Groundwater flow and radioactivity in Namaqualand, South Africa

The Namaqualand area is located in the Northern Cape Province of South Africa which is characterised by arid climate where groundwater is the only source of water supply for local communities. Extensive groundwater sampling was carried out in the area and the physico-chemical parameters, inorganic constituents, stable isotopes and trace metals were measured. The hydrochemistry of the area indicates dissimilar groundwater composition due to complex geochemical processes where groundwater flow takes place from catchment F30A to the catchment D82B, and the chemistry is controlled primarily by Redox reaction, dissolution and mixing processes. The Br^?/Cl^? ratio revealed that the salinity in the area is derived from seawater mixing, halite dissolution and atmospheric deposition/sea aerosol spray. Under excessive evaporative condition due to climatic aridity, groundwater salinity shows increasing trend. Isotope results show the presence of shallow-weathered zone and deep-fracture controlled circulating groundwater in the crystalline basement aquifer of the area. In comparison to the South African water quality standard, the results obtained for gross alpha activity which could be derived from uranium isotopes show that 41 % of the reported data in the area fall above the drinking water limit.     

The Pliocene Yafo Formation in Israel: Hydrogeologically inert or active?

For several decades the “Saqiye beds” (later renamed Yafo Formation) underlying the Coastal Plain aquifer (Kurkar Group) aquifer of Israel, were regarded as an extremely thick, tectonically undisturbed, and absolutely impervious aquiclude. Following intensive groundwater exploitation from the overlying Kurkar Group aquifer, brackish and saline waters were locally encountered in the lower parts of this aquifer and always at the contact with the underlying Yafo Formation aquiclude. The present study revealed that this aquiclude is not a uniform and impervious rock unit, but rather an alternation of pervious and impervious strata within the Yafo Formation containing highly pressured fluids of different — mostly high — salinities. The permeable beds are at an angular unconformity and in direct contact with the overlying Kurkar Group aquifer. The Yafo Formation and the underlying and overlying rock units are dislocated by numerous fault systems, which facilitate accessibility of brines into the Kurkar Group aquifer. The mobilization of the saline fluids and their injection into the Kurkar Group aquifer could be due either to diffusion of saline fluids occurring in the permeable horizons of the Petah Tiqva Member through the clays of the Yafo Formation or to their upconing following intensive pumping in the Coastal Plain aquifer. It could have also been caused by up-dip movement of saline water as the result of overpressure generated by major accumulation of gas in the permeable horizons. Another possible mechanism could be hydraulic contact with pressurized brines up-flowing along fault zones from deep-seated Jurassic or Cretaceous reservoirs. The squeezing of saline interstitial water from the clays of the Yafo Formation into the overlying Kurkar Group aquifer, is of secondary importance for groundwater salinization (its input is comparable with salt input from rain).     

Nonlinear analysis of rainfall dynamics in California's Sacramento Valley

This study investigates the dynamic nature of rainfall observed at the Sustainable Agriculture Farming Systems (SAFS) site in California's Sacramento Valley, which was established to study the benefits of winter cover cropping in Mediterranean irrigated‐arid systems. Rainfall data of four different temporal scales (i.e. daily, weekly, biweekly, and monthly) are analysed to determine the dynamic nature of precipitation in time. In an arid climate with seasonal precipitation this has large implications for land and water management, both in the short term and in the long term. A nonlinear dynamic technique (correlation dimension method) that uses the phase‐space reconstruction and dimension concepts is employed. Bearing in mind the possible effects of the presence of zeros (i.e. no rain) on the outcomes of this analysis, an attempt is also made to compare the dynamic nature of all‐year rainfall and winter rainfall. Analysis of 15 years of data suggests that rainfall dynamics at this site are dominated by a large number of variables, regardless of the scales and seasons studied. The dimension results also suggest that: (1) rainfall dynamics at coarser resolutions are more irregular than that at finer resolutions; (2) winter rainfall has a higher variability than all‐year rainfall. These results are indeed useful to gain information about the complexity of the rainfall process at this site with respect to (temporal) scales and seasons and, hence, the appropriate model (high‐dimensional) type. However, in view of the potential effects of certain rainfall data characteristics (e.g. zeros, measurement errors, scale effects) on the correlation dimension analysis, the discussion also emphasizes the need for further verification, and possibly confirmation, of these results. Copyright © 2005 John Wiley & Sons, Ltd.     

Policy at the margins: developing community capacity in a rural Health Action Zone

The imperative to engage with communities and employ a community development approach is an integral part of the national agenda under New Labour. However, a large part of the literature and experience that informs contemporary policy and practice draws on the urban realm. This paper draws on the evaluation of a rural Health Action Zone to explore the extent to which national policy can facilitate local approaches to community health development within a rural context. Despite avowed support for innovation and evidence-based learning, it finds a continued emphasis on consensual tactics, low-cost solutions and traditional methods of ranking deprivation.     

Thermomineral waters of Ca-chloride composition: review of diagnostics and of brine evolution

 Ca-chloride waters are defined as those in which Q=rCa/r(SO₄+HCO₃)>1, rNa/rCl<0.80, rMg/rCa<0.5 and wCl/wBr<286 (r=meq l^–1 and w=mg l^–1). Throughout the last 50 years, different models for the formation of such waters have been suggested. These models include: (1) filtration through semipermeable membranes under conditions of highly compacted argillaceous sediments, (2) deaquation of seawater by evaporation and/or by freezing followed by dolomitization, (3) hydrolysis of plagioclase and biotites in igneous metamorphic rock masses, (4) radiolytic modification of residual metamorphic fluids, and (5) dissolution of chalks followed by ion exchange on smectites. The better understanding of processes and of natural environments leading to the evolution and natural occurrence of such brines, is imperative for the prospection and further sustained exploitation of such waters. Received: 11 October 1996 · Accepted: 24 February 1997     

The latest batch-to-batch difference table of standard seawater and its application to the WOCE onetime sections

An updated batch-to-batch difference table of IAPSO standard seawater (SSW) up to P145 is proposed. The batch-to-batch difference table is based on several recent SSW comparison experiments, including the experiments conducted independently at the Japan Agency for Marine-Earth Science and Technology (JAMSTEC) and Woods Hole Institute of Oceanography (WHOI) at about the same time using the same procedure. Proposed batch-to-batch differences range from 1.2 × 10⁻³ to −1.9 × 10⁻³ with reference to the average of those from P91 to P102. Batch-to-batch differences from P29 to P145 with reference to the recent batches and this average over every 5 years since 1960 are also presented, together with standard deviation. This reveals that inconsistency among batches has improved since 1980s. In particular, the standard deviation was 0.3 × 10⁻³ in this decade, which is about one-half the value reported previously and almost equal to the modern measurement precision (0.2 × 10⁻³) and is within-batch difference (<0.3 × 10⁻³). Proposed batch-to-batch differences were applied to the observational results of the WOCE hydrographic onetime section (WHP onetime) in the Indian Ocean. Average absolute salinity differences at 14 crossover points in the Indian Ocean were slightly larger, from 1.2 × 10⁻³ to 1.5 × 10⁻³, when the batch-to-batch difference table was applied; however, when results from the Indian, Pacific, and Atlantic Oceans were combined, application of the batch-to-batch difference table yielded statistically acceptable salinity differences. The table was also applied to WHP sections P1 and P17 (revisited about 10 years after the original observations during the WOCE period) and sections I1, I7, and I8 (visited twice by different research vessels in the same year). In all cases, the table corrected unrealistically large salinity changes in space and time. The results suggest that the application of the batch-to-batch table to well-controlled salinity data such as WOCE datasets would be effective in making the datasets more consistent in space and time.