Soil characterization based on land cover heterogeneity over a tropical landscape: an integrated approach using earth observation data-sets

Soil is a vital part of the natural environment and is always responding to changes in environmental factors, along with the influences of anthropogenic factors and land use changes. The long-term change in soil properties will result in change in soil health and fertility, and hence the soil productivity. Hence, the main aim of this paper focuses on the analysis of land use/land cover (LULC) change pattern in spatial and temporal perspective and to present its impact on soil properties in the Merawu catchment over the period of 18?years. Post classification change detection was performed to quantify the decadal changes in historical LULC over the periods of 1991, 2001 and 2009. The pixel to pixel comparison method was used to detect the LULC of the area. The key LULC types were selected for investigation of soil properties. Soil samples were analysed in situ to measure the physicochemical soil properties. The results of this study show remarkable changes in LULC in the period of 18?years. The effect of land cover change on soil properties, soil compaction and soil strength was found to be significant at a level of <0.05.     

Crop Residue Discrimination Using Ground-Based Hyperspectral Data

Crop residue has become an increasingly important factor in agriculture management. It assists in the reduction of soil erosion and is an important source of soil organic carbon (soil carbon sequestration). In recent past, remote sensing, especially narrowband, data have been explored for crop residue assessment. In this context, a study was carried out to identify different narrow-bands and evaluate the performance of SWIR region based spectral indices for crop residue discrimination. Ground based hyperspectral data collected for wheat crop residue was analyzed using Stepwise Discriminant Analysis (SDA) technique to select significant bands for discrimination. Out of the seven best bands selected to discriminate between matured crop, straw heap, combine-harvested field with stubbles and soil, four bands were from SWIR (1980, 2030, 2200, 2440 nm) region. Six spectral indices were computed, namely CAI, LCA, SINDRI, NDSVI, NDI5 and hSINDRI for crop residue discrimination. LCA and CAI showed to be best (F?>?115) in discriminating above classes, while LCA and SINDRI were best (F?>?100) among all indices in discriminating crop residue under different harvesting methods. Comparison of different spectral resolution (from 1 nm to 150 nm) showed that for crop residue discrimination a resolution of 100 nm at 2100–2300 m region would be sufficient to discriminate crop residue from other co-existing classes.     

Geospatial Technologies for National Geomorphology and Lineament Mapping Project – A Case Study of Goa State

A three level classification system, based on the genesis of landforms, was used to map the geomorphology of the Goa state. The first level corresponds to the process that was responsible for landform generation, the second level or the intermediate level was assigned based on the morphography, and the third level corresponds to the individual landforms units identified based on the morphostructure. The mapping was carried out using IRS-P6 LISS-III (23.5 m) satellite image as the primary data source. Ancillary data such as geological map, topographic map, digital elevation model (DEM), field data collected by global positioning system (GPS) and web portals for image visualisation, were also used for the mapping purpose. A new software designed for mapping landforms based on the genesis, was used in this study to create a seamless geomorphology and lineament database of the Goa state in a GIS environment. A total of 58 landforms within six types of genetic classes were mapped in this area. Similarly, structural and geomorphic lineaments were also delineated using the satellite data. The database created has multi-purpose usability such as environmental studies, mining activity assessment, coastal zone management and wasteland development, since the classification system used is focused on processes, not theme specific.     

Land use/land cover dynamics in Umngot watershed of Meghalaya using geospatial tools

Meghalaya is a landlocked state where the progress of industrialization is very slow. Majority of the population (rural) depends on agriculture. Agriculture in the state is carried on in primitive ways with Jhumming prevailing in many parts. This practice is considered destructive as vast forest areas are cleared and burnt. Such areas are used for cultivation and left out. After a gap of few years (2–3 years as of now and 15–20 years in past) the area is revisited for cultivation without allowing to rejuvenate. The present work provides a status and trend of Land use land cover dynamics in parts (at watershed level) of Meghalaya. The geospatial tools have been used to assess (a) the changes in land use land cover since 1970s to 2005; (b) patch dynamics for understanding the degree of fragmentation; (c) changes along the terrain topography. Umngot watershed of Meghalaya is taken as experimental area, which is a representative of mid-altitudinal watershed particularly in the Jaintia hills district of Meghalaya.     

Classical globally reflected gravity field determination in modern locally oriented multiscale framework

The purpose of this paper is the canonical connection of classical global gravity field determination following the concept of Stokes (Trans Camb Philos Soc 8:672–712, 1849), Bruns (Die Figur der Erde, Publikation Königl. Preussisch. Geodätisches Institut, P. Stankiewicz Buchdruckerei, Berlin, 1878), and Neumann (Vorlesungen über die Theorie des Potentials und der Kugelfunktionen. Teubner, Leipzig, pp 135–154, 1887) on the one hand and modern locally oriented multiscale computation by use of adaptive locally supported wavelets on the other hand. The essential tools are regularization methods of the Green, Neumann, and Stokes integral representations. The multiscale approximation is guaranteed simply as linear difference scheme by use of Green, Neumann, and Stokes wavelets. As an application, gravity anomalies caused by plumes are investigated for the Hawaiian and Iceland areas.     

A hierarchical model for estimating methane emission from wetlands using MODIS data and ARIMA modeling

A three-step hierarchical Semi Automated Empirical Methane Emission Model (SEMEM) has been used to estimate methane emission from wetlands and waterlogged areas in India using Moderate Resolution Imagine Spectroradiometer (MODIS) sensor data onboard Terra satellite. Wetland Surface Temperature (WST), methane emission fluxes and wetland extent have been incorporated as parameters in order to model the methane emission. Analysis of monthly MODIS data covering the whole of India from November 2004 to April 2006 was carried out and monthly methane emissions have been estimated. Interpolation techniques were adopted to fill the data gaps due to cloudy conditions during the monsoon period. AutoRegressive Integrated Moving Average (ARIMA) model has been fitted to estimate the emitted methane for the months of May 2006 to August 2006 using SPSS software.     

Advances in understanding of the mechanism for generation of earthquake thermal precursors detected by satellites

Stresses building up during an earthquake preparation phase also manifest themselves in the form of a so called increased land surface temperature (LST) leading to a thermal precursor prior to the earthquake event. This phenomenon has now been validated by our observations of short-term thermal anomalies detected by infrared satellite sensors for several recent past earthquakes around the world. The rise in infrared radiance temperature was seen to vary between 5 and 12 °C for different earthquakes. We discuss in this paper different explanations for the generation of such anomalies that have been offered. Emission of gases due to the opening and closure of micropores upon induced stresses and also the participation of ground water have been propounded as a possible cause for generation of thermal anomalies. Seismo-ionosphere coupling, by which gases like radon move to the earth–atmosphere interface and cause air ionization thus bringing about a change in air temperature, relative humidity, etc., has been put forth by some workers. A mechanism of low frequency electromagnetic emission was tested and experimented by scientists with rock masses in stressed conditions as those that exist at tectonic locations. The workers proposed the positive hole pair theory, which received support from several scientific groups. Positive holes (sites of electron deficiency) are activated in stressed rocks from pre-existing yet dormant positive hole pairs (PHPs) and their recombination at rock–air interface leads to a LST rise. A combination of remote sensing detection of rock mechanics behavior with a perception of chemistry and geophysics has been applied to propose the remote sensing rock mechanics theory. Remote sensing detections of such anomalies confirm so far proposed lab theories for such a hotly debated field as earthquake precursor study by providing unbiased observations with consistency in time and space distribution.     

An approach to aid INS using time-differenced GPS carrier phase (TDCP) measurements

This paper presents a simple and effective approach that incorporates single-frequency, L1 time-differenced GPS carrier phase (TDCP) measurements without the need of ambiguity resolution techniques and the complexity to accommodate the delayed-state terms. Static trial results are included to illustrate the stochastic characteristics and effectiveness of the TDCP measurements in controlling position error growth. The formulation of the TDCP observation model is also described in a 17-state tightly-coupled GPS/INS iterative, extended Kalman filter (IEKF) approach. Preliminary land vehicle trial results are also presented to illustrate the effectiveness of the TDCP which provides sub-meter positional accuracies when operating for more than 10 min.     

Urban cadastral mapping using very high resolution remote sensing data

With growing urban expanses, one of the pre-requisites for effective governance is Urban Information Systems (UIS) with content down to individual properties (and individuals). The basic input i.e., a map, in UIS should show individual property boundaries showing the plan outline of all structures existing within, at a scale of 1:1000 and larger with sub-metre to centimeters planimetric and geometric accuracy. With very high resolution remote sensing data of the order of 1m available in hand, it is possible to prepare maps with high resolution spatial content. The present exercise demonstrates a method of preparing a geometrically and planimetrically accurate urban cadastral map on very large scale for a small area of about 5 sq km. IKONOS merged data with 1m resolution is used for the purpose. Mapping was done in conjunction with on-site measurements and sketches. Guides are used to maintain shape symmetry and accuracy of buildings and other features. Working out cost of mapping per unit area is another objective in the present exercise. For want of fully or semi-automatic methods of information extraction from very high resolution remote sensing data, it is imperative that mapping should be carried out in conjunction with some on-site measurements wherever necessary.     

Generation and validation of DEM using SAR interferometry and differential GPS supported by multispectral optical data

Digital elevation model (DEM) and the derived terrain parameters e.g. contour, slope, aspect, drainage pattern, etc are required for natural resources management, infrastructure planning and disaster management. The present paper aims at generating DEM from ERS tandem pair using interferometric technique supported by differential GPS measurements (DGPS) and multispectral optical data. Validation of DEM has been carried out by DGPS measurements. Ground Control Points (GCP) established by DGPS measurements have been used to georeference the IRS-1D optical data that has finally been co-registered with SAR amplitude image. Optical data, co-registered with ERS - I SAR data has helped in locating the GCP’s and check points, precisely, for refinement of DEM and its validation.