江西武宁县石门寺钨铜矿区风化作用过程中W、Cu等元素的表生地球化学行为(之一)

以江西省武宁县石门寺钨铜矿区燕山期和晋宁期岩体风化作用过程中W、Cu等元素的表生地球化学行为为研究对象,通过反映风化程度的化学风化指数CIA、风化作用过程中组分得失的估算、不同介质中W、Cu等成矿元素的含量变化及大离子亲石元素表生地球化学行为等方法的研究表明,石门寺钨铜矿区2个时期岩体元素淋失与风化强度有关,土壤剖面中碱金属、碱土金属元素大量淋失,而W、Cu等成矿元素在土壤B层中显著富集;从岩石到土壤、再到水系沉积物风化过程中,W、Cu等成矿元素含量逐渐升高,为此,一级水系沉积物和B层土壤是赣北九岭W、Sn、Cu、Mo多金属矿集区地球化学找矿的绝佳采样介质,是矿集区内找矿新突破的有效手段。     

黔西地区构造变形特征及其煤层气地质意义

黔西地区处于特提斯与滨太平洋两个构造域的交接地带,多期性质不同的构造作用形成了现今错综复杂的构造变形特征。根据构造变形的差异,可划分为织金-纳雍NE向构造变形区、水城-紫云NW向构造变形区和黔西南复杂构造变形区。在野外地质的基础上,结合微观变形特征和矿物流体包裹体测试分析,认为黔西地区构造变形属于上地壳低温-中低温环境下的脆性-脆韧性变形;由于黔西地区基底构造相对稳定,成煤期后断块内部变形较弱,煤储层形成了一定程度的构造裂隙,有助于渗透率的提高,煤层气勘探开发前景良好。     

Estimates of potential nitrate reductase activity in sediments: comparisons of two incubation methods and four inhibitors

Sediment samples, collected from a large shallow lake, Taihu, China, were incubated in two conditions (with and without air extraction) with regard to four soil enzyme’s inhibitors (dry and moist heat sterilizations, chloramphenicol and toluene) to estimate the potential nitrate reductase (Nar) activities. The objectives of paper were to define (1) whether to exclude air from the mixture of sediment and substrate solution prior to incubation was necessary, and (2) the efficacy of four inhibitors when assaying the enzyme. No significant difference between two incubation methods was found (P < 0.05), indicating that it is not necessary for estimating the potential Nar activity in the sediment to construct an initial anaerobic condition by air extractions prior to incubation. Toluene (1.0 mL/g sediment) and dry heat sterilization effectively and persistently inhibit the reduction of nitrate to nitrite during the incubation of 42 h. The authors concluded that both should be used as preferred inhibitors. In contrast, chloramphenicol (30 μg/g sediment) and moist heat sterilization inhibitors restrained nitrate reduction for <24 h only. In addition, it was found that no nitrite produced was substantially reduced in 24 h. Therefore, it should be needless for potential Nar activity estimation in the sediment to add 2,4-dinitrophenol to inhibit nitrite reductase.     

Quick sulfide buffering in inner shelf sediments of the East China Sea impacted by eutrophication

In the eutrophic coastal ocean, quick formation of iron (Fe) sulfide is environmentally important to effectively prevent accumulation of dissolved sulfide and its detrimental effects on the benthic ecosystem. In this study, 0.5 N HCl-extractable labile Fe (LFe), acid volatile sulfide, and pyrite in the East China Sea inner shelf sediments were examined to investigate the mechanisms of quick sequestration of dissolved sulfide and potential impacts of frequent algal blooms on the capacity of quick sulfide-buffering in eutrophic coastal areas of the large-sized continental shelf subject to massive terrestrial input. The results indicate that sulfate reduction has been competitively suppressed by dissimilatory Fe reduction due to limited availability of labile organic matter. Dissolved sulfide can be quickly buffered by reaction with LFe and, therefore, is difficult to accumulate to a high level. The quick sulfide-buffering capacity has not become exhausted partly because of the formation of un-sulfidized LFe(II) via dissimilatory reduction of less reactive Fe oxides. It is expected that dissolved sulfide will not pose detrimental effects on the benthic ecosystem in the near future if the current biogeochemical/ecological state remains.     

Spatial evaluation of phosphorus retention in riparian zones using remote sensing data

Riparian zones act as important buffer zones for non-point source pollution, thus improving the health of aquatic ecosystems. Previous research has shown that riparian zones play an important role, and that land use has an important effect, on phosphorus (P) retention. A spatial basin-scale approach for analyzing P retention and land use effects could be important in preventing pollution in riparian zones. In this study, a riparian phosphorus cycle model based on EcoHAT was generated with algorithms from soil moisture and heat models, simplified soil and plant phosphorus models, plant growth models, and universal soil loss equations. Based on remote sensing data, model performance was enhanced for spatial and temporal prediction of P retention in the riparian zone. A modified soil and plant P model was used to simulate the soil P cycle of a riparian zone in a temperate continental monsoon climate in northern China. A laboratory experiment and a field experiment were conducted to validate the P cycle model. High coefficients of determination (R ²) between simulated and observed values indicate that the model provides reliable results. P uptake variations were the same as the net primary productivity (NPP) trends, which were affected by soil temperature and moisture in the temperate continental monsoon climate. Beginning in June, the monthly content increased, with the maximum appearing in August, when the most precipitation and the highest temperatures occur. The spatial distribution of P uptake rates from March to September showed that areas near water frequently had relatively high values from May to August, which is contrary to results obtained in March, April, and September. The P uptake amounts for different land uses changed according to expectation. The average monthly P uptake rates for farmlands and grasslands were more than those for orchards and lowlands, which had moderate P uptake rates, followed by shrubs and forests. The spatial distribution of soil erosion demonstrated that the soil erosion came primarily from high-intensity agricultural land in the western and central areas, while the northern and eastern study regions, which were less affected by human activity, experienced relatively slight soil erosion. From the point of view of P pollution prevention, the spatial structure of riparian zones and the spatial distribution of land use around the Guanting reservoir are thus not favorable.     

3D alluvial aquifer reconstruction in polluted areas by means of GPR (Sabiñánigo,N Spain)

Assumptions of simple geometries for alluvial deposits (related to main rivers) can preclude determination of complexities that are revealed as fundamental controls in underground flow. Although subhorizontal contacts between alluvial and substratum materials are expected, previous sedimentary or erosional processes can result in irregular geometries, only accessible through detailed analysis. The studied case presents the 3D reconstruction of a Quaternary terrace in the proximities of Sabiñánigo (Southern Pyrenees, Northeastern Spain), lying on homogeneous Eocene marls. The studied area is located in an industrialized area supporting strongly pollutant chemical industry (chlorinated pesticides) for the past 50 years. The objective of the study was to constrain the groundwater pathway along the area to subsequently analyze leakage of chemicals to the water table. In order to reveal preferred flow paths, a detailed characterization of the internal structure of the alluvial deposits (0.5–13 m thick) and their relations with the Tertiary substratum was carried out by means of ground penetrating radar (GPR, 50 and 100 MHz antennas). The obtained models permit identifying several topographic highs in the alluvial/substratum contact, determining preferred pathways in water flow, favoring particular conditions associated with low levels of the water table. The presented results support the interest of application of GPR surveys in order to characterize the groundwater pathways in expected homogeneous areas and their importance in order to establish the contaminant surveillance network.     

Archean to Recent aeolian sand systems and their sedimentary record: Current understanding and future prospects

The sedimentary record of aeolian sand systems extends from the Archean to the Quaternary, yet current understanding of aeolian sedimentary processes and product remains limited. Most preserved aeolian successions represent inland sand‐sea or dunefield (erg) deposits, whereas coastal systems are primarily known from the Cenozoic. The complexity of aeolian sedimentary processes and facies variability are under‐represented and excessively simplified in current facies models, which are not sufficiently refined to reliably account for the complexity inherent in bedform morphology and migratory behaviour, and therefore cannot be used to consistently account for and predict the nature of the preserved sedimentary record in terms of formative processes. Archean and Neoproterozoic aeolian successions remain poorly constrained. Palaeozoic ergs developed and accumulated in relation to the palaeogeographical location of land masses and desert belts. During the Triassic, widespread desert conditions prevailed across much of Europe. During the Jurassic, extensive ergs developed in North America and gave rise to anomalously thick aeolian successions. Cretaceous aeolian successions are widespread in South America, Africa, Asia, and locally in Europe (Spain) and the USA. Several Eocene to Pliocene successions represent the direct precursors to the present‐day systems. Quaternary systems include major sand seas (ergs) in low‐lattitude and mid‐latitude arid regions, Pleistocene carbonate and Holocene–Modern siliciclastic coastal systems. The sedimentary record of most modern aeolian systems remains largely unknown. The majority of palaeoenvironmental reconstructions of aeolian systems envisage transverse dunes, whereas successions representing linear and star dunes remain under‐recognized. Research questions that remain to be answered include: (i) what factors control the preservation potential of different types of aeolian bedforms and what are the characteristics of the deposits of different bedform types that can be used for effective reconstruction of original bedform morphology; (ii) what specific set of controlling conditions allow for sustained bedform climb versus episodic sequence accumulation and preservation; (iii) can sophisticated four‐dimensional models be developed for complex patterns of spatial and temporal transition between different mechanisms of accumulation and preservation; and (iv) is it reasonable to assume that the deposits of preserved aeolian successions necessarily represent an unbiased record of the conditions that prevailed during episodes of Earth history when large‐scale aeolian systems were active, or has the evidence to support the existence of other major desert basins been lost for many periods throughout Earth history?     

Geochemistry,and zircon U–Pb and molybdenite Re–Os geochronology of Jilongshan Cu–Au deposit,southeastern Hubei Province,China

The Jilongshan skarn Cu–Au deposit is located at the Jiurui ore cluster region in the southwestern part of the Middle–Lower Yangtze River valley metallogenic belt. The region is characterized by NW‐, NNW‐ and EW‐trending faults and the mineralization occurs at the contact of lower Triassic carbonate rocks and Jurassic granodiorite porphyry intrusions. The intrusives are characterized by SiO₂, K₂O, and Na₂O concentrations ranging from 61.66 to 67.8 wt.%, 3.29 to 5.65 wt.%, and 2.83 to 3.9 wt.%, respectively. Their A/CNK (A/CNK = n(Al₂O₃)/[n(CaO) + n(Na₂O) + n(K₂O)]) ratio, δEu, and δCe vary from 0.77 to 1.17, 0.86 to 1, and 0.88 to 0.96, respectively. The rocks show enrichment in light rare earth elements ((La/Yb)_N = 7.61–12.94) and large ion lithophile elements (LILE), and depletion in high field strength elements (HFSE), such as Zr, Ti. They also display a peraluminous, high‐K calc‐alkaline signature typical of intrusives associated with skarn and porphyry Cu–Au–Mo polymetallic deposits. Laser ablation inductively coupled plasma spectrometry (LA‐ICP‐MS) zircon U–Pb age indicates that the granodiorite porphyry formed at 151.75 ± 0.70 Ma. A few inherited zircons with older ages (677 ± 10 Ma, 848 ± 11 Ma, 2645 ± 38 Ma, and 3411 ± 36 Ma) suggest the existence of an Archaean basement beneath the Middle–Lower Yangtze River region. The temperature of crystallization of the porphyry estimated from zircon thermometer ranges from 744.3 °C to 751.5 °C, and 634.04 °C to 823.8 °C. Molybdenite Re–Os dating shows that the Jilongshan deposit formed at 150.79 ± 0.82 Ma. The metallogeny and magmatism are correlated to mantle–crust interaction, associated with the subduction of the Pacific Plate from the east. Copyright © 2013 John Wiley & Sons, Ltd.     

五河杂岩的变质岩石学及P-T条件分析钻孔的研究

五河杂岩是华北克拉通东部陆块东南缘最重要的岩石单元。然而,直至今日,人们对于该组杂岩一直缺乏足够的研究,特别是对于其形成的变质条件分歧较大。本文通过对蒙城南ZK02钻孔中五河杂岩的构成和地质特征详细研究表明五河杂岩分为上、下两段。上段主要为一套由云母片岩、大理岩和花岗片麻岩组成的变质表壳岩系,下段为一套基性变质岩,主要岩性为斜长角闪岩、角闪岩、石榴斜长角闪岩和少量的混合岩。同时,针对下段特征岩石（石榴斜长角闪岩）,进行了较为详细的岩相学和矿物化学分析,并应用不同的温压计进行P-T条件评价和比较,结合岩相学限定和前人的研究成果,认为五河杂岩的主体普遍经历了高压角闪岩相变质作用,其温压范围为：T=671 ℃～700 ℃和P=0.82～0.95 GPa,地温梯度约为25～28 ℃/km,与典型陆壳地温梯度类似。与同邻区主要岩石单元的变质级别相比,五河杂岩应当形成于板内变质环境,并不具备造山带变质特征。     

郯庐断裂带(安徽段)内磁铁石榴角闪岩的形成条件、年代学及构造归属的探究

通过对肥东群南缘特征性岩石——磁铁石榴角闪岩的构造地质学和岩相学研究表明,磁铁石榴角闪岩及其围岩以构造透镜体形式产出,该变质岩具有两个阶段变质矿物组合,热力学评价显示①阶段的温压范围为：T=616~700℃和P=0.66~0.85GPa,平均温压为T=653±35℃和P=0.75±0.09GPa。②阶段的温压范围为：T=597~643℃和P=0.51~0.94GPa,平均温压为T=620±15℃和P=0.73±0.15GPa,并表现出一个快速等压降温P-T演化特征。锆石U-Pb定年和拉曼光谱分析表明,该磁铁石榴角闪岩的变质年龄为2469±49Ma。结合地质背景和前人的研究,可以判定该类岩石可能源于华北板块。由于郯庐断裂的左旋走滑作用被构造并置与扬子板块中。从而进一步推测,郯庐断裂（安徽段）横向宽度可达到10~15km。