Numerical calculation of free-surface potential flow around a ship using the modified Rankine source panel method

A modified Rankine source panel method is presented for solving a linearized free-surface flow problem with respect to the double-body potential. The method of solution is based on the distribution of Rankine sources on the hull as well as its image and on the free surface. An iterative algorithm is used for determining the free surface and wave resistance using upstream finite difference operator. A verification of numerical modeling is made using the Wigley hull and the validity of the computer program is examined by comparing the details of wave profiles and wave making resistance with Series 60 model.     

Discrimination of spurious self-correlation in nondimensionalized analyses of fluid dynamical data

Nondimensionalization of variables enables us to treat experiment data much more simply and efficiently by decreasing the number of variables. In some cases, trivial conclusions (which Kenney, 1982, called spurious self-correlation) result from a formal application of dimensional analyses. In contrast, in some cases fully significant conclusions can be derived. We first discuss how to construct nondimensional variables retaining the physical meanings of variables. We then propose simple and efficient methods, especially the use of “spurious triangle (SpT)”, to discriminate between significant conclusions and spurious self-correlations in the analysis of nondimensionalized variables.     

Modeling Arctic Ocean heat transport and warming episodes in the 20th century caused by the intruding Atlantic Water

This study investigates the Arctic Ocean warming episodes in the 20th century using both a high-resolution coupled global climate model and historical observations. The model, with no flux adjustment, reproduces well the Atlantic Water core temperature （AWCT） in the Arctic Ocean and shows that four largest decadalscale warming episodes occurred in the 1930s, 70s, 80s, and 90s, in agreement with the hydrographic observational data. The difference is that there was no pre-warming prior to the 1930s episode, while there were two pre-warming episodes in the 1970s and 80s prior to the 1990s, leading the 1990s into the largest and prolonged warming in the 20th century. Over the last century, the simulated heat transport via Fram Strait and the Barents Sea was estimated to be, on average, 31.32 TW and 14.82 TW, respectively, while the Bering Strait also provides 15.94 TW heat into the west- ern Arctic Ocean. Heat transport into the Arctic Ocean by the Atlantic Water via Fram Strait and the Barents Sea correlates significantly with AWCT （ C = 0.75 ） at 0- lag. The modeled North Atlantic Oscillation （NAO） index has a significant correlation with the heat transport （ C = 0.37 ）. The observed AWCT has a significant correlation with both the modeled AWCT （ C =0.49） and the heat transport （ C =0.41 ）. However, the modeled NAO index does not significantly correlate with either the observed AWCT （ C = 0.03 ） or modeled AWCT （ C = 0.16 ） at a zero-lag, indicating that the Arctic climate system is far more complex than expected.     

Degradation and utilization of protein derived from <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> by marine microbial community

Microbial degradation and utilization of proteins derived from bacterial detritus were investigated in a microcosm experiment using Pseudomonas aeruginosa detritus as a substrate. To assess the effects of natural marine microbial communities on degradation and utilization of protein derived from P. aeruginosa cells, four microcosms were prepared: natural seawater (containing the natural microbial community) with P. aeruginosa detritus (N+Pa), autoclaved seawater with P. aeruginosa detritus (A+Pa), natural seawater (N) and autoclaved seawater (A) without adding anything as a control. The numbers of total and growing bacterial cells, protease activity, and transition of P. aeruginosa proteins were monitored in the four microcosms. Changes in the numbers of total and growing bacterial cells and protease activities indicated that bacterial detritus significantly stimulated the microbial community in the microcosms. Both the surviving P. aeruginosa in A+Pa and natural microbial community in N+Pa microcosms were able to degrade and utilize P. aeruginosa detritus; however, the community in N+Pa including various microbes maintained high activity longer, indicating that diversity is an important factor in keeping the community active. Even under the very high protease activity in N+Pa, 39-kDa and 48-kDa proteins from P. aeruginosa remained in the microcosm during the entire experiment (150 days). Immunoblotting suggested the 48-kDa protein was an intact molecule of OprP, which had been detected from the dissolved fraction of natural seawater in previous studies. This result suggests that the protein molecules that had been detected from natural seawater actually had a high tolerance to microbial degradation.     

Origin of calcium in aerosols over the western North Pacific

Weekly aerosol samples were collected from March 1981 to June 1983 at the six stations in the western North Pacific region and analyzed for Ca and Na. By coupling data with those previously reported for Al (Tsunogai et al., 1985), the following results and conclusion have been obtained. There was a positive correlation between the atmospheric concentration of Al and the concentration of nonsea salt Ca (nssCa). The nssCa/Al ratios from the six stations, however, considerably varied (from 0.84±0.36 to 3.00±1.91), and the ratios were usally larger than those of the crustal average or of usual soil in Japan. The Ca/Al ratios of Asian desert soil and loess vary from 0.52 to 1.29, which are similar to the nssCa/Al ratios of aerosols in the surface air over the western North Pacific region except at Onna, Okinawa. The exception may be due to a local effect of coral. These results suggest that a large part of nonsea salt Ca in the surface air over the western North Pacific is derived from arid regions in Asia and that the nssCa/Al ratio in aerosol varies with that of the source material.     

Characteristics of amorphous kerogens fractionated from terrigenous sedimentary rocks

A preliminary attempt to fractionate amorphous kerogens from terrigenous bulk kerogen by a benzene-water two phase partition method under acidic condition was made. Microscopic observation revealed that amorphous kerogens and structured kerogens were fractionated effectively by this method. Characteristics of the amorphous and structured kerogens fractionated by this method were examined by some chemical analyses and compared with those of the bulk kerogen and humic acid isolated from the same rock sample (Haizume Formation, Pleistocene, Japan). The elemental and infrared (IR) analyses showed that the amorphous kerogen fraction had the highest atomic$\text{H}\text{C}$ ratio and the lowest atomic $\text{N}\text{C}$ ratio and was the richest in aliphatic structures and carbonyl and carboxyl functional groups. Quantities of fatty acids from the saponification products of each geopolymer were in agreement with the results of elemental and IR analyses. Distribution of the fatty acids was suggestive that more animal lipids participate in the formation of amorphous kerogens because of the abundance of relatively lower molecular weight fatty acids (such as C₁₆ and C₁₈ acids) in saponification products of amorphous kerogens. On the other hand, although the amorphous kerogen fraction tends to be rich in aliphatic structures compared with bulk kerogen of the same rock samples, van Krevelen plots of elemental compositions of kerogens from the core samples (Nishiyama Oil Field, Tertiary, Japan) reveal that the amorphous kerogen fraction is not necessarily characterized by markedly high atomic $\text{H}\text{C}$ ratio. This was attributed to the oxic environment of deposition and the abundance of biodegraded terrestrial amorphous organic matter in the amorphous kerogen fraction used in this work.     

Double seismic zone beneath the middle of Hokkaido, Japan, in the southwestern side of the Kurile Arc

The vertical section of microearthquakes, determined accurately by using the Hokkaido University network, shows two dipping zones (the double seismic zone) 25–30 km apart in the depth range of 80–150 km beneath the middle of Hokkaido in the southwestern side of the Kurile arc. Hypocentral distribution of large earthquakes (m_b > 4) based on the ISC (International Seismological Centre) bulletin also shows the double seismic zone beneath the same region. The hypocentral distribution indicates that the frequency of events occurring in the lower zone is four times greater than that in the upper zone. The difference in seismic activity between the two zones beneath Hokkaido is in contrast with the region beneath northeastern Honshu in the northeastern Japan arc.Composite focal mechanisms of microearthquakes and individual mechanisms of large events mainly characterize the down-dip extension for the lower zone as is observed beneath northeastern Honshu. For the upper zone, however, the stress field is rather complex and not necessarily similar to that beneath northeastern Honshu. This may be considered to indicate the influence of slab contortion or transformation in the Hokkaido corner between the Kurile and the northeastern Japan arcs.     

CHIME age dating of monazites from metamorphic rocks and granitic rocks of the Ryoke belt in the Iwakuni area, Southwest Japan

Abstract CHIME (chemical Th-U-total Pb isochron method) ages were determined for monazite from gneisses and granitoids of the Ryoke belt in the Iwakuni area. The CHIME monazite ages are 99.6 ± 2.4, 98.9 ± 2.1 and 98.2 ± 5.7 Ma for the Ryoke gneiss, 90.7 ± 2.2, 89.7 ± 2.0 and 89.3 ± 2.2 Ma for the Tajiri Granite, 91.0 ± 3.2, 90.6 ± 3.2 and 89.9 ± 3.2 Ma for the Namera Granite, 89.3 ±3.3 and 88.6 ± 5.6 Ma for a small stock at Shimizu, and 87.3 ± 1.6 and 86.6 ± 2.1 Ma for the post-tectonic Shimokuhara Granite. The CHIME monazite ages, interpreted as the time of the first attainment at the amphibolite facies conditions for the gneisses and as the time of emplacement for the granites, respectively, agree with the field intrusive sequence. The present dating documented that the Ryoke metamorphism in the Iwakuni area reached the amphibolite facies conditions at ∼98 Ma, was complete at -87 Ma, the time of emplacement of the post-tectonic Shimokuhara Granite.     

Moment tensors of earthquakes in and near the Tibetan Plateau and their scaling law

Moment tensors of eleven major earthquakes in the Tibetan Plateau and its surrounding region from 1966 to 1980 are estimated by generalized inverse technique. The seismic source time function and focal depth are immediately determined in the inversion. The results show that moment tensors of some events differ significantly from double couple, the deviation increases with decreasing plunge angle of null axis. All these events occurred in the upper crust, much shallower than those reported so far, for example, in NEIS Bulletin. Focal mechanism solution obtained from the moment tensors are consistent with the idea that the Indian plate collides northwards with the Eurasian plate and that an eastward spreading exists in the crust of the Tibetan Plateau. The stress drops for earthquakes of intraplate are systematically higher than those of earthquakes in suture zone. The source process duration becomes longer with seismic moment, but for the same seismic moment, the process duration for earthquakes in suture zone is about 1.4 times of those for intraplate event, these results suggest that the earthquakes near suture zone may be of a special characteristics in source process differently from those in intraplate. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,14, 423 – 434, 1992.