Air–sea interaction over the Indian Ocean due to variations in the Indonesian throughflow

The effects of the Indonesian throughflow on the upper thermocline circulation and surface heat flux over the Indian Ocean are presented for a 3-D ocean model forced by two different monthly wind-stress climatologies, as they show interesting differences, which could have implications for long-term variability in the Indian and Australasian monsoons. The effects are determined by contrasting a control run with a run in which the throughflow is blocked by an artificial land-bridge across the exit channels into the Indian Ocean. In the model forced by ECMWF wind stresses, there is little impact on the annual mean surface heat flux in the region surrounding the throughflow exit straits, whereas in the model forced by SSM/I-based wind stresses, a modest throughflow of less than 5 ᎒⁶ m³s^-1 over the upper 300 m induces an extra 10-50 Wm^-2 output. In the SSM/I-forced model, there is insignificant penetration of the throughflow into the northern Indian Ocean. However, in the ECMWF-forced model, the throughflow induces a 5-10 Wm^-2 reduction in heat input into the ocean, i.e., an effective output, over the Somali Current in the annual mean. These differences are attributed to differences in the strength and direction of the Ekman transport of the ambient flow, and the vertical structure of the transport and temperature anomalies associated with the throughflow. In both models, the throughflow induces a 5-30 Wm^-2 increase in net output over a broad swathe of the southern Indian Ocean, and a reduction in heat output of 10-60 Wm^-2 in a large L-shaped band around Tasmania. Effective increases in throughflow-induced net output reach up to 40 (60) Wm^-2 over the Agulhas Current retroflection in the ECMWF (SSM/I)-forced model. Seasonal variations in the throughflow's effect on the net surface heat flux are attributed to seasonal variations in the ambient circulation of the Indian Ocean, specifically in coastal upwelling along the south Javan, west Australian, and Somalian coasts, and in the depth of convective overturning between 40°S to 50°S, and its sensing of the mean throughflow's thermal anomaly. The seasonal anomalies plus annual mean yield maximum values for the throughflow-induced net surface heat output in boreal summer. Values may exceed 40 Wm^-2 in the southern Indian Ocean interior in both models, exceed 60 Wm^-2 over the Agulhas retroflection and immediate vicinity of the exit channels in the SSM/I-forced model, and reach 30 Wm^-2 over the Somali jet in the ECMWF-forced model.     

Effective and Equitable Dissemination of Seasonal-to-Interannual Climate Forecasts: Policy Implications from the Peruvian Fishery during El Niño 1997–98

The development of seasonal-to-interannual climate predictions has spurred widespread claims that the dissemination of such forecasts will yield benefits for society. Based on the use as well as non-use of forecasts in the Peruvian fishery during the 1997–98 El Niño event, weidentify: (1) potential constraints on the realization of benefits, such aslimited access to and understanding of information, and unintended reactions; (2) theneed for an appropriately detailed definition of societal benefit, considering whose welfare counts as a benefit among groups such as labor, industry, consumers, citizens of different regions, and future generations.We argue that consideration of who benefits, and an understanding of potential socioeconomic constraints and how they might be addressed, should be brought to bear on forecast dissemination choices. We conclude with examples of relevant dissemination choices made using this process.     

Determination of Area-Averaged Water Vapour Fluxes with Large Aperture and Radio Wave Scintillometers over a Heterogeneous Surface – Flevoland Field Experiment

A large aperture scintillometer (LAS) andradio wave scintillometer (RWS)were installed over a heterogeneous areato test the applicability of the scintillation method.The heterogeneity in the area, whichconsisted of many plots, was mainly caused bydifferences in thermal properties ofthe crops; the variations in theaerodynamic roughness lengthwere small. The water vapour fluxesderived from the combined LAS-RWSsystem, also known as the two-wavelengthmethod, agreed fairly well with the aggregatedwater vapour fluxes derived from in-situeddy covariance measurements. The water vapourfluxes derived from a stand-alone LASare also presented. It was found that a single LASand an estimate of the area averagedavailable energy (using a simple parameterisationscheme) can provide also reasonablearea-averaged water vapour fluxes.     

Particle size dependent response of aerosol counters

During an international workshop at the Institute for Experimental Physics of the University of Vienna, Austria, which was coordinated within the Committee on Nucleation and Atmospheric Aerosols (IAMAS-IUGG), 10 instruments for aerosol number concentration measurement were studied, covering a wide range of methods based on various different measuring principles. In order to investigate the detection limits of the instruments considered with respect to particle size, simultaneous number concentration measurements were performed for monodispersed aerosols with particle sizes ranging from 1.5 to 50 nm diameter and various compositions.The instruments considered show quite different response characteristics, apparently related to the different vapors used in the various counters to enlarge the particles to an optically detectable size. A strong dependence of the 50% cutoff diameter on the particle composition in correlation with the type of vapor used in the specific instrument was found. An enhanced detection efficiency for ultrafine hygroscopic sodium chloride aerosols was observed with water operated systems, an analogous trend was found for n-butanol operated systems with nonhygroscopic silver and tungsten oxide particles.     

Advective, orographic and radiation fog in the Tarapacá region, Chile

A project in northern Chile was undertaken to determine the origin and behaviour of fog in the coastal and inland locations of the Tarapacá Region. In the Pampa del Tamarugal, 50 km from the sea, conditions exist for the formation of radiation fog. Advective fog has been studied on the coast and orographic fog was observed at a few coastal sites near mountain ranges with elevations above 1000 m. Fog water collected by two standard fog collectors (SFC) for 3 1/2 years showed an average flux of 8.5 l m⁻² day⁻¹ on the coast and 1.1 l m⁻² day⁻¹ inland 12 km from the coastline. On only a few days in 10 months was water collected at the inland site of Pampa del Tamarugal. GOES satellite images are shown to illustrate the pattern of formation of the stratocumuli cloud over the sea, its approach to the coastline, the entrance of fog by corridors through the coastal range and the presence of radiation fog inland. The results are important for the understanding of fog formation and dissipation along the coastal mountain range and for the recognition of potential sites for the installation of fog water collectors, which can be used as a water source in the Atacama Desert. The results also provide vital information for use in the preservation of the unique ecosystems of the most arid desert of the world.     

沐川太平砂岩型铼钼（饿）矿点的地质特征和矿化时代

四川沐川县民主-太平-带含钼砂岩为一新矿化类型——沉积砂岩型铼钼（锇）矿点。X-射线粉晶衍射分析结果表明其中微-细晶鳞片状含钼矿物为晶质辉钼矿；高精度质谱分析发现辉钼矿中分散元素Re和铂族元素Os含量很高，具有重要的综合利用价值；高精度Re-Os同位素测年证明辉钼矿形成年龄与含矿的中生代红物学和矿床学均具有重要的理论意义和应用价值。     

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

Marymia: an Archean, amphibolite facies-hosted, orogenic lode-gold deposit overprinted by Palaeoproterozoic orogenesis and base metal mineralisation, Western Australia

The Marymia gold deposit, comprising two orebodies, Keillor 1 and Keillor 2, is at the northern end of the Plutonic Well greenstone belt in the Marymia Inlier, in the southern Capricorn Orogen, just north of the Yilgarn craton. The Marymia Inlier is a discrete fault-bounded Archean gneiss-granitoid-greenstone domain surrounded by sedimentary basins that were formed and variably metamorphosed and deformed during several Palaeoproterozoic orogenic cycles. The greenstone sequence at Marymia is stratigraphically and geochemically similar to greenstone sequences in the Yilgarn craton, but was subjected to further deformation and metamorphism in the Palaeoproterozoic. Late Archean deformation (D1-D2) was ductile to brittle-ductile in style, whereas Palaeoproterozoic deformation was predominantly brittle. Equilibrium mineral assemblages indicate that peak amphibolite-facies metamorphism (540-575 °C, <3 kb) was overprinted by greenschist-facies metamorphism (300-360 °C). Petrographic textures indicate that prograde metamorphism was coeval with D1-D2, with peak metamorphism early to syn D2. Gold mineralisation at Marymia is hosted in metamorphosed tholeiitic basalts and banded iron formation. On a gross scale, the distribution of gold is controlled by D2 folds and shear zones. Lithological contacts with strong rheological or chemical contrasts provide local controls. Gold-related alteration comprises subtle millimetre- to centimetre-wide zones of silicification with variable amounts of quartz, hornblende, biotite, K-feldspar, plagioclase, calcite/siderite, scheelite, titanite, epidote, sulfide and telluride minerals. Quartz veins are generally narrow and discontinuous with low total volume of quartz. Gold is sited in the wall rock, at vein salvedges or within stringers of wall rock within veins. There are two distinct opaque-mineral assemblages: pyrite-pyrrhotite-chalcopyrite-galena and hessite-petzite-altaite-Bi-telluride-galena. Ore samples are variably enriched in Ag, Te, Pb, W, Cu, S and Fe reflecting heterogeneity of the ore mineralogy. Structural timing and temperature of formation of alteration and ore minerals support deposition of gold during late peak amphibolite-facies metamorphism from neutral to alkaline (pH=5-6), moderately oxidising (log P_O2,-21-22) and CO₂-bearing (X_CO2 Ƹ.2) fluids. The total sulfur content of the fluid is estimated at 1mDS. Lead isotope compositions support derivation of lead from within the local greenstone sequence. Gold lodes were deformed by faults and shear zones in the Palaeoproterozoic, with only limited remobilisation. Subeconomic, carbonate vein- and breccia-hosted base metal mineralisation is locally hosted within Palaeoproterozoic fault zones, which clearly cut gold lodes. Base-metal-related alteration is characterised by intense carbonatisation, chloritisation, and albitisation of the mafic host rocks. Mineral assemblages are consistent with formation at greenschist facies conditions. Lead isotope compositions support crystallisation at ca. 1.7 Ga from lead that is similar in composition to earlier gold-related galena.