Experimental study of aeolian sand ripples in a wind tunnel

The topographic parameters and propagation velocity of aeolian sand ripples reflect complex erosion, transport, and deposition processes of sand on the land surface. In this study, three Nikon cameras located in the windward (0–1 m), middle (4.5–5.5 m), and downwind (9–10 m) zones of a 10 m long sand bed are used to continuously record changes in sand ripples. Based on the data extracted from these images, this study reaches the following conclusions. (1) The initial formation and full development times of sand ripples over a flatbed decrease with wind velocity. (2) The wavelengths of full development sand ripples are approximately twice the wavelengths of initially formed sand ripples. Both wavelengths increase linearly with friction velocity. During the developing stage of sand ripples, the wavelength increases linearly with time. (3) The propagation velocity of full development sand ripples is approximately 0.6 times that of the initially formed sand ripples. The propagation velocity of both initial and full development of sand ripples increase as power functions with respect to friction velocity. During the developing stage of sand ripples, the propagation velocity decreases with time following a power law. These results provide new information for understanding the formation and evolution of aeolian sand ripples and help improve numerical simulations. Copyright © 2017 John Wiley & Sons, Ltd.     

THE APPLICATION OF MINIATURE UNMANNED AERIAL VEHICLE IN 25 NOVEMBER 2016 ARKETAO MW6.6 EARTHQUAKE

In order to complete the field investigation to the 25 November 2016 Arketao M_W6.6 earthquake, ultra-low altitude remote-sensing data were obtained from miniature unmanned aerial vehicle. The surface rupture surveying has important significance for earthquake research. This paper selects the macro-epicenter of Arketao as the study area. The pictures were obtained with DJI Phantom 3 professional input into the software, the Digital Elevation Model (DEM), Digital Orthophoto Map (DOM) were acquired based on photogrammetry method using the overlapped optical remote-sensing images of UAV. Using these data, we can identify surface ruptures that have vertical dislocation. We selected six feature points and drew the elevation profile. In the elevation profile map, we chose smooth part of the surface rupture sides and obtained the trend line. A stable point in the surface rupture was selected and the abscissa of the point was taken into the equation of two straight lines. Then subtracting the results of the two equations, we can get the vertical dislocation of the surface rupture. On this basis, we chose six feature points and determined their vertical dislocation, which are between 4.4cm and 10.4cm. What's more, taking Bulungkou Xiang in Xinjiang Uygur Autonomous Region for example, we speculated some surface ruptures that have vertical dislocation. It can provide a new method for identifying surface rupture in the field. In addition, we get DEM data of the Bulunkou area where ambient conditions are very poor, by using miniature unmanned aerial vehicle and taking 255 photos. Putting those photos into the EasyUAV software, we got the area digital elevation of 2cm resolution. Comparing these data with RTK data, we summarized some practical problems and solutions in the practical operation and evaluated the accuracy of miniature unmanned aerial vehicle data. The Pearson Correlation Coefficient is 0.996 6. In terms of absolute elevation, the average result of UAV and RTK differs by 156.96m. In terms of relative elevation, the average result of UAV and RTK differs by 9.74m. Compared with the previous test of Pishan County, there is a notable divergence in the results. It shows that the data accuracy will be affected to some extent in the cold weather in high elevations. The specific impact needs further exploration.     

PRELIMINARY STUDY OF PALEOEARTHQUAKES ON THE MIDDLE-EASTERN SEGMENT OF JINTA NANSHAN FAULT

Hexi Corridor is located at the northeastern margin of the Tibetan plateau. Series of late Quaternary active faults are developed in this area. Numerous strong earthquakes occurred in history and nowadays. Jinta Nanshan fault is one of the boundary faults between the Qinghai-Tibet block and the Alxa block. The fault starts from the northwest of Wutongdun in the west, passes through Changshan, Yuanyangchi reservoir, Dakouzi, and ends in the east of Hongdun. Because the Jinta Nanshan fault is a new active fault in this region, it is important to ascertain its paleoearthquakes since late Pleistocene for the earthquake risk study. Previous studies were carried out on the western part, such as field geomorphic investigation and trench excavation, which shows strong activity in Holocene on the western segment of Jinta Nanshan fault. On the basis of the above research, in this paper, we carried out satellite image interpretation, detailed investigation of faulted landforms and differential GPS survey for the whole fault. Focusing on the middle-eastern part, we studied paleoearthquakes through trench exploration on the Holocene alluvial fan and optical luminescence dating. The main results are as follows:Early Pleistocene to late Pleistocene alluvial strata are widely developed along the fault and Holocene sediment is only about tens of centimeters thick. The Jinta Nanshan fault shows long-lasting activity since late Quaternary and reveals tens of centimeters of the lowest scarp which illustrates new strong activity on the middle-east segment of this fault. Since late Pleistocene, 4 paleoearthquakes happened respectively before(15.16±1.29) ka, before(9.9±0.5) ka, about 6ka and after(3.5±0.4) ka, revealed by 4 trenches, of which 2 are laid on relatively thicker Holocene alluvial fan. Two events occurred since middle Holocene, and both ruptured the whole fault.     

基于一致可靠度的地震动记录样本容量确定方法研究

确定地震动输入样本容量是开展结构动力地震反应分析的重要环节,目前国内外关于地震动输入样本容量的讨论往往忽略或尚难以定量考虑结构地震反应估计的可靠度水平。以一实际钢筋混凝土框架结构为例,首先分析在大样本地震动作用下结构非线性地震反应的统计特征,研究估计结构地震反应时取样本最大值和平均值的差异,然后借助于假设检验分析结构地震反应的概率分布模型,给出基于一致可靠度的地震动样本容量确定方法,并对比分析单周期点、多周期点、谱值匹配调整地震动及人工合成地震动对样本容量需求的影响,为保证在小样本地震动输入下结构地震反应估计值满足给定可靠度和容许误差提供分析方法和判断依据。本文方法适应于定量确定不同结构类型和不同地震强度水平下的地震动样本容量需求,对建筑结构抗震性能评估及设计规范研究有一定意义。     

南北地震带北段流体资料地震预测效能检验

以南北地震带北段长时间、 连续并有多次震例记录的流体观测资料为研究对象, 使用Molchan图表法对其与周边地震的关系进行了检验和分析, 计算了时间占有率、 预测效能和概率增益等参数。 结果表明, 南北地震带北段各台项的预测效能差别较大。 整体看来, 甘东南地区的观测资料检验效果较好, 表现为概率增益较大; 青海东部地区的多个测项预测效能检验结果较好, 但概率增益较小; 宁夏北部贺兰山东麓断裂附近两台项的报准率差别不大, 但概率增益、 时间占有率等却都不同。 此外, 从前兆资料变化时间上看, 短期异常和长期异常都较多, 中期异常较少。     

2013年岷县—漳县MS6.6地震前水氡浓度的临界慢化现象研究

基于临界慢化理论, 以2013年7月22日甘肃岷县—漳县M_S6.6地震前南北构造带及邻区水氡浓度观测资料为例, 逐一计算了表征临界慢化现象的自相关系数和方差。 研究结果表明, 2013年岷县—漳县M_S6.6地震前, 10个台点水氡浓度资料表现出较明显的临界慢化现象, 且出现慢化现象的观测点空间分布具有一定丛集性, 慢化持续时间呈现出由南向北迁移的特征。 综合分析认为, 临界慢化方法可以有效识别水氡资料蕴含的慢化信息, 这些早期异常信号对判定前兆异常所处阶段以及深入理解前兆资料变化的物理内涵具有重要的科学意义。     

2017年九寨沟7.0级地震前不同级别地震空区的演化过程分析

结合传统地震学方法与数字地震学方法,回顾总结了日常分析预报中针对九寨沟7.0级地震开展的相关工作,梳理总结了地震前提出的甘东南地震异常信息,进一步讨论了九寨沟地震前中期、短期及临震异常特征。通过分析九寨沟7.0级地震之前区域范围内不同震级活动图像,发现甘青川交界地区5级空区在震前向震中一侧收缩、4级地震超长平静458天、3级空区在震前4天被打破的现象,同时发现,震中附近区域震源机制一致性较高,反映了震源区的高应力水平。     

2013-2016年乳山震群b值深度变化特征及意义

利用双差定位方法,对2013年10月—2016年12月乳山震群进行重定位,并计算乳山震群中地震集中活动区域b值,分析其深度分布变化。结果显示：地震重定位后表现为近NW向集中分布;b值在震源深度7.4 km上下最小,反映该深度处应力最强;乳山震群b值并不随震源深度增大而呈系统性减小变化,且深度10.2 km以下无有效b值,进一步证实该震群近NW向发震断裂的存在。根据b值随深度的变化特征,推测断裂活动的高应力区域集中在6.5—10.2 km深度范围内,断裂活动在深度7.4 km处应力最强,且水平分布最广;相比上下两侧地壳介质b值在5.5—6.2 km深度层位明显增大,反映该深度层位介质性质存在明显差异。     

地闪对崇明地震台地球物理观测的干扰

通过对比崇明地区地闪及崇明地震台地球物理观测资料,发现受地闪引起的电磁场变化的直接作用或对仪器元件的间接作用,地磁、地电、电磁扰动和水位观测干扰比例较高,干扰幅度与地闪距离及形成的电流强度有关。具体干扰形态如下：①对电磁扰动干扰表现为单向突跳和测值的整体抬升;②对地磁测项干扰表现为正负方向的单点突跳;③对大地电场干扰表现为大幅震荡;④对水位观测干扰表现为大幅突跳。     

大尺度雁列断层粘滑运动数值模拟

通过ANSYS软件建立二维雁列断层模型,采用粘弹性力学参数,建立摩擦系数接触单元,模拟10万年时间大尺度雁列走滑断层活动（地震相关活动）,分析挤压条件下的断层活动特征,研究结果表明：①断层时空区域不同,所受应力也不同,接近贯通区域重合地区所受应力较大,粘滑运动剧烈,由贯通区域向断层两侧逐渐延伸,所受应力依次减小;②摩擦系数越小,地震发生频率越高,地震运动周期越短,则位错量相对较小,易发生震级较小地震;摩擦系数越大,地震发生频率越低,地震运动周期越长,则位错量相对较大,易发生震级较大地震;③给定的边界挤压速率越大,地震发生频率越高,地震运动周期越短,则位错量增大,易发生震级较大地震。