Dispersion and toxicity to non-target aquatic organisms of pesticides used to treat sea lice on salmon in net pen enclosures

Pesticides are used extensively in the finfish aquaculture industry to control sea lice infestations on farmed salmon. The most prevalent method of use is to enclose a net pen with an impervious tarpaulin and mix a pesticide solution within that enclosure. After treatment for short periods (1 h) the pesticide solution is released to the environment. Concerns have been raised that there is a potential risk to non-target aquatic organisms from those releases. The fate of dispersing pesticide solutions was measured after six simulated treatments in the Lower Bay of Fundy, New Brunswick. Three simulated treatments were done with azamethiphos and three with cypermethrin. Rhodamine dye was added to all pesticide solutions in order to facilitate tracking of the dispersing plume through real-time measurements of dye concentrations by a flow-through fluorometer coupled with a differential global positioning system (DGPS). Water samples were obtained from within the plumes at various times after release and analysed for pesticide content and toxicity to a benthic amphipod Eohaustorius estuaris. Dye concentrations were detectable for time periods after release which varied from 2 to 5.5 h. Distances travelled by the dye patches ranged from 900 to 3000 m and the dye concentrations at the final sampling period were generally 1/200-1/3000 the pre-release concentrations and cypermethrin concentrations were generally 1/1000-1/2000 the pre-release concentrations. Cypermethrin concentrations in water samples were closely correlated with dye concentrations, indicating that dye analyses were an accurate surrogate for cypermethrin concentrations. Most samples taken after the releases of azamethiphos were not toxic to test organisms in 48 h exposures and none were beyond 20 min post-release. By contrast, almost all samples taken after the release of cypermethrin, even up to 5-h post-release, were toxic. Data indicate the potential to cause toxic effects over areas of hectares from a single release of cypermethrin.     

Derivation of design soil coefficients (S) and response spectral shapes for Eurocode 8 using the European Strong-Motion Database

A revision is presently under way to upgrade the status of the `Designrecommendations for earthquake resistance of structures', commonlyreferred to as Eurocode 8 (or EC8). In order to improve the definition ofthe design elastic response spectra (ERS) as defined in the Eurocode 8 –Part 1 (Draft May 2001), the values of the soil amplification factors havebeen calculated for sites on sedimentary soils, both stiff (category B) andsoft (category C), with respect to rock sites (category A), such ascontemplated in EC8. The work was performed by a systematic study ofresponse spectra as a function of magnitude and site conditions, usingrecords from the European Strong-Motion Database.The results confirm the occurrence of systematic spectral amplification onsedimentary soils with respect to reference rock in a large set of Europeanstrong motion data. Such amplification has been quantified through ameasure derived from the Housner Spectrum Intensity definition.The values of the soil coefficients recommended in the current version ofEC 8 are shown to be realistic for category C, in the case of a moderateseismicity context. However the values for subsoil class B need to besignificantly increased both for the moderate and high seismicity context.     

High-resolution imaging of sulfur oxidation states, trace elements, and organic molecules distribution in individual microfossils and contempo rary microbial filaments

Owing to the delicate nature of fossil microorganisms and inherent difficulties for discriminating true fossils from artifacts, an important challenge is to extract unequivocal biogenic information from individual microfossils using high-resolution, nondestructive and sensitive techniques. Here, we use combined synchrotron (X-ray microfluorescence, X-ray absorption near-edge structure and infrared microspectroscopies) and particle-induced X-ray emission analyses to image the spatial distribution at a μm-scale of a variety of potential biogenic markers (major and trace elements, C-H bonds, and sulfur-oxidation states) in individual prokaryotic microfossils. In particular, we analyzed iron-oxide fossil filaments of putative biogenic origin encapsulated with amorphous silica from a fragment of an inactive hydrothermal chimney of the East Pacific Rise. In order to test the biogenic origin of the markers studied, we performed the same analyses on filamentous bacteria corresponding most likely to the ?-Proteobacteria, and collected from substrates exposed to a hydrothermal fluid vent at the Mid-Atlantic Ridge. In both types of fossil and contemporary filaments, the occurrence of CH₂ groups and of three sulfur species (sulfate, sulfite, organic S) showing heterogeneous distribution that underline the cytoplasm of individual cells in the case of the present-day filament, suggests that the original microorganisms were actively metabolizing sulfur. These results show the large potential of combining high-resolution synchrotron techniques to analyze individual microfossils for extracting unequivocal biogenic information. Furthermore, they also suggest that cooccurrence of different sulfur oxidation states within single microfossils could constitute a biogenic metabolic marker indicating S-metabolizing activities.     

Eustatisme, érosion et isostasie flexurale : modélisation numérique appliquée au Rhône messinien

The isostatic response to erosion and Mediterranean Sea unloading of the Messinian Rhone has been quantified. The consequences of the isostatic rebound on fluvial dynamic have been analysed considering the Messinian Rhone profile. To cite this article: J. Gargani, C. R. Geoscience 336 (2004).     

Si in the core? New high-pressure and high-temperature experimental data

High-pressure high-temperature experiments have been carried out up to 25 GPa and 2200°C in a multianvil press on assemblages made of silicates and iron-silicon alloys. At 20 GPa, silicon is extracted from the metal phase, forming stishovite reaction rims around metal grains. The silicon content in metal has been measured by analytical electron microscopy and electron microprobe. In contrast with earlier experiments, the present data were obtained by using silicon-rich metal alloys as starting materials instead of studying incorporation of silicon in initially silicon-free metal. As in most of previous studies carried out below 25 GPa, the silicon content in liquid metal increases with increasing pressure and with decreasing oxygen fugacity. The oxygen fugacity in most experiments was calculated by using two independent buffers: iron/?stite (IW) and SiO₂/Si, allowing to link consistently the Fe contents in silicates, the Si contents in metal and the temperatures of the experiments. At oxygen fugacities 4 log units below IW, silicates are in equilibrium with Si-rich metallic alloys (up to 17 wt% of Si in metal at 20 GPa and 2200°C). Extrapolation to 2 log units below IW leads to less than 0.1 wt% Si in the metal phase. Presence of several wt% of silicon in the Earth’s core thus requires highly reduced initial materials that, if equilibrated at conditions relevant to small planets, should already contain significant amount of silicon dissolved in metal.     

L'érosion des chaînes de montagnes : influence de la sédimentation de piedmont

The applanation of mountain belts that results in peneplain is generally considered to be caused by the long-term activity of erosion. Peneplanation has been previously defined as the lowering of an elevated topography and the concomitant subduing of its relief. We propose a model following which piedmont sedimentation induces the base level rise, allowing applanation to develop at high elevation and resulting in an elevated ‘peneplain’. This model is illustrated by the morphological evolution of the southern flank of the Pyrenees during the Cainozoic. To cite this article: J. Babault, J. Van Den Driessche, C. R. Geoscience 337 (2005).     

Diatom-based inference models and reconstructions revisited: methods and transformations

Different calibration methods and data manipulations are being employed for quantitative paleoenvironmental reconstructions, but are rarely compared using the same data. Here, we compare several diatom-based models [weighted averaging (WA), weighted averaging with tolerance-downweighting (WAT), weighted averaging partial least squares, artificial neural networks (ANN) and Gaussian logit regression (GLR)] in different situations of data manipulation. We tested whether log-transformation of environmental gradients and square-root transformation of species data improved the predictive abilities and the reconstruction capabilities of the different calibration methods and discussed them in regard to species response models along environmental gradients. Using a calibration data set from New England, we showed that all methods adequately modelled the variables pH, alkalinity and total phosphorus (TP), as indicated by similar root mean square errors of prediction. However, WAT had lower performance statistics than simple WA and showed some unusual values in reconstruction, but setting a minimum tolerance for the modern species, such as available in the new computer program C² version 1.4, resolved these problems. Validation with the instrumental record from Walden Pond (Massachusetts, USA) showed that WA and WAT reconstructed most closely pH and that GLR reconstructions showed the best agreement with measured alkalinity, whereas ANN and GLR models were superior in reconstructing the secondary gradient variable TP. Log-transformation of environmental gradients improved model performance for alkalinity, but not much for TP. While square-root transformation of species data improved the performance of the ANN models, they did not affect the WA models. Untransformed species data resulted in better accordance of the TP inferences with the instrumental record using WA, indicating that, in some cases, ecological information encoded in the modern and fossil species data might be lost by square-root transformation. Thus it may be useful to consider different species data transformations for different environmental reconstructions. This study showed that the tested methods are equally suitable for the reconstruction of parameters that mainly control the diatom assemblages, but that ANN and GLR may be superior in modelling a secondary gradient variable. For example, ANN and GLR may be advantageous for modelling lake nutrient levels in North America, where TP gradients are relatively short.     

Astronomy and geophysics in the secondary curriculum

Julien King, Chair of the RAS Education Committee, examines the ways in which astronomy and geophysics figure in secondary-school science.     

A LA-ICP-MS Comparison of Reference Materials Used in Cassiterite U-Pb Geochronology

Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) is used to compare the suitability of four cassiterite (SnO₂) materials (SPG, Yankee, AY-4 and Jian-1), and three matrix-mismatched reference materials (NIST SRM 612, NIST SRM 614 and 91500 zircon) for normalisation of U-Pb and Pb-Pb isotope ratios in cassiterite. The excess variance of ages determined by LA-ICP-MS is estimated to be ±0.33% for ²⁰⁷Pb/²⁰⁶Pb vs. ²⁰⁸Pb/²⁰⁶Pb isochron ages and ± 1.8% and for U-Pb ages. Incorporation of this excess variance in cassiterite ages is necessary for realistic uncertainties. ²⁰⁷Pb-²⁰⁶Pb ages are advantageous for dating Precambrian cassiterite such as SPG compared with U-Pb ages as matrix effect on instrumental mass fractionation of Pb isotopes are generally considered to be minor. We note minor bias in ²⁰⁷Pb/²⁰⁶Pb vs. ²⁰⁸Pb/²⁰⁶Pb isochron ages (~ 0.6%) when using either the NIST SRM 614 or 91500 zircon reference materials and emphasise the requirement for uncertainty propagation of all sources of error and reference materials with comparable U and Pb mass fraction to the cassiterite. The ²³⁸U/²⁰⁶Pb isotopic ratios from normalisation to matrix-mismatched reference materials show varied results, which emphasises the need to use matrix-matched reference materials for calculating U-Pb ages. When cross-calibrated against each other, LA-ICP-MS U-Pb ages of the ca. 1535 Ma SPG, ca. 245 Ma Yankee and ca. 155 Ma Jian-1 cassiterites are all consistent with their ID-TIMS values.