Rates of trace metal and nutrient diagenesis in an intertidal creek bank

Carbon mineralization in marine sediments is a key process involved in the cycling of carbon, nutrients and trace metals. However, as marine sediments are usually diffusion dominated, the pace of element and nutrient cycling is slow, because consumption of oxidants and/or nutrients in the pore waters via microbial activity often outpaces resupply. Adding an advective flow component to such a system should change the biogeochemical dynamics considerably. Numerical simulations show that shallow coastal aquifers affected by tidal forces can establish ground water velocities of up to 7 cm h⁻¹, driving a circulation of sea water through the sediments with subsequent discharge. Although known to enhance solute exchange, the impact of advection on early diagenesis has not received much attention.To address this issue we mapped the interstitial water chemistry down to 2.5 m sediment depth along a transect on an intertidal creek bank that is subject to a periodic advective flow. Additionally a recently developed hydrogeological simulation of the creek bank was applied to calculate ages of the sampled pore waters. Sample ages obtained were used to quantify (flow path integrated) production or depletion rates for trace metals, nutrients, and sulphate.We find young sea water percolating relatively fast through sediments close to the creek showing strong signs of alteration, whereas pore waters from diffusion dominated regions are less altered. The increase in inorganic nutrients and some trace elements along the flow path requires high rates of turnover. Sulphate, molybdenum, and uranium are almost completely depleted after 200 days, while dissolved inorganic carbon (DIC), ammonia, and manganese increase. Averaged production rates for DIC appear to be three times higher when advection dominated the subsurface flow regime. Our results demonstrate that sites dominated by advection generally show signs of faster rates of diagenetic reactions.     

Ecological stability during the LGM and the mid-Holocene in the Alpine Steppes of Tibet?

Arid and Alpine ecosystems are known for extreme environmental changes during the Late Quaternary. We hypothesize that the world's largest Alpine arid ecosystem however, the Alpine Steppes of the Tibetan highlands, remained ecologically stable during the LGM and the mid-Holocene. This hypothesis is tested by distributional range of plant species, plant life forms and rate of endemism. The set of character species has a precipitation gradient between 50 and 350 mm/a, testifying for resilience to precipitation changes. 83% of the species have a wider vertical range than 1000 m used as a proxy for resilience to temperature changes. 30% of the species are endemic with 10 endemic genera, including plate-shaped cushions as a unique plant life form. These findings are in line with palaeo-ecological proxies (δ¹⁸O, pollen) allowing the assumption that Alpine Steppes persisted during the LGM with 3 to 4 K lower summer temperatures.During the mid-Holocene, forests could have replaced Alpine Steppes in the upper catchments of the Huang He, Yangtze, Mekong, Salween and Yarlung Zhangbo, but not in the interior basins of the north-western highlands, because the basins were then flooded, suppressing forests and supporting the environmental stability of this arid Alpine grassland biome.     

A case study on the correlation of micro-contaminants and potassium in the Leine River (Germany)

River monitoring with focus on the correlation of 41 micro-contaminants with K⁺ and its temporal and spatial variation was carried out in the Leine River (Germany). A positive correlation of concentrations of wastewater-related micro-contaminants and K⁺ is to be expected in receiving waters of wastewater treatment plant (WWTP) effluent since urine is a significant source of K⁺ in WWTP effluent. This correlation was found for compounds, which meet the following criteria: (1) WWTP effluent is the dominating source of the compound, (2) variability of its mass flux in the WWTP is negligible, and (3) the compound is persistent in WWTPs and in the environment. The excellent positive correlation of carbamazepine with K⁺ resulted in the fitting of a universal linear equation to the summer and winter data. For almost all other correlating compounds (1H-benzotriazole, citalopram, diclofenac, metoprolol, sotalol, sulfamethoxazole and tolyltriazole), slopes of the line fittings were steeper in winter (x-axis: K⁺, y-axis: respective micro-contaminant). This has been attributed to a presumed lower degree of degradation and attenuation within WWTPs and in the environment due to low temperatures as well as an increase in consumption of these compounds in the winter months. As part of this research, a sampling event along the entire flow path of the Leine River (∼280 km) was conducted to identify compounds demonstrating stable ratios of various respective micro-contaminants with K⁺. Among other compounds, carbamazepine, sulfamethoxazole, and tolyltriazole demonstrated the best correlations with R² > 0.89. Potassium-equivalents of the individual micro-contaminants depended on land use and population structure of the investigated river section.     

Bedform patterns, subglacial meltwater events, and Late Devensian ice sheet dynamics in north-central Ireland

Glacial bedform patterns and sediments deposited by the temperate and polythermal Late Devensian ice sheet in north-central Ireland record changes in the processes, location, and magnitude of subglacial meltwater throughout the last full glacial cycle (21–14 ¹⁴C kyear BP). Meltwater characteristics are related directly to basal ice thermal regime and ice dynamics, including ice velocity and shifts in the location of ice centres. Therefore, reconstructed meltwater characteristics may provide insight into wider controls on dynamic ice behaviour. A range of meltwater-related features are present across north-central Ireland. These include tunnel valleys, drumlin leeside sequences, eskers, and boulder lags. Other bedforms including Rogen moraines were modified by meltwater activity along ice streams. Meltwater was stored subglacially in two contrasting regions located beneath or near ice centres in north-central Ireland. (1) The Lough Erne Basin is developed in a lowland depression occupied partly by subglacial Rogen moraine ridges which were formed around the time of the last glacial maximum. Meltwater was stored between Rogen ridge crests and released by hydraulic jacking associated with drumlinisation (16.6 ¹⁴C kyear BP) and ice streaming (13.8 ¹⁴C kyear BP). (2) The Lough Neagh Basin occupies a similar lowland depression and was the location of an ice sheet centre throughout the last glacial cycle. No bedforms are present beneath or immediately surrounding Lough Neagh. A larger, more continuous meltwater lake existed in the Lough Neagh depression, probably sealed by a region of cold-based ice outside lake margins. Water escaped through regional-scale tunnel valleys, particularly the Poyntzpass channel which was active during the Carlingford ice readvance (Killard Stadial, correlated with Heinrich event 1 at 14.5 ¹⁴C kyear BP). Overall, reconstructed subglacial lake characteristics and drainage mechanisms are related closely to basal ice thermal regime and substrate relief (controlling lake geometry), and provide insight into controls on overall ice sheet dynamics.     

A heat flow and physical properties package for the surface of Mercury

European Space Agencies fifth cornerstone mission BepiColombo includes a ‘Surface Element’ to land a scientific payload on the surface of Mercury. The current strawman payload includes a heat flow and physical properties package (HP³), focussing on key thermal and mechanical properties of the near-surface material (down to a depth of 2–5 m) and the measurement of heat flow from Mercury's interior, an important constraining parameter for models of the planet's interior and evolution. We present here an overview of the HP³ experiment package and its possible accommodation in a self-inserting ‘mole’ device. A mole is considered to be the most appropriate deployment method for HP³, at least in the currently-assumed case of an airbag-assisted soft landing architecture for the Mercury Surface Element.     

The magnetic field draping direction at Mars from April 1999 through August 2004

Using more than five years of data from the magnetometer and electron reflectometer (MAG/ER) on Mars Global Surveyor (MGS), we derive the draping direction of the magnetic field above a given latitude band in the northern hemisphere. The draping direction varies on timescales associated with the orbital period of Mars and with the solar rotation period. We find that there is a strongly preferred draping direction when Mars is in one solar wind sector, but the opposite direction is not preferred as strongly for the other solar wind sector. This asymmetry occurs at or below the magnetic pileup boundary (MPB), is observed preferentially on field lines that connect to the collisional ionosphere, and is independent of planetary longitude. The observations could be explained by a hemispherical asymmetry in the access of field lines to the low-altitude ionosphere, or possibly from global modification of the low-altitude solar wind interaction by crustal magnetic fields. We show that the draping direction affects both the penetration of sheath plasma to 400 km altitudes on the martian dayside and the radial component of the magnetic field on the planetary night side.     

The Cretaceous/Paleogene (K‐Pg) boundary at the J Anomaly Ridge,Newfoundland (IODP Expedition 342, Hole U1403B)

We present results of an in‐situ geochemical study using laser‐ablation inductively coupled plasma–mass spectrometry (LA‐ICP‐MS) analyses along a ~4.3 cm long section across the K‐Pg event bed, drilled during IODP Expedition 342 at J Anomaly Ridge south of St. John's, Newfoundland. This section comprises the Maastrichtian with a sharp boundary to the graded, between 1.5 and 1.8 cm thick ejecta layer with totally altered impact glass spherules, which in turn is topped by Danian sediments. The porous and clayey material required elaborate preparation in order to yield reliable data. The ejecta bed shows a highly variable depletion in rare earth elements that even results in strongly subchondritic concentrations. The Ce/Ce* varies strongly (0.81–34), Ni/Cr ranges from 0.38 to 2.79. The maximum platinum group elements (PGE) concentrations are located in one LA‐spot exactly at the basis of the ejecta layer; they amount (in μg g^?1) to 0.35 (Rh), 1.64 (Pd), 2.79 (Pt), and 0.86 (Au). The Nb/Ta ratio increases in the Ma from ~10 to 35.9 toward the ejecta horizon, which itself has higher Nb, Ta, Zr, and Hf concentrations than the background sedimentation, combined with low Nb/Ta (~5–10), and low Zr/Hf (~20–30). The overall result is that alteration processes changed totally the original geochemical characteristics of this K‐Pg spherule bed. To explain the exorbitant element mobility at distances of hundreds of μm, we discuss a combination of mostly reducing redox processes and interaction with organic compounds. This study demonstrates the high potential of in‐situ analyses with high spatial resolution at complex geological materials. Moreover, our results indicate that some caution is necessary in determining the projectile type in impactites via PGE ratios.     

Constraints on the source of Cu in a submarine magmatic-hydrothermal system,Brothers volcano,Kermadec island arc

Most magmatic-hydrothermal Cu deposits are genetically linked to arc magmas. However, most continental or oceanic arc magmas are barren, and hence new methods have to be developed to distinguish between barren and mineralised arc systems. Source composition, melting conditions, the timing of S saturation and an initial chalcophile element-enrichment represent important parameters that control the potential of a subduction setting to host an economically valuable deposit. Brothers volcano in the Kermadec island arc is one of the best-studied examples of arc-related submarine magmatic-hydrothermal activity. This study, for the first time, compares the chemical and mineralogical composition of the Brothers seafloor massive sulphides and the associated dacitic to rhyolitic lavas that host the hydrothermal system. Incompatible trace element ratios, such as La/Sm and Ce/Pb, indicate that the basaltic melts from L’Esperance volcano may represent a parental analogue to the more evolved Brothers lavas. Copper-rich magmatic sulphides (Cu?>?2 wt%) identified in fresh volcanic glass and phenocryst phases, such as clinopyroxene, plagioclase and Fe–Ti oxide suggest that the surrounding lavas that host the Brothers hydrothermal system represent a potential Cu source for the sulphide ores at the seafloor. Thermodynamic calculations reveal that the Brothers melts reached volatile saturation during their evolution. Melt inclusion data and the occurrence of sulphides along vesicle margins indicate that an exsolving volatile phase extracted Cu from the silicate melt and probably contributed it to the overlying hydrothermal system. Hence, the formation of the Cu-rich seafloor massive sulphides (up to 35.6 wt%) is probably due to the contribution of Cu from a bimodal source including wall rock leaching and magmatic degassing, in a mineralisation style that is hybrid between Cyprus-type volcanic-hosted massive sulphide and subaerial epithermal–porphyry deposits.