Speeding Up the Analytical Workflow for Coltan Fingerprinting by an Integrated Mineral Liberation Analysis/LA‐ICP‐MS Approach

Coltan (the African trade name for columbite‐tantalite, a tantalum ore) is one of several raw materials that finance the civil wars in the eastern provinces of the Democratic Republic of the Congo. To improve the transparency along the tantalum trade chain, a ‘certificate of origin’ for so‐called ‘conflict minerals’ has been recommended by the United Nations. Accordingly, the German Federal Institute for Geosciences and Natural Resources (BGR) has developed an analytical fingerprint procedure for coltan. Mineral formation age, modal mineralogy and chemical composition are important fingerprint parameters. The original workflow to obtain these parameters was streamlined and is now based on mineral liberation analysis and LA‐ICP‐MS. The use of an ICP‐MS instrument with a detector system covering an extended linear dynamic range and the application of an internal standard‐independent calibration strategy allowed data for major and trace element determination and mineral formation age estimates to be obtained simultaneously. The analytical results of this new approach were compared with analytical techniques of the original workflow and showed excellent agreement in terms of mineralogical and chemical characterisation and mineral formation age of coltan samples. Within a test, samples of different origin were allocated correctly and simple, binary mixtures were also identified successfully.     

The geodynamic and limnological evolution of Balkan Lake Ohrid,possibly the oldest extant lake in Europe

Studies of the upper 447 m of the DEEP site sediment succession from central Lake Ohrid, Balkan Peninsula, North Macedonia and Albania provided important insights into the regional climate history and evolutionary dynamics since permanent lacustrine conditions established at 1.36 million years ago (Ma). This paper focuses on the entire 584-m-long DEEP sediment succession and a comparison to a 197-m-long sediment succession from the Pestani site ~5 km to the east in the lake, where drilling ended close to the bedrock, to unravel the earliest history of Lake Ohrid and its basin development. ²⁶Al/¹⁰Be dating of clasts from the base of the DEEP sediment succession implies that the sedimentation in the modern basin started at c. 2 Ma. Geophysical, sedimentological and micropalaeontological data allow for chronological information to be transposed from the DEEP to the Pestani succession. Fluvial conditions, slack water conditions, peat formation and/or complete desiccation prevailed at the DEEP and Pestani sites until 1.36 and 1.21 Ma, respectively, before a larger lake extended over both sites. Activation of karst aquifers to the east probably by tectonic activity and a potential existence of neighbouring Lake Prespa supported filling of Lake Ohrid. The lake deepened gradually, with a relatively constant vertical displacement rate of ~0.2 mm a⁻¹ between the central and the eastern lateral basin and with greater water depth presumably during interglacial periods. Although the dynamic environment characterized by local processes and the fragmentary chronology of the basal sediment successions from both sites hamper palaeoclimatic significance prior to the existence of a larger lake, the new data provide an unprecedented and detailed picture of the geodynamic evolution of the basin and lake that is Europe’s presumed oldest extant freshwater lake.     

Assessment of runoff,water and sediment quality in the Selenga River basin aided by a web-based geoservice

The Selenga River is the main artery feeding Lake Baikal. It has a catchment of ~450000 km² in the boundary region between Northern Mongolia and Southern Siberia. Climate, land use and dynamic socioeconomic changes go along with rising water abstractions and contaminant loads originating from mining sites and urban wastewater. In the future, these pressures might have negative impacts on the ecosystems of Lake Baikal and the Selenga River Delta, which is an important wetland region in itself and forms the last geobiochemical barrier before the Selenga drains into Lake Baikal. The following study aims to assess current trends in hydrology and water quality in the Selenga-Baikal basin, identify their drivers and to set up models (WaterGAP3 framework and ECOMAG) for the prediction of future changes. Of particular relevance for hydrological and water quality changes in the recent past were climate and land use trends as well as contaminant influx from mining areas and urban settlements. In the near future, additional hydrological modifications due to the construction of dams and abstractions/water diversions from the Selenga’s Mongolian tributaries could lead to additional alterations.     

On Probing the Inertial Subrange

For an extensive turbulent wind speed data set collected on the open ocean, the optimum sampling time is determined to calculate inertial-range spectra. Such spectra are widely used to estimate surface fluxes. The optimum sampling time corresponds to the turbulent memory time, the minimum period after which a given time series can be interpreted as a new independent measurement. In our case, this interval is found to be only about six seconds.Separate spectral levels are calculated from the three measured vector components of the wind. Their ratios are compatible with the assumption of an isotropic inertial subrange, but scatter considerably. Alignment factors are developed based on Kolmogorov's theory, and the aligned spectral levels coincide within a few percent. It is proposed that alignment might be a more reliable test than the ratio of the spectral levels to determine whether observations have taken place in a universal inertial subrange. It is recommended that all three wind components are used to estimate the dissipation rate.     

Isotropic and anisotropic correlations in turbulent wind speed data

The correlations in turbulent wind speed data from the open ocean are studied. They are calculated as Fourier transforms of the spectraldensities, which are computed from Fourier transforms of the measured windspeed components. All correlations are found to decay within a few seconds.It is shown that the spectra are most efficiently calculated using data sections whose length does not exceed the observed correlation decay time.Longer runs include more random noise without containing more information.The ratio of the along-wind to transverse spectral levels is investigatedand found to be in excellent agreement with the assumption of isotropy inthe inertial wave number range.     

In situ hydrocarbon concentrations from pressurized cores in surface sediments, Northern Gulf of Mexico

Two newly developed coring devices, the Multi-Autoclave-Corer and the Dynamic Autoclave Piston Corer were deployed in shallow gas hydrate-bearing sediments in the northern Gulf of Mexico during research cruise SO174 (Oct–Nov 2003). For the first time, they enable the retrieval of near-surface sediment cores under ambient pressure. This enables the determination of in situ methane concentrations and amounts of gas hydrate in sediment depths where bottom water temperature and pressure changes most strongly influence gas/hydrate relationships. At seep sites of GC185 (Bush Hill) and the newly discovered sites at GC415, we determined the volume of low-weight hydrocarbons (C₁ through C₅) from nine pressurized cores via controlled degassing. The resulting in situ methane concentrations vary by two orders of magnitudes between 0.031 and 0.985 mol kg^− 1 pore water below the zone of sulfate depletion. This includes dissolved, free, and hydrate-bound CH₄. Combined with results from conventional cores, this establishes a variability of methane concentrations in close proximity to seep sites of five orders of magnitude. In total four out of nine pressure cores had CH₄ concentrations above equilibrium with gas hydrates. Two of them contain gas hydrate volumes of 15% (GC185) and 18% (GC415) of pore space. The measurements prove that the highest methane concentrations are not necessarily related to the highest advection rates. Brine advection inhibits gas hydrate stability a few centimeters below the sediment surface at the depth of anaerobic oxidation of methane and thus inhibits the storage of enhanced methane volumes. Here, computerized tomography (CT) of the pressure cores detected small amounts of free gas. This finding has major implications for methane distribution, possible consumption, and escape into the bottom water in fluid flow systems related to halokinesis.     

Thermodynamic mixing behavior of synthetic Ca-Tschermak–diopside pyroxene solid solutions: I. Volume and heat capacity of mixing

The unite cell parameters and heat capacities of a series of synthetic clinopyroxenes on the join Ca-Tschermak (CaTs)−diopside (Di) were measured using X-ray powder diffraction and calorimetric methods, respectively. The volume of mixing at 298 K shows a negative asymmetric deviation from ideality. A two-parameter Margules fit to the data yields W _CaTs−Di ^V = −0.29 ± 0.11 cm³ mol⁻¹ and W _Di−CaTs ^V = −1.14 ± 0.14 cm³ mol⁻¹. Heat capacities were determined between 5 and 923 K by heat-pulse at 5−302 K and differential-scanning calorimetry at 143−923 K. The precision of the low and high temperature C _p data is better than ±1%. Polynomials of the form C _p = a + bT ^−1/2 + cT ⁻² + dT ⁻³ were fitted to the C _p data in the temperature range between 250 and 925 K. Thermal entropy values [S ₂₉₈ − S ₀] and [S ₉₀₀ −S ₀] as well as enthalpies [H ₂₉₈ − H ₀] and [H ₉₀₀ − H ₀] were calculated for all members of the solid solution series. No significant deviation from ideal mixing behavior was observed.     

Justification of the Inertial Dissipation Technique in Anisotropic Mean Flow

The inertial dissipation technique has been successfully employed for many years to measure the wind stress, especially over the open ocean. This method is based on Kolmogorov's theoretical prediction of universality in the inertial wavenumber range. The theory was developed under the assumption of locally isotropic turbulence, and the dissipation technique has been criticized as lacking justification in a boundary-layer shear flow. In this paper, Kolmogorov's theory is explicitly applied to the anisotropic conditions prevailing in the atmosphere. It is shown that the inertial dissipation method relies on the homogeneity and isotropy of the spectrum _ii(k) for k in the inertial range. This is a weaker condition than Kolmogorov's assumption of isotropy of the correlation function B_ij(r). In high-Reynolds-number shear flows, isotropy of _ii(k) is realized to a good approximation, whereas isotropy of B_ij(r) is not. Some consequences for the experimental implementation are discussed; in particular, sampling times (block lengths) not exceeding the order of the eddy life time are recommended in the calculation of spectra.