Fabrication of synthetic calcite–muscovite rocks with variable texture — An analogue to cataclasite fabrics?

A series of large diameter calcite–muscovite aggregates has been prepared from calcite and muscovite powders, in order to gain a better understanding of how texture develops in impure carbonate rocks. The development of the microstructure and the crystallographic preferred orientation (CPO, texture) during the preparation process is described. The synthetic rocks have been fabricated from powders of calcite and muscovite by uniaxial cold-pressing at loads up to 400 MPa and subsequent hot isostatic pressing (HIPping) at pressures of 150 to 170 MPa and a temperature of 670 °C. The resulting textures and microstructures are homogeneous throughout the samples. The calcite CPO is generated by rigid body rotation and twinning during cold-pressing and is not significantly altered by recrystallization during HIPping. Grain growth during HIPping is observed in pure calcite samples, but is inhibited through high porosity and the presence of muscovite in the mixed aggregates. The preferred orientation of the calcite c-axes is found to increase with increasing uniaxial cold pressure, and to be independent of the muscovite content. The magnetic bulk susceptibility of the starting material has been changed by the formation of ferromagnetic impurities during fabrication. Comparison of the samples to natural calcite fabrics from fault zones show the potential of the experiments and fabric analyses presented to analyze and to better understand the deformation mechanisms of fault zones.     

Place‐Making Through Beer‐Drinking: A Case Study of Montana's Craft Breweries

Montana's craft brewing industry has grown astronomically in the last few decades and has spawned many breweries with local names and themes. Using Montana's craft breweries as a case study, this paper demonstrates that craft breweries play a significant role in contemporary place‐making. First, brewery and beer names are analyzed to extract several place‐based themes, and it is argued that these perpetuate a particular New West identity for the state. Then, through the lens of tourism and the quest for “authenticity,” surveys of brewery visitors are used to identify the various attractions that drinking craft beer and visiting breweries offer their patrons. Besides the taste of the beer, the local nature of breweries and their community focus prove to be an important draw for brewery visitors and provide the chance to experience the community in a more authentic way, and thus, offer an opportunity to make a meaningful connection with place. This research proves that craft breweries have become an important venue for place‐making, not only in Montana, but in other cities and states with a significant craft‐brewing industry     

Effect of temporal resolution of water level and temperature inputs on numerical simulation of groundwater–surface water flux exchange in a heavily modified urban river

Groundwater interacts with surface water features nearly in all types of landscapes. Understanding these interactions has practical consequences on the quantity and quality of water in either system, because the depletion or contamination of one of the systems will eventually affect the other one. Many studies have shown that the use of heat as natural tracer in conjunction with water level measurements is an effective method for estimating water flow (fluxes) between groundwater and surface water. A number of studies have explored the effects of spatial and temporal variability of groundwater–surface water flux exchanges using temperature and water level measurements; however, the effect of temporal resolution of water level and temperature data on estimating flux remains unexplored. Therefore, this study investigated the effect of temporal resolution of input data on temporal variation of groundwater–surface water flux exchanges. To this end, we calibrated a variably saturated two‐dimensional groundwater flow and heat transport model (VS2DH) at hourly and daily time scales using temperatures measured at multiple depths below the riverbed of the Zenne River, located at a well‐known Belgian brownfield site. Results of the study showed that the computed water flux through the streambed ranged between ?32 mm/day and +25 mm/day using the hourly model and from ?10 mm/day to ?37 mm/day using the daily model. The hourly model resulted in detecting reversal of flow direction inducing short‐term surface water flow into the streambed. However, such events were not captured if daily temperature and water level measurements were used as input. These findings have important implications for understanding contaminant mass flux and their attenuation in the mixing zone of groundwater and surface water. Copyright © 2012 John Wiley & Sons, Ltd.     

Kochi,India case study of climate adaptation to floods: Ranking local government investment options

Climate adaptation is uniquely linked to location, making it predominantly a local government and community responsibility. Despite the obligation to act, local governments are hindered by the absence of applicable guides to adaptation decision-making, especially adaptation to extreme events. In this paper, we describe a framework for prioritising adaptation options that could be locally implemented and illustrate it with a study of flooding in Kochi: a city in southern India. Unlike many demand driven, economics based studies, our new framework also incorporates non-economic dimensions of the extremes and potential adaptation options. Local knowledge is used to tackle data gaps and uncertainty related to extreme events: local experts select adaptation options that offer additional benefits besides those related to climate change. These co-benefits aid decision making under uncertainty by giving weight to community priorities. The Indian case study reveals that, risk evaluation and reduction need to be locally contextualised based on resources available, immediate community requirements, planning periods and local expert knowledge. Although there will be residual damage even after implementing selected options, we argue that, climate response will be most likely to be accepted when it also supports pressing needs.     

A “large‐eddy” approach to acoustic remote sensing of turbulent kinetic energy dissipation rate ϵ

Abstract

This paper suggests that a “large‐eddy” technique may be used to determine ?, the rate of dissipation of turbulent kinetic energy per unit mass, from measurements of the largest energy‐containing scales of the turbulent velocity field. The suggestion has been examined using vertical velocity data from a narrow‐beam acoustic Doppler profiler and also direct measurements of ? (using airfoil probes) from a microscale profiler. Initial results are encouraging, rasing the possibility of simultaneously measuring space/time continuous fields of “mean” velocity, turbulent velocity and ? with near‐standard acoustic Doppler techniques.     

Frequency and directional evaluation of the ocean data gathering program (ODGP) wave spectra at Hibernia

Abstract

The frequency and directional wave‐modelling capability of the Ocean Data Gathering Program (ODGP) deep water spectral wave model is assessed through comparison with WAVEC data gathered at Hibernia. Both qualitative and quantitative analyses indicate better agreement with observations during storms and with the wind‐driven component of the wave spectra. There is statistically poor modelling of the swell. A coherence analysis on derived wave vectors indicates that the ODGP model does not simulate geophysical variability with time‐scales less than about 30 h for overall spectral energy and less than 24 h for wave energy of frequency greater than 0.6 rad s^?1 (0.095 Hz). The signals associated with swell waves are incoherent at nearly all time‐scales.     

Relations between sinkhole density and anthropogenic contaminants in selected carbonate aquifers in the eastern United States

The relation between sinkhole density and water quality was investigated in seven selected carbonate aquifers in the eastern United States. Sinkhole density for these aquifers was grouped into high (>25 sinkholes/100 km²), medium (1–25 sinkholes/100 km²), or low (<1 sinkhole/100 km²) categories using a geographical information system that included four independent databases covering parts of Alabama, Florida, Missouri, Pennsylvania, and Tennessee. Field measurements and concentrations of major ions, nitrate, and selected pesticides in samples from 451 wells and 70 springs were included in the water-quality database. Data were collected as a part of the US Geological Survey (USGS) National Water-Quality Assessment (NAWQA) Program. Areas with high and medium sinkhole density had the greatest well depths and depths to water, the lowest concentrations of total dissolved solids and bicarbonate, the highest concentrations of dissolved oxygen, and the lowest partial pressure of CO₂ compared to areas with low sinkhole density. These chemical indicators are consistent conceptually with a conduit-flow-dominated system in areas with a high density of sinkholes and a diffuse-flow-dominated system in areas with a low density of sinkholes. Higher cave density and spring discharge in Pennsylvania also support the concept that the high sinkhole density areas are dominated by conduit-flow systems. Concentrations of nitrate-N were significantly higher (p < 0.05) in areas with high and medium sinkhole density than in low sinkhole-density areas; when accounting for the variations in land use near the sampling sites, the high sinkhole-density area still had higher concentrations of nitrate-N than the low sinkhole-density area. Detection frequencies of atrazine, simazine, metolachlor, prometon, and the atrazine degradate deethylatrazine indicated a pattern similar to nitrate; highest pesticide detections were associated with high sinkhole-density areas. These patterns generally persisted when analyzing the detection frequency by land-use groups, particularly for agricultural land-use areas where pesticide use would be expected to be higher and more uniform areally compared to urban and forested areas. Although areas with agricultural land use and a high sinkhole density were most vulnerable (median nitrate-N concentration was 3.7 mg/L, 11% of samples exceeded 10 mg/L, and had the highest frequencies of pesticide detection), areas with agricultural land use and low sinkhole density still were vulnerable to contamination (median nitrate-N concentration was 1.5 mg/L, 8% of samples exceeded 10 mg/L, and had some of the highest frequencies of detections of pesticides). This may be due in part to incomplete or missing data regarding karst features (such as buried sinkholes, low-permeability material in bottom of sinkholes) that do not show up at the scales used for regional mapping and to inconsistent methods among states in karst feature delineation.     

Perspectives on being a field-based geomorphologist during pregnancy and early motherhood

Many geomorphologists who are mothers find it challenging to balance field research alongside pregnancy and caring for young children. We offer perspectives on the challenges to conducting fieldwork as mothers and possible solutions, as a means of promoting conversations and highlighting issues that are less commonly considered in field-based geomorphic research. Although every mother's experience and needs are different, we discuss strategies for conducting fieldwork, addressing childcare issues, and dealing with financial considerations. We call for our community to support geomorphologists who are pregnant or caring for young children in carrying out fieldwork to help enhance the diversity of voices and perspectives within our discipline.     

Direct impacts of commercial and recreational fishing on spiny lobster,Panulirus interruptus,populations at Santa Catalina Island,California, United States

The California spiny or red rock lobster, Panulirus interruptus, is an ecologically and economically important species that has been exploited since the 1800s. No previous study in California has assessed the impacts of the recreational or commercial lobster harvest. Before the 2003–04 commercial and recreational lobster seasons, we conducted a fishery‐independent trap survey at Santa Catalina Island to document the impact of the lobster fisheries on the size structure, abundance, and sex ratios of mature P. interruptus (>65 mm carapace length (CL)). We concurrently sampled a predominantly commercially fished area, a recreationally fished area, and a 23‐year‐old invertebrate no‐take (INT) reserve. Relative to the INT reserve, legal‐size lobsters in the recreational area were similar in CL, but 31% less abundant. Legal‐size lobsters in the commercial area were 8% smaller and 70% less abundant than those in the INT reserve. The sex ratio of legal‐size lobsters, although near 50:50 in the recreational and INT reserve areas, was male‐dominated (67:33) in the commercial area. Differences in CPUE and mean CL of sub‐legal lobsters in the recreational and commercial areas suggest that factors in addition to harvesting pressure may affect these populations. Total biomass of mature lobsters in the recreational and commercial areas was 92% and 45%, respectively, of biomass in the INT reserve. Fecundity in the recreational and commercial areas was 83% and 42%, respectively, of fecundity in the INT reserve. This study provides preliminary data for future ecological studies and fisheries management evaluations.     

Hydrothermal mineralization along submarine rift zones,Hawaii

This is the first article to describe mineralization of midplate submarine rift zones and hydrothermal manganese oxide mineralization of midplate volcanic edifices. Hydrothermal Mn oxides were recovered from submarine extensions of two Hawaiian rift zones, along Haleakala and Puna Ridges. These Mn oxides form two types of deposits, metallic stratiform layers in volcaniclastic rocks and cement for clastic rocks; both deposit types are composed of todorokite and bimessite. Thin Fe‐Mn crusts that coat some rocks formed by a combination of hydrogenetic and hydrothermal processes and are composed of δ‐MnO₂. The stratiform layers have high Mn contents (mean 40%) and a large fractionation between Mn and Fe (Fe/Mn = 0.04). Unlike most other hydrothermal Mn oxide deposits, those from Hawaiian rift zones are enriched in the trace metals Zn, Co, Ba, Mo, Sr, V, and especially Ni (mean 0.16%). Metals are derived from three sources: mafic and ultramafic rocks leached by circulating hydrothermal fluids, clastic material (in Mn‐cemented sandstone), and seawater that mixed with the hydrothermal fluids. Mineralization on Haleakala Ridge occurred sometime during the past 200 to 400 ka, when the summit was at a water depth of more than 1,000 m. Hydrothermal circulation was probably driven by heat produced by intrusion of dikces, magma reservoirs, and flow of magma through axial and lateral conduits. The supply of seawater to ridge interiors must be extensive because of their high porosity and permeability. Precipitation of Mn oxide below the seafloor is indicated by its occurrence as cement, growth textures that show mineralizing fluids were introduced from below, and pervasive replacement of original matrix of clastic rocks.