Salt Diapirs, Salt Brine Seeps, Pockmarks and Surficial Sediment Creep and Slides in the Canary Channel off NW Africa

Circular to elliptical mounds in the Canary Channel with reliefs of 75 to 375 m and diameters of 4 to 8 km partially surrounded by moats with reliefs of 25 to 75 m, were formed by piercement of the seafloor by Mesozoic evaporites. Several long gullies, < 1km wide, with abrupt terminations and pockmarks associated with these mounds were probably eroded by dense brine and hydrocarbon seeps. The salt brines that eroded the gullies were formed where salt diapirs intersect the seafloor, or in the subsurface by circulating ground water heated by igneous activity along the Canary Ridge. If the brines originated in the subsurface they reached the seafloor along faults. Displacement of the surficial sediments by sliding and creep is probably the result of the expulsion of hydrocarbons and/or vertical motion of the Mesozoic evaporites. Microtopographic features along or near the east flank of the Canary Ridge are the creation of uplift of the ridge, hydrothermal activity, mass wasting processes and turbidity currents.     

Phototoxicity of pyrene and benzo[a]pyrene to embryo-larval stages of the Pacific oyster Crassostrea gigas

There is a growing body of evidence to suggest that certain polycyclic aromatic hydrocarbons (PAHs) pose a greater hazard to aquatic organisms than previously demonstrated, due to their potential to cause photo-induced toxicity when exposed to ultraviolet (UV) radiation. The consequences of photo-induced toxicity are reported here for embryo-larval stages of the pacific oyster Crassostrea gigas, following exposure to pyrene and benzo[a]pyrene. During laboratory investigations, significant increases in toxicity were observed in the presence of environmentally attainable levels of UV-radiation, compared with embryos exposed to PAH alone, at levels previously deemed to have little acute biological effect. The phototoxicity of pyrene and benzo[a]pyrene completely inhibited the development to the D-shell larval stage when embryos were simultaneously exposed to 5 microg l(-1) PAH and ultraviolet light (UVB = 6.3 +/- 0.1 microW/cm2 and UVA = 456.2 +/- 55 microW/cm2). A linear relationship was also demonstrated for benzo[a]pyrene phototoxicity with decreasing UV light intensity.     

Cycling the representer algorithm for variational data assimilation with a nonlinear reduced gravity ocean model

The representer method was used by [Ngodock, H.E., Jacobs, G.A., Chen, M., 2006. The representer method, the ensemble Kalman filter and the ensemble Kalman smoother: a comparison study using a nonlinear reduced gravity ocean model. Ocean Modelling 12, 378–400] in a comparison study with the ensemble Kalman filter and smoother involving a 1.5 nonlinear reduced gravity idealized ocean model simulating the Loop Current (LC) and the Loop Current eddies (LCE) in the Gulf of Mexico. It was reported that the representer method was more accurate than its ensemble counterparts, yet it had difficulties fitting the data in the last month of the 4-month assimilation window when the data density was significantly decreased. The authors attributed this failure to increased advective nonlinearities in the presence of an eddy shedding causing the tangent linear model (TLM) to become inaccurate. In a separate study [Ngodock, H.E., Smith, S.R., Jacobs, G.A., 2007. Cycling the representer algorithm for variational data assimilation with the Lorenz attractor. Monthly Weather Review 135 (2), 373–386] applied the cycling representer algorithm to the Lorenz attractor and demonstrated that the cycling solution was able to accurately fit the data within each cycle and beyond the range of accuracy of the TLM, once adjustments were made in the early cycles, thus overcoming the difficulties of the non-cycling solution. The cycling algorithm is used here in assimilation experiments with the nonlinear reduced gravity model. It is shown that the cycling solution overcomes the difficulties encountered by the non-cycling solution due to a limited time range of accuracy of the TLM. Thus, for variational assimilation applications where the TLM accuracy is limited in time, the cycling representer becomes a very powerful and attractive alternative, given that its computational cost is significantly lower than that of the non-cycling algorithm.     

Thermohydrodynamics of the ocean decay of nonlinear oscillations in a bounded basin of variable depth

We study the time decay of surges of a liquid in a round shallow-water basin of variable depth. The dependence of the logarithmic decrement of oscillations on the bottom topography and wind velocity is analyzed. The role of convective acceleration and bottom friction in the formation of both the level of vertical displacement of the surface of the basin and the velocity field of horizontal wave currents is estimated. __________ Translated from Morskoi Gidrofizicheskii Zhurnal, No. 2, pp. 3–11, March–April, 2006.     

GEBCO Centennial Special Issue – Charting the Secret World of the Ocean Floor: The GEBCO Project 1903–2003

This special issue of Marine Geophysical Researches presents five papers dealing with GEBCO, the General Bathymetric Chart of the Oceans, which celebrated its Centennial in April 2003, hosted by the International Hydrographic Bureau and the Principality of Monaco. Over the past 103 years GEBCO has been the sole body dedicated to compiling all available data to produce standardized maps of the oceans and seas covering 71% of planet Earth. Over time GEBCO has undergone a complete transformation as sparse 500 m contours on paper charts were replaced by digital grids with ever-increasing resolution. The 2003 Centennial saw the release on two CDROMS with the first global 1′ grid, produced by methods unheard of in 1984, when GEBCO’s last 6th Edition paper chart set was published. In GEBCO’s second century, the thrust is towards global grids that will capture the resolutions available with evolving deep-water swath mapping technologies, as well as vast improvement in the details of the shallow continental shelves that have traditionally been the preserve of the hydrographic community. As little more than 10% of the oceans have been mapped to the desired level of detail, there is much to be done. However refinements in satellite altimetry appear to offer an interim stop-gap as more multi-beam sonars ply the oceans and as the littoral countries of the world map their adjacent marine areas for submission under Article 76 of UNCLOS (United Nations, 1983, 1999). In addition GEBCO is becoming increasingly proactive, with outreach to the public via the internet and a new GEBCO Map of the World, active data-scrounging, and encouraging development of the first drifting buoys for acquiring data in the inaccessible areas of the Antarctic, SW Pacific, and Arctic Oceans.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Shoreline variability via empirical orthogonal function analysis: Part I temporal and spatial characteristics

Empirical orthogonal functions (EOFs) or principal components were used to extract the significant modes of shoreline variability from several data sets collected at three very different locations. Although EOFs have proven to be a valuable tool in the analysis of nearshore data, most applications have focused on the ability of the technique to describe cross-shore or profile variability. Here however, EOFs were used to help identify the dominant modes of longshore shoreline variability at Duck, North Carolina, the Gold Coast, Australia, and at several locations within the Columbia River Littoral Cell in the U.S. Pacific Northwest. In part one of this analysis, characteristic patterns of shoreline variability identified by the EOF analysis are described in detail. At each site, the dominant modes consisting of the first four eigenfunctions were found to describe nearly 95% of the total shoreline variability. At both Duck and the Gold Coast, several interesting longshore periodic features suggestive of sand waves were identified, while boundary effects related to natural headlands and navigational structures/entrances dominated the Pacific Northwest data sets.     

Time domain modelling of the transient asymmetric flooding of Ro-Ro ships

This work aims at contributing to improve knowledge on transient asymmetric flooding through theoretical and experimental research. First, a time domain theoretical model of ship motions and flooding is described. Results from experimental work are presented evidencing that transient asymmetric flooding may cause the capsizing of a Ro-Ro shaped barge. The theoretical model is used to predict the capsize of the Ro-Ro shaped barge. Reasonable agreement between experimental and theoretical results was found. Finally, a review of the European Gateway accident is given and the theoretical model is applied to the study of this type of accident. The conclusion is that this theoretical model, together with an accurate modelling of the flooding of machinery compartments, reproduces successfully the capsizing of the European Gateway due to transient asymmetric flooding. Therefore, the internal arrangement of Ro-Ro ships should be carefully studied at the design stage in order to avoid this phenomenon.     

Magmatic evolution of the provinces of the Pacific Ocean floor

Based on the summarized geological and petrogeochemical information on the basaltic magmatism on the Pacific Ocean floor, the formation-geochemical rock types, their associations in the oceanic morpho-structures, and petrological provinces were distinguished. The features of the composition variations of the rocks presented mainly by magno-and ferrotholeiites in mid-oceanic ridges and by their petrological analogues at the plates (Fenner trend) were examined. The increase in the silica acidity and alkalinity of the rocks (Bowen trend) is moderately manifested in the eastern provinces of the ocean and is much more pronounced in the western areas (including the formation of complexes constituted by significant volumes of alkaline rocks).