Fracture and stress orientation from borehole image logs: A case study from Cambay basin,India

The Deccan trap basalt, laid down by multiple lava flows during upper Cretaceous to Paleocene times forms the basement of current study in Cambay basin. As such, there is great interest and value in fracture detection and evaluation of fractured basement reservoirs in the Cambay basin. The procedure for identification and evaluation of natural as well as induced fractures in basaltic basement of the Cambay basin is presented in this work. In this study formation micro-imager (FMI) and extended range micro-imager (XRMI) log data for fracture identification is used. The Deccan trap basaltic basement of the study area, comprising five wells in the Tarapur-Cambay block, has potential for holding commercial hydrocarbon due to the presence of fractures and weathered basement. Both image logs (FMI, XRMI) identify three types of fracture including open (conductive), partially open and closed (resistive) fractures, of which open and partially open fractures are important for hydrocarbon accumulation. Fracture dip ranges from 10° to 80°. Image logs have also identified washout, breakout and drilling-induced fracture zones. The strike direction of the open natural fractures for four wells varies from N60°E to N30°E whereas the strike direction of most natural fracture in the fifth well is oriented towards N20°W. The orientations of drilling-induced fractures and breakouts may be interpreted for the in-situ stress direction over the logged interval. Drilling-induced tensile fractures, identified over the depth interval of 1969–1972 m, and borehole breakouts over the interval of 1953–1955 m in one well, suggest an orientation of maximum in-situ horizontal compressive stress (S_H) lies in the north-south direction. The azimuths of open natural fractures in the same well vary from north-south to N30°E. It is expected that the direction of fluid flow will be controlled by open natural fractures and therefore would be in a direction parallel to the S_H direction, which is orthogonal to the minimum horizontal stress (S_h) direction. The orientations observed are consistent with the present day S_H direction in the study area of Cambay basin.     

Web GIS and its architecture: a review

Phenomenal progress has been witnessed in the field of Geographic Information System (GIS) in recent times. The development of webGIS is the result of the growth of the Internet and consequently World Wide Web. The webGIS architecture is continuously changing according to contemporary technologies and requirements. In this paper, webGIS and its architectures are reviewed. Firstly, GIS and invention of the Internet are discussed. Evolution of webGIS is then covered along with major milestones of its development and open source initiatives. It is followed by discussion on client server architecture and its types. Thick and thin client architectures are then described and compared. As the paradigm in the computing world shifted towards web services, service-oriented architecture (SOA) is also discussed in context of webGIS. Spatial cloud computing and cloud-based architecture for webGIS are then described. The paper also provides a comparison of different webGIS architectures so that suitable architecture can be selected by the user based upon the requirements.     

Characteristics of ambient ammonia over Delhi,India

In the present paper, we have characterized the ambient ammonia over Delhi along with other trace gases (NH₃, NO, NO₂, SO₂ and CO) and particulates (PM_2.5 and PM₁₀) measured during December 2011 to June 2012. The average mixing ratios of ambient NH₃, NO, NO₂, SO₂ and CO were recorded as 21.2 ± 5.4, 19.5 ± 4.9, 17.4 ± 1.4, 1.7 ± 0.5 ppb and 1.6 ± 0.7 ppm, respectively, during winter, whereas the average mixing ratios of ambient NH₃, NO, NO₂, SO₂ and CO were recorded as 20.8 ± 4.7, 21.7 ± 6.3, 16.8 ± 3.1, 2.2 ± 0.8 ppb and 1.8 ± 0.9 ppm, respectively, during summer. In the present case, non-significant seasonal and diurnal variations of NH₃, NO, NO₂, SO₂ and CO were observed during both the seasons. The average monthly NH₃/NH₄ ⁺ ratios varied from 0.28 to 2.56 with an average value of 1.46 in winter. The higher NH₃/NH₄ ⁺ ratio (3.5) observed in summer indicates the abundance of NH₃ in the atmosphere during summer. The higher fraction of particulate NH₄ ⁺ observed in winter than summer attributes to the conversion of gaseous NH₃ into NH₄ ⁺. The results emphasized that the traffic could be one of the significant sources of ambient NH₃ at the urban site of Delhi as illustrated by positive correlations of NH₃ with traffic-related pollutants (NO, NO₂ and CO). Surface wind analysis and wind directions also support the roadside traffic and agricultural activities at the nearby area indicating possible major sources of ambient NH₃ at the study site.     

On the structure of sea-breeze fronts observed near the coastline of Thumba,India

An investigation has been made of the structure of sea-breeze fronts observed at Thumba mostly during the months of December to April using data from a Doppler SODAR and in situ measurements of wind components, humidity and temperature. The study shows that the vertical wind structure observed in the SODAR height range provides a distinct signature of the passage of a front and that the intensity of the front is decided by the intensity and direction of the prevailing winds as well as the amount of rotation of the wind vector during the onset of the sea-breeze. Spectral analyses of vertical winds during the passage of the front reveal a dominant periodicity of about 6 min for strong sea-breeze fronts.     

Rotational overthrusting of the northwestern Himalaya: further palaeomagnetic evidence from the Riasi thrust sheet, Jammu foothills, India

Thermal demagnetization results (316 samples) are presented for the Tertiary succession of the Riasi thrust sheet (Jammu foothills, northwestern Himalaya). Primary and secondary magnetization directions of Murree Group red beds (Miocene to Upper Eocene) sampled northeast of Jammu indicate, for this part of the Riasi thrust sheet, a clockwise rotation over about 45° with respect to the Indian shield since Late Eocene/Early Miocene time. This accords with clockwise rotations of similar magnitude observed in the Panjal Nappe and the Krol Belt, and is interpreted as representative for the northwestern Himalaya. Results from the western part of the Kalakot inlier, sampled northwest of Jammu, i.e. basal Murree claystone (Middle Eocene) and carbonate from the Subathu Group (lower Middle to Lower Eocene), indicate an aberrant 20–25° counterclockwise rotation which is of local importance only. Available observations on rotation of Himalayan thrust sheets with respect to the Indian shield, indicate that the Himalayan Arc has formed through oroclinal bending. This supports Powell and Conaghan's and Veevers et al.'s model of Greater India with large-scale intracontinental underthrusting along the Main Central Thrust beneath the Tibetan Plateau. Minimal magnitudes of underthrusting of 550 km in the Krol Belt and 650 km in the Thakkhola region are concluded. Palaeolatitude observations (herein and in [1[) agree with absolute positioning of the Indian plate based on India-Africa relative movement data fixed to a hotspot frame in the Atlantic Ocean, and with palaeolatitude observations from DSDP cores on the Indian plate. Collision-related secondary magnetic components observed both to the north and to the south of the Indus-Tsangpo Suture zone show palaeolatitudes between the equator and 7°N. Comparison of both datasets indicates that initial contact between Greater India and south-central Asia had been established in the Hindu Kush—Karakorum region by about 60 Ma ago whereas eastwards progressive suturing had advanced to the Lhasa Block segment of the Indus-Tsangpo Suture zone before 50 Ma ago.     

Fissures and fractures in the Koyna seismogenic zone,western India

Mn-rich ilmenites (up to 7 % MnO) have been identified in dykes cutting the Malanjkhand porphyry copper mining area in Madhya Pradesh. The dykes are hydrothermally altered and are of tholeiitic affinities. Lamprophyres have been reported from nearby areas. The presence of Mn-rich Ilmenites in the Malanjkhand copper mine dykes and the occurrence of lamprophyres and the pervasive potassium metasomatism in the area strongly suggests a possibility of finding diamondiferous rocks in the area. Such high-Mn bearing ilmenites are associated with diamondiferous deposits in other parts of the world, e.g. Juina kimberlites, Brazil. Mn-bearing ilmenite is considered as an indicator mineral for kimberlite/diamond occurrences. The presence of kimberlite pipes in Raipur district and the association of Mn-rich ilmenite with kimberlites is a fortuitous coincidence for venture-some mining companies. A probable explanation for the origin of manganese layers in the context of ‘rift’ tectonic environment is offered. Also a possible link between the dykes, quartz veins in the Malanjkhand granitic rocks and the copper mineralization is proposed.     

Measurement of Hubble constant: were differences in secondary distance indicators apparent as early as the HST Key Project?

Different measurements of the Hubble constant(H₀)are not consistent,and a tension between the CMB based methods and cosmic distance ladder based methods has been observed.Measurements from various distance based methods are also inconsistent.To aggravate the problem,the same cosmological probe(TypeⅠa SNe for instance)calibrated through different methods also provides different values of H₀.We compare various distance ladder based methods through the already available unique data obtained from the Hubble Space Telescope(HST).Our analysis is based on parametric(t-test)as well as non-parametric statistical methods such as the Mann-Whitney U test and Kolmogorov-Smirnov test.Our results show that different methods provide different values of H₀ and the differences are statistically significant.The biases in the calibration would not account for these differences as the data have been taken from a single telescope with a common calibration scheme.The unknown physical effects or issues with the empirical relations of distance measurement from different probes could give rise to these differences.