块状硫化物矿石中硫化物的压溶和增生及成矿意义——以加拿大西部矿床为例

加拿大西部块状硫化物矿石普遍地发生过硫化物的压溶和增生。增生作用根据增生体的成分可以分为同质增生和异质增生，根据动力环境可以分为静态增生和动态增生。三晶嵌接结构可以是静态增生的产物。压溶和增生是块状硫化物矿床成岩和变质过程中的重要作用。脉石矿物的压溶可使原生矿石就地加富，硫化物的压溶可使成矿物质发生再活化。增生可促进矿质沉淀。富含硫化物的地层之所以能成为地球化学障而有利于后期热液叠加和层控矿床的形成，硫化物晶芽的增生是一种重要机制。     

Multispectral thermal infrared mapping of the 1 October 1988 Kupaianaha flow field,Kilauea volcano,Hawaii

Multispectral thermal infrared radiance measurements of the Kupaianaha flow field were acquired with the NASA airborne Thermal Infrared Multispectral Scanner (TIMS) on the morning of 1 October 1988. The TIMS data were used to map both the temperature and emissivity of the surface of the flow field. The temperature map depicted the underground storage and transport of lava. The presence of molten lava in a tube or tumulus resulted in surface temperatures that were at least 10° C above ambient. The temperature map also clearly defined the boundaries of hydrothermal plumes which resulted from the entry of lava into the ocean. The emissivity map revealed the boundaries between individual flow units within the Kupaianaha field. In general, the emissivity of the flows varied systematically with age but the relationship between age and emissivity was not unique. Distinct spectral anomalies, indicative of silica-rich surface materials, were mapped near fumaroles and ocean entry sites. This apparent enrichment in silica may have resulted from an acid-induced leaching of cations from the surfaces of glassy flows. Such incipient alteration may have been the cause for virtually all of the emissivity variations observed on the flow field, the spectral anomalies representing areas where the acid attack was most intense.     

2.8-Ma ash-flow caldera at Chegem River in the northern Caucasus Mountains (Russia), contemporaneous granites, and associated ore deposits

Diverse latest Pliocene volcanic and plutonic rocks in the north-central Caucasus Mountains of southern Russia are newly interpreted as components of a large caldera system that erupted a compositionally zoned rhyolite-dacite ash-flow sheet at 2.83 ± 0.02 Ma (sanidine and biotite ⁴⁰Ar/³⁹Ar). Despite its location within a cratonic collision zone, the Chegem system is structurally and petrologically similar to typical calderas of continental-margin volcanic arcs. Erosional remnants of the outflow Chegem Tuff sheet extend at least 50 km north from the source caldera in the upper Chegem River. These outflow remnants were previously interpreted by others as erupted from several local vents, but petrologic similarities indicate a common origin and correlation with thick intracaldera Chegem Tuff. The 11 × 15 km caldera and associated intrusions are superbly exposed over a vertical range of 2,300 m in deep canyons above treeline (elev. to 3,800 m). Densely welded intracaldera Chegem Tuff, previously described by others as a rhyolite lava plateau, forms a single cooling unit, is > 2 km thick, and contains large slide blocks from the caldera walls. Caldera subsidence was accommodated along several concentric ring fractures. No prevolcanic floor is exposed within the central core of the caldera. The caldera-filling tuff is overlain by andesitic lavas and cut by a 2.84 ± 0.03-Ma porphyritic granodiorite intrusion that has a cooling age analytically indistinguishable from that of the tuffs. The Eldjurta Granite, a pluton exposed low in the next large canyon (Baksan River) 10 km to the northwest of the caldera, yields variable K-feldspar and biotite ages (2.8 to 1.0 Ma) through a 5-km vertical range in surface and drill-hole samples. These variable dates appear to record a prolonged complex cooling history within upper parts of another caldera-related pluton. Major W-Mo ore deposits at the Tirniauz mine are hosted in skarns and hornfels along the roof of the Eldjurta Granite, and associated aplitic phases have textural features of Climax-type molybdenite porphyries in the western USA. Similar ⁴⁰Ar/³⁹Ar ages, mineral chemistry, and bulk-rock compositions indicate that the Chegem Tuff, intracaldera intrusion, and Eldjurta Granite are all parts of a large magmatic system that broadly resembles the middle Tertiary Questa caldera system and associated Mo deposits in northern New Mexico, USA. Because of their young age and superb three-dimensional exposures, rocks of the Chegem-Tirniauz region offer exceptional opportunities for detailed study of caldera structures, compositional gradients in volcanic rocks relative to cogenetic granites, and the thermal and fluid-flow history of a large young upper-crustal magmatic system.     

Complexing capacity of the nutrient medium and its relation to inhibition of algal photosynthesis by copper

The toxic effect of copper on phytoplankton production is investigated in waters having different complexing capacities. It is demonstrated that a water’s complexing capacity does not guarantee that an equivalent amount of copper could be tolerated without adversely affecting algal production. Possible explanations for these findings are offered and discussed. It is deduced that ionic copper probably is already toxic to planktonic algae at concentrations of about 10^?10 mole/l.     

Organic facies and geochemical aspects in Neogene neritic sediments of the Takafu syncline area of central Japan: Paleoenvironmental and sedimentological reconstructions

Abstract Organic petrological observations of kerogen macerals and organic geochemical analyses of carbon isotopes of kerogen macerals and biomarkers were conducted on Neogene neritic sediments of the Takafu syncline area of central Japan. The Senmi, Sakainomiya and Lower Shigarami Formations in that area were deposited at the neritic provinces on the southern edge of the paleo‐Japan Sea during the Late Miocene to Early Pliocene. Sedimentary organic matter in these formations was almost terrigenous in origin. Changes in kerogen maceral compositions reflect sedimentological and tectonic histories evaluated in previous studies from sedimentary facies and paleontology. It was found that carbon isotope ratios (δ¹³C) of kerogen macerals increased from ?28‰ to ?25‰ from the Sakainomiya to the lower part of the Lower Shigarami Formations. The cause of that increase was presumably the expansion of C₄ plants into southwest Japan. The timing was concordant with that of the expansion of C₄ plant grasslands in East Asia. The oxicity (oxic to anoxic) conditions of sea bottoms evaluated from pristane/phytane ratios varied. Particularly, in the lower part of the Senmi Formation, layers in which no steroid biomarkers could be detected were found, and had presumably formed under oxic conditions when strong biodegradation had occurred. Concentrations of regular (C₂₇–C₂₉) steranes and dinosteranes were higher in the Sakainomiya and Lower Shigarami Formations. This indicates that dinoflagellates‐dominant primary productions were higher at those stages. In addition, concentrations of diatomaceous biomarkers such as C₂₆ norsterane increased from the Lower Shigarami Formation, thus adding diatoms to the major producers. Furthermore, similar associations between the increases of δ¹³C values of kerogen macerals and concentrations of diatomaceous biomarkers were observed in the Takafu syncline area. Thus, the expansion of C₄ plants was possibly associated with the high production of diatom in the shallow‐marine areas of the paleo‐Japan Sea during the Neogene Period.     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.     

Petrology and geochronology of basalt breccia from the 1996 earthquake swarm of Loihi seamount, Hawaii: magmatic history of its 1996 eruption

 Samples of basalt were collected during the Rapid Response cruise to Loihi seamount from a breccia that was probably created by the July to August 1996 Loihi earthquake swarm, the largest swarm ever recorded from a Hawaiian volcano. ²¹⁰Po–²¹⁰Pb dating of two fresh lava blocks from this breccia indicates that they were erupted during the first half of 1996, making this the first documented historical eruption of Loihi. Sonobuoys deployed during the August 1996 cruise recorded popping noises north of the breccia site, indicating that the eruption may have been continuing during the swarm. All of the breccia lava fragments are tholeiitic, like the vast majority of Loihi's most recent lavas. Reverse zoning at the rim of clinopyroxene phenocrysts, and the presence of two chemically distinct olivine phenocryst populations, indicate that the magma for the lavas was mixed just prior to eruption. The trace element geochemistry of these lavas indicates there has been a reversal in Loihi's temporal geochemical trend. Although the new Loihi lavas are similar isotopically and geochemically to recent Kilauea lavas and the mantle conduits for these two volcanoes appear to converge at depth, distinct trace element ratios for their recent lavas preclude common parental magmas for these two active volcanoes. The mineralogy of Loihi's recent tholeiitic lavas signify that they crystallized at moderate depths (∼8–9 km) within the volcano, which is approximately 1 km below the hypocenters for earthquakes from the 1996 swarm. Taken together, the petrological and seismic evidence indicates that Loihi's current magma chamber is considerably deeper than the shallow magma chamber (∼3–4 km) in the adjoining active shield volcanoes. Received: 21 August 1997 / Accepted: 15 February 1998     

Geophysical Expression of Low Sulphidation Epithermal Au-Ag Deposits and Exploration Implications –Examples from the Hokusatsu Region of SW Kyushu, Japan–

Abstract: Low sulphidation epithermal Au-Ag deposits constitute a major exploration target for many mining companies worldwide. These deposits are commonly characterized by quartz vein systems which formed at temperatures often in the range 150–250°C giving rise to major alteration halos. Accompanying mineralization and associated alteration is the destruction and redistribution of magnetite in the host rocks and the formation of various K-bearing minerals such as adularia, illite and alunite. These alteration halos can often cover an area of at least several square kilometres and as such have the potential to be detected during reconnaissance geological surveys utilizing high resolution airborne aeromagnetic and radiometric sensors.
Analysis of airborne magnetic and radiometric data recently acquired over the Hokusatsu Region of SW Kyushu indicates that major low sulphidation epithermal Au-Ag deposits are characterized by several distinct geophysical features varying with the degree of post-mineralization cover and level of erosion. Several deposits coincide with extensive magnetic "flat" and high radiometric K–counts. In addition, several workers have shown that a very close association exists between Bouguer gravity highs and epithermal Au mineralization in the Hokusatsu Region. The combined use of areomagnetics, radiometrics and gravity data therefore provides an exceptionally effective approach to exploration for low sulphidation epithermal Au–Ag deposits in the Hokusatsu Region of Japan.     

From subduction to transform motion: a seabeam survey of the Hellenic trench system

Preliminary results of a multi-narrow beam survey of the Hellenic trench system, in the Eastern Mediterranean, are presented. The southwestern Ionian branch is divided in small basins, partly filled with Pleistocene sediments. The morphology suggests that the basins are deformed by a compressional stress acting roughly perpendicularly to the trench along N50°E. This direction is the direction of the regional slip vector of the shallow thrust-type earthquakes. The structure of the southeastern Pliny-Strabo branch is quite different. Narrow en-e´chelon slots, oriented N40°E, have been mapped within the main troughs oriented N60°E. The regional earthquake slip vector is also oriented along N40°E. We conclude that the Hellenic trench system is an active subduction system, dominated by thrust along the Ionian branch and by transform motion along the Pliny-Strabo branch.