments are conducted in this experimental rig to estimate the free surface fluctuation and pressure distribution by changing external excitation frequency of the shaking table. An in-house CFD code is also used in this study to simulate the liquid sloshing in three-dimensional （3D） rectangular tank with perforated baffle. Good agreements of free surface elevation and pressure between the numerical results and the experimental data are obtained and presented. Spectral analysis of the time history of free surface elevation is conducted by using the fast Fourier transformation.     

Estimating Ore Production in Open-pit Mines Using Various Machine Learning Algorithms Based on a Truck-Haulage System and Support of Internet of Things

Natural Resources Research - This study aimed to develop and assess the feasibility of different machine learning algorithms for predicting ore production in open-pit mines based on a truck-haulage...     

Predicting Blast-Induced Air Overpressure: A Robust Artificial Intelligence System Based on Artificial Neural Networks and Random Forest

Natural Resources Research - Blasting is the most popular method for rock fragmentation in open-pit mines. However, the side effects caused by blasting operations include ground vibration, air...