Soil bentonite wall protects foundation from thrust faulting: analyses and experiment

When seismic thrust faults emerge on the ground surface,they are particularly damaging to buildings,bridges and lifelines that lie on the rupture path.To protect a structure founded on a rigid raft,a thick diaphragm-type soil bentonite wall(SBW) is installed in front of and near the foundation,at sufficient depth to intercept the propagating fault rupture.Extensive numerical analyses,verified against reduced–scale(1 g) split box physical model tests,reveal that such a wall,thanks to its high deformability and low shear resistance,"absorbs" the compressive thrust of the fault and forces the rupture to deviate upwards along its length.As a consequence,the foundation is left essentially intact.The effectiveness of SBW is demonstrated to depend on the exact location of the emerging fault and the magnitude of the fault offset.When the latter is large,the unprotected foundation experiences intolerable rigid-body rotation even if the foundation structural distress is not substantial.     

Anisotropy beneath Hawaii from surface wave particle motion observations

Observed polarization ellipses for fundamental-mode surface waves observed at a digital station in Hawaii deviate from those expected for isotropic models of crust and mantle structure for that region. The anomalous motion occurs as rotations of the ellipse about all three axes in a cartesian corrdinate system. The largest and most consistent deviations occur as anomalous slopes of the ellipse about the horizontal axis transverse to the direction of propagation.The observed orientations and magnitudes of these angles can be explained by models of the upper mantle which contain olivine for which thea-axis dips significantly from the horizontal and which includes a sufficiently thick sedimentary layer (1 km) and a thicker than normal oceanic crust (15 km). The ellipses are also generally inclined from great circle paths about the vertical axis and are tilted about the axis aligned with the propagation direction. Both angles are small and difficult to measure, but the inclination angles are consistent with a model of the upper mantle in which thea-axis of olivine is preferentially oriented in an east-west direction.     

The motion of an emission-line region near the center of the galaxy NGC 4151

Possible orbits for the motion of a region in the gravitational field of the central body of the galaxy NGC 4151 are presented. The region is manifest through its line emission, observed in the red wing of the Hα, Pβ, and other broad lines. We carried out a computer selection of all Keplerian orbits for which the measured radial velocities of the emission-line region could be observed. We used radial-velocity data obtained by us at the Fesenkov Astrophysical Institute, as well as data from the literature. The computation results can be used to determine the mass range for the central body of NGC 4151 that provides the best agreement with the observational data: (61–65)× 10⁶ M _⊙. Suitably designed monitoring of active galactic nuclei can be used to verify these results, and to carry out similar analyses for other Seyfert galaxies.     

Bericht über die Tagung der Meteorologischen Gesellschaft bad Kissingen vom 1. bis 3. Oktober 1949

Ohne Zusammenfassung     

Practical Incorporation of Multivariate Parameter Uncertainty in Geostatistical Resource Modeling

There is a need to bridge theory and practice for incorporating parameter uncertainty in geostatistical simulation modeling workflows. Simulation workflows are a standard practice in natural resource and recovery modeling, but the incorporation of multivariate parameter uncertainty into those workflows is challenging. However, the objectives can be met without considerable extra effort and programming. The sampling distributions of statistics comprise the core theoretical notion with the addition of the spatial degrees of freedom to account for the redundancy in the spatially correlated data. Prior parameter uncertainty is estimated from multivariate spatial resampling. Simulation-based transfer of prior parameter uncertainty results in posterior distributions which are updated by data conditioning and the model domain extents and configuration. The results are theoretically tractable and practical to achieve, providing realistic assessments of uncertainty by accounting for large-scale parameter uncertainty, which is often the most important component impacting a project. A simulation-based multivariate workflow demonstrates joint modeling of intrinsic shale properties and uncertainty in estimated ultimate recovery in a shale gas project. The multivariate workflow accounts for joint prior parameter uncertainty given the current well locations and results in posterior estimates on global distributions of all modeled properties. This is achieved by transferring the joint prior parameter uncertainty through conditional simulations.     

Wiener optimal filtering of GRACE data

We present a spatial averaging method for Gravity Recovery and Climate Experiment (GRACE) gravity-field solutions based on the Wiener optimal filtering. The optimal filter is designed from the least-square minimization of the difference between the desired and filtered signals. It requires information about the power spectra of the desired gravitational signal and the contaminating noise, which is inferred from the average GRACE degree-power spectrum. We show that the signal decreases with increasing spherical harmonic degree j with approximately j^−b, where b = 1.5 for GRACE data investigations. This is termed the Second Kaula rule of thumb for temporal variations of the Earth’s gravity field. The degree power of the noise increases, in the logarithmic scale, linearly with increasing j. The Wiener optimal filter obtained for the signal model with b = 1.5 closely corresponds to a Gaussian filter with a spatial half width of 4° (∼440 km). We find that the filtered GRACE gravity signal is relatively insensitive to the exponent b of the signal model, which indicates the robustness of Wiener optimal filtering. This is demonstrated using the GFZ-GRACE gravity-field solution for April 2004.     

Modeling of circulation and salinity in Hooghly estuary

The circulation and salinity distribution in the Hooghly Estuary have been studied by developing a two‐dimensional depth‐averaged numerical model for the lower estuary, where the flow is vertically well mixed. This has been coupled with a one‐dimensional model for the upper estuary, where the flow is assumed to be unidirectional and well mixed over the depth and breadth. The Hooghly River receives high freshwater discharge during the monsoon season (June to September), which has significant effect on the salinity distribution in the estuary. The model‐simulated currents, elevations, and salinities are in good agreement with observations during the dry season. However, during the wet season the computed salinities seem to deviate slightly from the observed values.     

Problems associated with direct displacement-based design of concrete bridges with single-column piers, and some suggested improvements

Currently available displacement-based design (DBD) procedures for bridges are critically evaluated with a view to identifying extensions and/or modifications of the procedure, for it to be applicable to final design of a fairly broad class of bridges. An improved direct DBD procedure is presented, including a suite of comprehensive design criteria and proper consideration of the degree of fixity of the pier top. The design of an overpass bridge (originally designed to a current European Code), applying the improved ‘direct’ displacement-based design (DDBD) procedure is presented and both ‘conventional’ and displacement-based designs are assessed using non-linear response-history analysis (NLRHA); comparisons are made in terms of both economy and seismic performance of the different designs. It is seen that DDBD provided a more rational base shear distribution among piers and abutments when compared to the force-based design procedure and adequately captured the displacement pattern, closely matching the results of the more rigorous NLRHA.     

Thermal and exhumation history of the central Rwenzori Mountains, Western Rift of the East African Rift System, Uganda

The Rwenzori Mountains (Mtns) in west Uganda are the highest rift mountains on Earth and rise to more than 5,000 m. We apply low-temperature thermochronology (apatite fission-track (AFT) and apatite (U–Th–Sm)/He (AHe) analysis) for tracking the cooling history of the Rwenzori Mtns. Samples from the central and northern Rwenzoris reveal AFT ages between 195.0 (±8.4) Ma and 85.3 (±5.3) Ma, and AHe ages between 210.0 (±6.0) Ma to 24.9 (±0.5) Ma. Modelled time–temperature paths reflect a protracted cooling history with accelerated cooling in Permo-Triassic and Jurassic times, followed by a long period of constant and slow cooling, than succeeded by a renewed accelerated cooling in the Neogene. During the last 10 Ma, differentiated erosion and surface uplift affected the Rwenzori Mtns, with more pronounced uplift along the western flank. The final rock uplift of the Rwenzori Mtns that partly led to the formation of the recent topography must have been fast and in the near past (Pliocene to Pleistocene). Erosion could not compensate for the latest rock uplift, resulting in Oligocene to Miocene AHe ages.     

Facies Structure and Quantitative Parameters of Pleistocene Sediments of the Bering Sea

Lithofacies zoning is described for the first time for the Neo- and Eopleistocene of the Bering Sea. Four lithofacies sedimentation zones are distinguished: (I) terrigenous; (II) siliceous–terrigenous; (III) siliceous, and (IV) volcanoterrigenous ones. Corresponding maps were treated using Ronov volumetric method to quantify sedimentation parameters for distinguished lithofacies zones (subzones) and types of Pleistocene sediments. It was revealed that terrigenous sediments predominate over other sediments. Accumulation of the terrigenous sediments was more intense (by 1.4 times) in the Neopleistocene than in the Eopleistocene. The sedimentation rate of siliceous sediments of the Bowers Ridge in the Eopleistocene was two times higher than in the Neopleistocene.