Perspectives of a visible instrument on the VLTI

In this paper we present the most promising science cases for a new generation visible instrument on the VLTI and the conceptual idea for the instrumental configuration. We also present a statistical study of the potential targets that may be accessible for the different classes of objects and for the required spectral resolutions.     

Numerical implementation and sensitivity analysis of a wave energy converter in a time-dependent mild-slope equation model

Several Wave Energy Converters (abbreviated as WECs) have intensively been studied and developed during the last decade and currently small farms of WECs are getting installed. WECs in a farm are partly absorbing, partly redistributing the incident wave power. Consequently, the power absorption of each individual WEC in a farm is affected by its neighbouring WECs. The knowledge of the wave climate around the WEC is needed to predict its performance in the farm. In this paper a technique is developed to implement a single and multiple WECs based on the overtopping principle in a time-dependent mild-slope equation model. So far, the mild-slope equations have been widely used to study wave transformations around coastal and offshore structures, such as breakwaters, piles of windmills and offshore platforms. First the limitations of the WEC implementation are discussed through a sensitivity analysis. Next the developed approach is applied to study the wave height reduction behind a single WEC and a farm. The wake behind an isolated WEC is investigated for uni- and multidirectional waves; it is observed that an increase of the directional spread leads to a faster wave redistribution behind the WEC. Further the wake in the lee of multiple WECs is calculated for two different farm lay-outs, i.e. an aligned grid and a staggered grid, by adapting the performance of each WEC to its incident wave power. The evolved technique is a fast tool to find the optimal lay-out of WECs in a farm and to study the possible influence on surrounding activities in the sea.     

Modelling of drainage dynamics influence on sediment routing system in a fold‐and‐thrust belt

Drainage networks link erosional landscapes and sedimentary basins in a source‐to‐sink system, controlling the spatial and temporal distribution of sediment flux at the outlets. Variations of accumulation rates in a sedimentary basin have been classically interpreted as changes in erosion rates driven by tectonics and/or climate. We studied the interactions between deformation, rainfall rate and the intrinsic dynamics of drainage basins in an experimental fold‐and‐thrust belt subjected to erosion and sedimentation under constant rainfall and shortening rates. The emergence of thrust sheets at the front of a prism may divert antecedent transverse channels (perpendicular to the structural grain) leading to the formation of longitudinal reaches, later uplifted and incorporated in the prism by the ongoing deformation. In the experiments, transverse incisions appear in the external slopes of the emerging thrust sheets. Headward erosion in these transverse channels results in divide migration and capture of the uplifted longitudinal channels located in the inner parts of the prism, leading to drainage network reorganization and modification of the sediment routing system. We show that the rate of drainage reorganization increases with the rainfall rate. It also increases in a nonlinear way with the rate of uplift. We explain this behaviour by an exponent > 1 on the slope variable in the framework of the stream power erosion model. Our results confirm the view that early longitudinal‐dominated networks are progressively replaced by transverse‐dominated rivers during mountain building. We show that drainage network dynamics modulate the distribution of sedimentary fluxes at the outlets of experimental wedges. We propose that under constant shortening and rainfall rates the drainage network reorganization can also modulate the composition and the spatial distribution of clastic fluxes in foreland basins.     

Provenance record of late Maastrichtian–late Palaeocene Andean Mountain building in the Amazonian retroarc foreland basin (Madre de Dios basin,Peru)

Biostratigraphic, sedimentological and provenance analyses suggest that a proto‐Andean Cordillera already existed in southern Peru by late Maastrichtian–late Palaeocene times. A 270‐m‐thick stratigraphic section shows changes in depositional environments from shallow marine (early Maastrichtian) to non‐marine (late Maastrichtian) then back to estuarine (late Palaeocene) conditions. An erosional surface separates lower Maastrichtian from upper Maastrichtian deposits. Above this surface, the late Maastrichtian unit exhibits moderately developed palaeosols and syn‐sedimentary normal faults. The sedimentary evolution is accompanied by a decrease in sedimentation rate and by changes in provenance. Shallow marine lower Maastrichtian deposits have a cratonic provenance as shown by their low εNd(0) values (?15 to ?16) and the presence of Precambrian inherited zircon grains. The upper Maastrichtian deposits have a mixed Andean and cratonic origin with εNd(0) values of ~12.6 and yield the first Cretaceous and Permo‐Triassic zircon grains. Estuarine to shallow marine upper Palaeocene deposits have an Andean dominant source as attested by higher εNd(0) values (?6 to ?10) and by the presence of Palaeozoic and Late Cretaceous zircon grains. The changes in depositional environments and sedimentation rates, as well as the shift in detrital provenance, are consistent with a late Maastrichtian–late Palaeocene period of Andean mountain building. In agreement with recently published studies, our data suggest that an Andean retroarc foreland basin was active by late Maastrichtian–late Palaeocene times.     

Slingram EMI prospection: Are vertical orientated devices a suitable solution in archaeological and pedological prospection?

Electromagnetic induction (EMI) is one of the geophysical techniques widely used in soil studies, the slingram devices being held horizontally over the soil surface, i.e. with the coils located at the same height above the ground surface. Our study aims assessing the abilities of slingram devices when held vertically. 1D and 3D modelling have been achieved in order to compare the theoretical responses of vertical devices to the horizontal ones. Some comparative surveys were also undertaken in archaeological contexts to confirm the reliability of theoretical conclusions. Both approaches show that vertical slingram devices are suitable for survey and can constitute an alternative to the usual horizontal orientation. We give a table in Appendix A which contains the calibration coefficient allowing transforming of the values given by some of commercially available devices which would be advantageous to use in vertical orientation     

The M<Subscript>W</Subscript> 4.5 Vallorcine (French Alps) earthquake of 8 September 2005 and its complex aftershock sequence

On 8 September 2005 a moderate M_W 4.5 earthquake occurred in the north-western Alps midway between Chamonix (France) and Martigny (Switzerland). The focal mechanism corresponds to a right-lateral strike-slip on a N60°E fault plane. The foreshock–mainshock–aftershock sequence is investigated on the basis of data recorded by a temporary network of 28 stations deployed for 1 month just after the mainshock, and data from permanent, regional seismic networks. Absolute and relative locations of more than 400 events are obtained with a mean uncertainty of approximately 0.2 km. Small foreshocks, the mainshock, and early and late aftershocks are located relative to the main aftershock set. The seismic sequence exhibits a surprisingly complex structure, with at least five clusters on distinct fault planes. The main elongated cluster agrees with the location of the mainshock, its hypocenter being 4.3 km below sea level. We discuss the relationship between the right-lateral fault beneath the Loriaz peak (the source of the Vallorcine event), the nearby normal Remuaz fault, and the regional seismotectonic stress field.     

Melting of Fe–Ni–Si and Fe–Ni–S alloys at megabar pressures: implications for the core–mantle boundary temperature

High pressure melting behavior of three Fe-alloys containing 5 wt% Ni and (1) 10 wt% Si, (2) 15 wt% Si or (3) 12 wt% S was investigated up to megabar pressures by in situ X-ray diffraction and laser-heated diamond anvil cell techniques. We observe a decrease in melting temperature with increasing Si content over the entire investigated pressure range. This trend is used to discuss the melting curve of pure Fe. Moreover, our measurements of eutectic melting in the Fe–Fe₃S system show a change in slope around 50 GPa concomitant with the fcc–hcp phase transition in pure solid iron. Extrapolations of our melting curve up to the core–mantle boundary pressure yield values of 3,600–3,750 K for the freezing temperature of plausible outer core compositions.     

Constraints on the formation environment of two chondrule‐like igneous particles from comet 81P/Wild 2

Using chemical and petrologic evidence and modeling, we deduce that two chondrule‐like particles named Iris and Callie, from Stardust cometary track C2052,12,74, formed in an environment very similar to that seen for type II chondrules in meteorites. Iris was heated near liquidus, equilibrated, and cooled at ≤100 °C h^‐1 and within ≈2 log units of the IW buffer with a high partial pressure of Na such as would be present with dust enrichments of ≈10³. There was no detectable metamorphic, nebular, or aqueous alteration. In previous work, Ogliore et al. (2012) reported that Iris formed late, >3 Myr after CAIs, assuming ²⁶Al was homogenously distributed, and was rich in heavy oxygen. Iris may be similar to assemblages found only in interplanetary dust particles and Stardust cometary samples called Kool particles. Callie is chemically and isotopically very similar, but not identical to Iris.     

Parallel Multiple-Point Statistics Algorithm Based on List and Tree Structures

Multiple-point statistics are widely used for the simulation of categorical variables because the method allows for integrating a conceptual model via a training image and then simulating complex heterogeneous fields. The multiple-point statistics inferred from the training image can be stored in several ways. The tree structure used in classical implementations has the advantage of being efficient in terms of CPU time, but is very RAM demanding and then implies limitations on the size of the template, which serves to make a proper reproduction of complex structures difficult. Another technique consists in storing the multiple-point statistics in lists. This alternative requires much less memory and allows for a straightforward parallel algorithm. Nevertheless, the list structure does not benefit from the shortcuts given by the branches of the tree for retrieving the multiple-point statistics. Hence, a serial algorithm based on list structure is generally slower than a tree-based algorithm. In this paper, a new approach using both list and tree structures is proposed. The idea is to index the lists by trees of reduced size: the leaves of the tree correspond to distinct sublists that constitute a partition of the entire list. The size of the indexing tree can be controlled, and then the resulting algorithm keeps memory requirements low while efficiency in terms of CPU time is significantly improved. Moreover, this new method benefits from the parallelization of the list approach.