Wave forces on submarine pipelines near a plane boundary

Forces induced by regular waves on submarine pipelines resting on as well as near a plane boundary and aligned parallel to wave fronts of the oncoming waves are investigated experimentally. The inline hydrodynamic coefficients of drag and inertia are evaluated through the use of Morison equation and the least squares method. The transverse force is analysed in terms of maximum transverse force and transverse root mean square (r.m.s.) coefficients. The resulting inline and transverse hydrodynamic coefficients are correlated with the period parameter or Keulegan-Carpenter number and relative clearance of the pipeline from the plane boundary. The effect of depth parameter on these coefficients and the correlation between maximum transverse force and transverse r.m.s. coefficients are also reported.     

Analytical and experimental investigation on vibrating rectangular plates with two opposite free edges and internal supports while the remaining are elastically restrained against rotation

This paper deals with the determination of an approximate fundamental frequency equation for a rectangular plate with two edges (y = 0, b) elastically restrained against rotation while the edges x=0, a are free but internal supports parallel to the free edges are present in the structural system. The algorithmic procedure can be easily implemented on a micro computer or even a hand, programmable calculator.Good engineering agreement with experimental results is shown to exist in the case of a plate with edges y=0,b rigidly clamped.     

Study of the fauna inhabiting the holdfasts of Laminaria hyperborea (gunn.) fosl. along some environmental and geographical gradients

A survey of the holdfast fauna of Laminaria hyperborea was carried out at thirty-five sites around the UK, mostly along the North Sea and south coasts.Data from different age classes of holdfast from a polluted and unpolluted site indicate that volume of holdfast space is a most important measurement of sample size, a minimum size of sample being one litre and, preferably, three.Gradients of increased heavy metals were defined down the North Sea and west coasts and, by utilising measurements of kelp penetration, water clarity gradients were determined as increasing northwards on the west coast and both north and southwards on the North Sea coast from a point near Tyne and Wear county. Analysis of holdfast fauna showed numerous gradients of total numbers, species and diversity which correlate closely with the heavy metal and water clarity gradients, or with undetermined parameters analogous to latitude and longitude. Where there were increases of heavy metals or decreases of water clarity, various reciprocal relationships between suspension feeders and all other trophic groups were commonly observed. In the North Sea numbers of suspension feeders increased while numbers of all other trophic groups declined. On the west coast a heavy metal increase correlated with a decreasing species richness of all trophic categories except suspension feeders, while with total numbers only suspension feeders showed an increase. On the south coast transect neither gradient existed, and only here did all trophic categories covary, except at one very polluted site where the same reciprocal relationship was again indicated.In terms of species similarity the North Sea showed a greater pool of common species than occurred between sites of other regions and between North Sea sites with other regions, despite the widest range of heavy metal levels and wate clarity that existed there. Between-site similarity appeared to be much more dependent on geographical proximity than on the two measured environmental factors. It is suggested that effects of clarity-reduction can be measured by trophic analysis more successfully than by species presence or absence, and that changes of holdfast fauna along the North Sea coast are due largely to pollution.     

A Pull-Up Shallow Water Seismometer

An inexpensive Pull-Up Shallow Water Seismometer (PUSS) has been designed and built to conduct long range seismic refraction experiments in the North Sea and the continental shelf around Britain, with the particular goal of studying the crustal and lithospheric structure under the epeirogenic basin of the North Sea. Signals from a gimbal-mounted 3-component geophone and a hydrophone are frequency modulated and mixed with clock and flutter correction signals before being recorded on a standard speed cassette tape recorder, with one hour of recording time. A 100 hour programmable timer allows the interval between the time of reset of the clock and each shot window of optional 5 or 10 min duration, to be preselected. The PUSS is launched and recovered using a pull-up technique originally developed for current meters. The replay system is also described.In May 1976 sea trials of 5 PUSSes were conducted along a 200 km refraction line in the North Sea. The encouraging performance of the equipment resulted in the decision to build a further 10 units and to proceed with a 400 km refraction line planned for the summer of 1977.     

Geophysical Evidence of a Relict Oceanic Crust in the Southwestern Scotia Sea

The southwestern part of the Scotia Sea, at the corner of the Shackleton Fracture Zone with the South Scotia Ridge has been investigated, combining marine magnetic profiles, multichannel seismic reflection data, and satellite-derived gravity anomaly data. From the integrated analysis of data, we identified the presence of the oldest part of the crust in this sector, which tentative age is older than anomaly C10 (28.7 Ma). The area is surrounded by structural features clearly imaged by seismic data, which correspond to gravity lows in the satellite-derived map, and presents a rhomboid-shaped geometry. Along its southern boundary, structural features related to convergence and possible incipient subduction beneath the continental South Scotia Ridge have been evidenced from the seismic profile. We interpret this area, now located at the edge of the south-western Scotia Sea, as a relict of ocean-like crust formed during an earlier, possibly diffuse and disorganized episode of spreading at the first onset of the Drake Passage opening. The successive episode of organized seafloor spreading responsible for the opening of the Drake Passage that definitively separated southern South America from the Antarctic Peninsula, instigated ridge-push forces that can account for the subduction-related structures found along the western part of the South Scotia Ridge. This seafloor accretion phase occurred from 27 to about 10 Ma, when spreading stopped in the western Scotia Sea Ridge, as resulted from the identification of the marine magnetic anomalies.     

Implementation of an expert system for the design of single-point, subsurface oceanographic moorings

The design of single-point, subsurface moorings is carried out a present by a design engineer with the help of some computer programs. These computer programs are used for analyzing the mooring, but the setting-up of the initial mooring configuration and the subsequent modifications on the basis of the results of the analysis are carried out by the design engineer.An expert system for mooring design is developed to eliminate the human expert from the design process and thus to enable a novice to design a mooring by himself. Using the expert system, an optimum least-weight in air design can be developed in much less time than is usually required in conventional procedures. Perhaps the most significant advantage is that the system can serve as a vehicle for effective transfer of present day expertise for future applications.The system is developed and implemented on an IBM PC/AT. It has a user-friendly, interactive, menu-driven input procedure and a sophisticated output facility. The design process is totally automated and the requirement to consult a human expert is easily eliminated. The system has tremendous flexibility and a knowledge engineer can easily adapt it to the specific requirements of a particular user. The concept of machine learning is introduced by recording the failure data and using this information in the later decision-making processes. A CAD package, AUTOCAD, is used to generate the drawings and an interface is developed between the CAD package and the expert system so that the former is transparent to the user.     

JONSWAP's parameters: Sorting out the inconsistencies

The original prognostic equations for the JONSWAP-spectrum contained inconsistencies. A subsequent paper (Hasselmann et al., 1976, J. phys. Oceanogr.6, 200–208) attempted to regularise the situation. This paper shows that there were still inconsistencies in the prognostic equations giving overestimations of the first moment of the spectrum and consequently the significant wave height. The prognostic equations are reworked systematically and results presented. It is shown that variable σ_a, σ_b and γ must be used to achieve consistent results     

Study of fluoride in polluted and unpolluted estuarine environments

Mindhola River estuary, which receives industrial waste containing high concentrations of fluoride, and Purna River estuary, which is free from fluoride contamination, have been investigated. While fluoride behaved conservatively in Purna River estuary, significant deviation from the theoretical dilution line (TDL) in the chlorinity range 0·5–8‰ was observed in Mindhola River estuary due to the externally added fluoride which largely remained in solution. The excess of fluroide over the theoretically calculated value was at a maximum around a chlorinity of 3‰. High natural fluoride content of the river waters resulted in F/Cl ratios exceeding 300 × 10⁻⁵ at low chlorinities. The ratio decreased rapidly with increasing chlorinity and the value near to that of seawater was observed at chlorinities above 14‰.     

Geoacoustic and physical properties of carbonate sediments of the Lower Florida Keys

 Near-surface sediment geoacoustic and physical properties were measured from a variety of unconsolidated carbonate sediments in the Lower Florida Keys. Surficial values of compressional and shear speed correlate with sediment physical properties and near-surface acoustic reflectivity. Highest speeds (shear 125–150 m s^-1; compressional 1670–1725 m s^-1) are from sandy sediments near Rebecca Shoal and lowest speeds (shear 40–65 m s^-1; compressional 1520–1570 m s^-1) are found in soft, silty sediments which collect in sediment ponds in the Southeast Channel of the Dry Tortugas. High compressional wave attenuation is attributed to scattering of acoustic waves from heterogeneity caused by accumulation of abundant shell material and other impedance discontinuities rather than high intrinsic attenuation. Compared to siliciclastic sediments, carbonate sediment shear wave speed is high for comparable values of sediment physical properties. Sediment fabric, rather than changes due to the effects of biogeochemical processes, is responsible for these differences.