The Upper Adriatic borderland: From conflict to harmony

The paper presents an overview of the Upper Adriatic as a contact area between different cultural, social, economic and political entities, producing potential conflicts in the last century. The first part of the 20th century represented a classic example of geopolitical conflict through two World Wars and their related Peace Conferences that deeply impacted the region. Conflicts arising from the mid-century solution of the Trieste question transformed the Upper Adriatic into a laboratory of contemporary political geographic transformation. Changing geopolitical patterns have also modified the political, social and ethnic construction of the Upper Adriatic. The process of creating new international boundaries in the region ended in 1991 with the independence of Slovenia and Croatia. Through these geopolitical transformations in the Upper Adriatic, new political geographic attitudes evolved. Early on, Ratzel's geopolitical principles of defining borders as power barometers between neighbors dominated. More recently, attitudes have reflected modern integrative ideas with a focus on looking for harmony and the elimination of international conflicts. Greater attention has thus been given to the political geography of `everyday life', inter-ethnic relations, and cross-border contacts. Hence, `new' borderlands of the Upper Adriatic are more receptive to integration because they seek to overcome conflicts caused by the division of traditionally homogeneous spaces as local level political and ideological hindrances disappear. The region divided among Italy, Slovenia, and Croatia is becoming a new and special type of European borderland in the new century.     

Aftershock sequence simulations using synthetic earthquakes and rate-state seismicity formulation

We use an efficient earthquake simulator that incorporates rate-state constitutive properties and uses boundary element method to discretize the fault surfaces, to generate the synthetic earthquakes in the fault system. Rate-and-state seismicity equation is subsequently employed to calculate the seismicity rate in a region of interest using the Coulomb stress transfer from the main shocks in the fault system. The Coulomb stress transfer is obtained by resolving the induced stresses due to the fault patch slips onto the optimal-oriented fault planes. The example results show that immediately after a main shock the aftershocks are concentrated in the vicinity of the rupture area due to positive stress transfers and then disperse away into the surrounding region toward the background rate distribution. The number of aftershocks near the rupture region is found to decay with time as Omori aftershock decay law predicts. The example results demonstrate that the rate-and-state fault system earthquake simulator and the seismicity equations based on the rate-state friction nucleation of earthquake are well posited to characterize the aftershock distribution in regional assessments of earthquake probabilities.     

新疆西天山金属矿床,成矿系列及形成演化规律

笔者根据对西天山北部大量矿床和矿点研究,在对西天山成矿类型及成矿控制因素分析的基础上,将该区金属矿床主要划分为３个成矿系列类型,即：①与中酸性、酸性花岗岩类有关的Ｃｕ－Ｆｅ－Ａｕ－ＭｏＯ－Ｗ－Ｓｎ－Ｐｂ－Ｚｎ成矿系列类型;②与基性－中性－酸性火山岩建造有关的Ｃｕ－Ｆｅ－Ａｕ成矿系列类型;③与沉积岩、热水沉积岩有关的层控Ｃｕ－Ｐｂ－Ｚｎ成矿系列类型。每个成矿系列类型具有不同的成矿特征和成矿背景。成矿     

Modelling flow resistance in vegetated streams: review and development of new theory

Aquatic macrophytes are often the dominant factor influencing flow conditions within the channels they occupy. Existing knowledge of how stream plants affect the flow is outlined, and the different scales at which vegetation resistance operates are proposed. Resistance is shown to be a function of the size of the plants, their structural properties, location in the channel, and the local flow conditions. Current models to calculate this composite resistance effect are assessed in the light of theoretical considerations of the nature of vegetation resistance. New theory is also presented, which demonstrates the non‐linear relationship between channel resistance and the proportion of the channel occupied by vegetation. Copyright © 2004 John Wiley & Sons, Ltd.     

Sedimentology and luminescence ages of Glacial Lake Humber deposits in the central Vale of York

The sedimentary sequence through the Hemingbrough Formation exposed at two sites in the central part of the Vale of York, south of the Escrick moraine ridge, is described and used to reconstruct the palaeoenvironmental history of Glacial Lake Humber. Interbedded wave ripples and laminated silts and clays at both sites indicate that Lake Humber was characterised by fluctuating water levels, often no deeper than wave base. Optically stimulated luminescence ages of 21.0 ± 1.9, 21.9 ± 2.0, and 24.1 ± 2.2 kyr returned from two wave-rippled sandy beds within the glaciolacustrine sequence at Hemingbrough, c. 10 km south of the Escrick moraine ridge, provide the first direct chronological determination for the low-level phase of Lake Humber. As these beds are principally attributed to glacial meltwater emanating from the Vale of York ice lobe of the British Ice Sheet, when its margin was at or near the Escrick moraine ridge, this corroborates the interpretation that this ridge marks the LGM ice limit.     

Monte Carlo simulation of mixing in Ca3Fe2Ge3O12–Ca4Ge4O12 garnets and implications for the thermodynamic stability of pyrope–majorite solid solution

Static lattice energy calculations, based on empirical pair potentials, were performed for a large set of structures differing in the arrangement of octahedral cations within the garnet 2 × 2 × 2 supercell. The compositions of these structures varied between Ca₃Fe₂Ge₃O₁₂ and Ca₄Ge₄O₁₂. The energies were cluster expanded using pair and quaternary terms. The derived ordering constants were used to constrain Monte Carlo simulations of temperature-dependent mixing properties in the ranges of 1,073–3,673 K and 0–10 GPa. The free energies of mixing were calculated using the method of thermodynamic integration. The calculations predict a wide miscibility gap between Fe-rich (cubic) and Fe-pure (tetragonal) garnets consistent with recent experimental observations of Iezzi et al. (Phys Chem Miner 32:197–207, 2005). It is shown that the miscibility gap arises due to a very strong cation ordering at the Fe-pure composition, driven by the charge difference between Ca²⁺ and Ge⁴⁺ cations. The structural and thermodynamic analogies between Ca–Ge and Mg–Si systems suggest that a similar miscibility gap should exist between pyrope and Mg–Si-majorite.     

Environmental controls on clay mineralogy of an Early Jurassic mudrock (Blue Lias Formation,southern England)

We present a dataset including clay mineralogy, gamma-ray spectrometry, organic matter content and magnetic susceptibility of the Hettangian to lowest Sinemurian successions of Dorset and Somerset, southern UK (Blue Lias Formation, Bristol Channel and Wessex basins). In both areas, the clay assemblages comprise predominantly detrital illite, kaolinite and illite/smectite mixed layers. Clays probably originated from the erosion of the Hercynian massifs, the relative proportions of kaolinite and illite being modulated by arid-humid climatic fluctuations. The organic matter (OM) content (types II to IV) ranges up to 12% in both areas. A clear stratigraphical trend in clay mineral assemblages is apparent in Somerset, whereas in Dorset sharp contrasts between adjacent horizons and a greater dilution by carbonate mask the long-term evolution. Correlations between both areas based on similar vertical trends in clay mineral abundance support the suggestion of a hiatus within the angulata Zone of the Dorset succession. As expected, the kaolinite/illite ratio correlates with the Th/K ratio deduced from gamma-ray spectrometry. However, significant departures from the correlation occur in OM-rich intervals, suggesting that Th may be partly adsorbed on to OM particles. Surprisingly, high magnetic susceptibility correlates with abundant kaolinite, not with Fe-rich clays, indicating either that kaolinite is accompanied by a soil-inherited magnetisable phase (possibly iron oxide) or that illite-rich rocks are more strongly diluted by carbonate than are kaolinite-rich strata.     

Truncation of the distribution of ground-motion residuals

Recent studies to assess very long-term seismic hazard in the USA and in Europe have highlighted the importance of the upper tail of the ground-motion distribution at the very low annual frequencies of exceedance required by these projects. In particular, the use of an unbounded lognormal distribution to represent the aleatory variability of ground motions leads to very high and potentially unphysical estimates of the expected level of shaking. Current practice in seismic hazard analysis consists of truncating the ground-motion distribution at a fixed number (ε _max) of standard deviations (σ). However, there is a general lack of consensus regarding the truncation level to adopt. This paper investigates whether a physical basis for choosing ε _max can be found, by examining records with large positive residuals from the dataset used to derive one of the ground-motion models of the Next Generation Attenuation (NGA) project. In particular, interpretations of the selected records in terms of causative physical mechanisms are reviewed. This leads to the conclusion that even in well-documented cases, it is not possible to establish a robust correlation between specific physical mechanisms and large values of the residuals, and thus obtain direct physical constraints on ε _max. Alternative approaches based on absolute levels of ground motion and numerical simulations are discussed. However, the choice of ε _max is likely to remain a matter of judgment for the foreseeable future, in view of the large epistemic uncertainties associated with these alternatives. Additional issues arise from the coupling between ε _max and σ, which causes the truncation level in terms of absolute ground motion to be dependent on the predictive equation used. Furthermore, the absolute truncation level implied by ε _max will also be affected if σ is reduced significantly. These factors contribute to rendering a truncation scheme based on a single ε _max value impractical.     

Deep-water sediment transport patterns and basin floor topography in early rift basins: Plio-Pleistocene syn-rift of the Corinth Rift,Greece

Our current understanding on sedimentary deep-water environments is mainly built of information obtained from tectonic settings such as passive margins and foreland basins. More observations from extensional settings are particularly needed in order to better constrain the role of active tectonics in controlling sediment pathways, depositional style and stratigraphic stacking patterns. This study focuses on the evolution of a Plio-Pleistocene deep-water sedimentary system (Rethi-Dendro Formation) and its relation to structural activity in the Amphithea fault block in the Corinth Rift, Greece. The Corinth Rift is an active extensional basin in the early stages of rift evolution, providing perfect opportunities for the study of early deep-water syn-rift deposits that are usually eroded from the rift shoulders due to erosion in mature basins like the Red Sea, North Sea and the Atlantic rifted margin. The depocentre is located at the exit of a structurally controlled sediment fairway, approximately 15 km from its main sediment source and 12 km basinwards from the basin margin coastline. Fieldwork, augmented by digital outcrop techniques (LiDAR and photogrammetry) and clast-count compositional analysis allowed identification of 16 stratigraphic units that are grouped into six types of depositional elements: A—mudstone-dominated sheets, B—conglomerate-dominated lobes, C—conglomerate channel belts and sandstone sheets, D—sandstone channel belts, E—sandstone-dominated broad shallow lobes, F—sandstone-dominated sheets with broad shallow channels. The formation represents an axial system sourced by a hinterland-fed Mavro delta, with minor contributions from a transverse system of conglomerate-dominated lobes sourced from intrabasinal highs. The results of clast compositional analysis enable precise attribution for the different sediment sources to the deep-water system and their link to other stratigraphic units in the area. Structures in the Amphithea fault block played a major role in controlling the location and orientation of sedimentary systems by modifying basin-floor gradients due to a combination of hangingwall tilt, displacement of faults internal to the depocentre and folding on top of blind growing faults. Fault activity also promoted large-scale subaqueous landslides and eventual uplift of the whole fault block.