中国新疆塔里木河流域的可持续灌溉农业--关于建立中国国家盐渍化研究实验室的建议

1　自然背景1.1　气候新疆是中国面积最大(约160万ｋｍ2)且最为干旱的省区,面积占60%的地势较低的地区(主要是塔里木和准葛尔盆地)的年均降雨量约为30ｍｍ,而山区(主要是阿尔泰,天山,昆仑山三大山脉)的年均降雨量约为250ｍｍ,部分地区高达600ｍｍ。盆地区域的大部分用水是来源于山区的常年性河川径流和众多的季节性小河流。新疆南部的年均蒸发量在2000～3400ｍｍ。1.2　盐渍化状况新疆的土壤盐渍化的范围很大。根据田长彦和宋郁东(1997)的研究,新疆80%的宜农荒地是盐渍化土壤,在耕作之前必须进行治理。土壤这的盐分主要来源于母岩的矿物和化…     

Thermal history of the unsaturated zone at Yucca Mountain,Nevada, USA

Secondary calcite, silica and minor amounts of fluorite deposited in fractures and cavities record the chemistry, temperatures, and timing of past fluid movement in the unsaturated zone at Yucca Mountain, Nevada, the proposed site of a high-level radioactive waste repository. The distribution and geochemistry of these deposits are consistent with low-temperature precipitation from meteoric waters that infiltrated at the surface and percolated down through the unsaturated zone. However, the discovery of fluid inclusions in calcite with homogenization temperatures (T_h) up to ∼80 °C was construed by some scientists as strong evidence for hydrothermal deposition. This paper reports the results of investigations to test the hypothesis of hydrothermal deposition and to determine the temperature and timing of secondary mineral deposition. Mineral precipitation temperatures in the unsaturated zone are estimated from calcite- and fluorite-hosted fluid inclusions and calcite δ¹⁸O values, and depositional timing is constrained by the ²⁰⁷Pb/²³⁵U ages of chalcedony or opal in the deposits. Fluid inclusion T_h from 50 samples of calcite and four samples of fluorite range from ∼35 to ∼90 °C. Calcite δ¹⁸O values range from ∼0 to ∼22‰ (SMOW) but most fall between 12 and 20‰. The highest T_h and the lowest δ¹⁸O values are found in the older calcite. Calcite T_h and δ¹⁸O values indicate that most calcite precipitated from water with δ¹⁸O values between −13 and −7‰, similar to modern meteoric waters.     

Diachronous evolution of volcano-sedimentary basins north of the Congo craton: Insights from U–Pb ion microprobe dating of zircons from the Poli, Lom and Yaoundé Groups (Cameroon)

Ion microprobe U–Pb dating of zircons from Neoproterozoic volcano-sedimentary sequences in Cameroon north of the Congo craton is presented. For the Poli basin, the depositional age is constrained between 700–665 Ma; detrital sources comprise ca. 920, 830, 780 and 736 Ma magmatic zircons. In the Lom basin, the depositional age is constrained between 613 and 600 Ma, and detrital sources include Archaean to Palaeoproterozoic, late Mesoproterozoic to early Neoproterozoic (1100–950 Ma), and Neoproterozoic (735, 644 and 613 Ma) zircons. The Yaoundé Group is probably younger than 625 Ma, and detrital sources include Palaeoproterozoic and Neoproterozoic zircons. The depositional age of the Mahan metavolcano-sedimentary sequence is post-820 Ma, and detrital sources include late Mesoproterozoic (1070 Ma) and early Neoproterozoic volcanic rocks (824 Ma). The following conclusions can be made from these data. (1) The three basins evolved during the Pan-African event but are significantly different in age and tectonic setting; the Poli is a pre- to syn-collisional basin developed upon, or in the vicinity of young magmatic arcs; the Lom basin is post-collisional and intracontinental and developed on old crust; the tectono-metamorphic evolution of the Yaoundé Group resulted from rapid tectonic burial and subsequent collision between the Congo craton and the Adamawa–Yade block. (2) Late Mesoproterozoic to early Neoproterozoic inheritance reflects the presence of magmatic event(s) of this age in west–central Africa.     

柴达木盆地北缘大柴旦地区古生代花岗岩锆石SHRIMP定年

大柴旦地区是柴北缘古生代超高压带的重要组成部分,与超高压岩石相伴的花岗岩十分发育。这些花岗岩具有两类不同的岩石地球化学特征,Ⅰ类以 Na_2O/K_2O 比值小于1、明显的负 Eu 异常和低 Sr、高 Y 为特征,具有 S-型花岗岩的属性,Ⅱ类以 Na_2O/K_2O 比值大于1、弱负 Eu 异常到正 Eu 异常和高 Sr、低 Y 为特征,具有Ⅰ-型花岗岩的属性,反映了它们的源岩及成因上的差异。锆石 SHRIMP U—Ph 定年结果表明,大柴旦地区花岗岩的年龄可分为三组,第一组年龄为446.3±3.9Ma,第二组年龄分别为408.6±4.4Ma、403.3±3.8Ma、401.8±3Ma,第三组年龄分别为374.5±1.6Ma、372±2.1Ma。结合区域地质特征,我们认为,第一组年龄可能反映了柴达木陆块与中南祁连板块碰撞的时代,第二组年龄可能反映了深俯冲地下的板块由于拆沉而折返的时代,第三组年龄可能反映了碰撞隆起后造山带上不同块体之间的伸展、滑塌的时代。     

Origin and evolution of the Steamboat Springs siliceous sinter deposit, Nevada, U.S.A.

Siliceous hot spring deposits from Steamboat Springs, Nevada, U.S.A., record a complex interplay of multiple, changing, primary environmental conditions, fluid overprinting and diagenesis. Consequently these deposits reflect dynamic geologic and geothermal processes. Two surface sinters were examined—the high terrace, and the distal apron-slope, as well as 13.11 m (43 ft) of core material from drill hole SNLG 87-29. The high terrace sinter consists of vitreous and massive-mottled silica horizons, while the distal deposit and core comprise dominantly porous, indurated fragmental sinters. Collectively, the three sinter deposits archive a complete sequence of silica phase diagenetic minerals from opal-A to quartz. X-ray powder diffraction analyses and infrared spectroscopy of the sinters indicate that the distal apron-slope consists of opal-A and opal-A/CT mineralogy; the core yielded opal-A/CT and opal-CT with minor opal-A; and the high terrace constitutes opal-C, moganite, and quartz. Mineralogical maturation of the deposit produced alternating nano–micro–nano-sized silica particle changes. Based on filament diameters of microbial fossils preserved within the sinter, discharging thermal outflows fluctuated between low-temperatures (< 35 °C, coarse filaments) and mid-temperatures ( 35–60 °C, fine filaments). Despite transformation to quartz, primary coarse and fine filaments were preserved in the high terrace sinter. AMS ¹⁴C dating of pollen from three horizons within core SNLG 87-29, from depths of 8.13 to 8.21 m (26′8″ to 26′11″), 10.13 to 10.21 m (33′3″ to 33′6″), and 14.81 to 14.88 m (48′7″ to 48′10″), yielded dates of 8684 ± 64 years, 11,493 ± 70 years and 6283 ±60 years, respectively. In the upper section of the core, the stratigraphically out-of-sequence age likely reflects physical mixing of younger sinter with quartzose sinter fragments derived from the high terrace. Within single horizons, mineralogical and morphological components of the sinter matrix were spatially patchy. Overall, the deposit was modified by sub-surface flow of alkali-chloride thermal fluids depositing a second generation of silica, and periodically, by acidic steam condensate formed during periods when the water table was low. Local faulting produced considerable fracturing of the sinter. Hence, the Steamboat Springs sinter experienced a complex history of primary and secondary hydrothermal, geologic and diagenetic events, and their inter-relationships and effects are locked within the physical, chemical and biological signatures of the deposit.     

Experimental silicate mineral/melt partition coefficients for beryllium and the crustal Be cycle from migmatite to pegmatite

Partition coefficients (D_Be^mineral/melt) for beryllium between hydrous granitic melt and alkali feldspars, plagioclase feldspars, quartz, dark mica, and white mica were determined by experiment at 200 MPa H₂O as a function of temperature (650-900°C), activity of Be in melt (trace levels to beryl saturation), bulk composition, and thermal run direction. At trace levels, Be is compatible in plagioclase of An₃₁ (1.84 at 700°C) and muscovite (1.35 at 700°C) but incompatible in biotite (0.39-0.54 from 650-800°C), alkali feldspar (0.38-0.19 from 680-850°C), quartz (0.24 at 800°C), and albite (0.10 at 750°C). The partition coefficients are different at saturation of the melt in beryl: lower in the case of plagioclase of An₃₁ (0.89 at 700°C), muscovite (0.87 at 700°C), biotite (0.18-0.08 from 675-800°C), alkali feldspar (0.18-0.14 from 680-700°C), and quartz (0.17-0.08 from 750-800°C), but higher in the case of albite (0.37 at 750°C).With other data sources, these new partition coefficients were utilized to track, first, the distribution of Be between aluminous quartzofeldspathic source rocks and their anatectic melts, and second, the dispersion or concentration of Be in melt through igneous crystal fractionation of different magma types (e.g., S-type, I-type) up to beryl-saturated granitic pegmatites and, finally, into their hydrothermal aureoles. Among the rock-forming minerals, cordierite, calcic oligoclase, and muscovite (in this order) control the fate of Be because of the compatibility of Be in these phases. In general, beryl-bearing pegmatites can arise only after extended crystal fractionation of large magma batches (to F, fraction of melt remaining, ≤0.05); granitic magmas that originate from cordierite-bearing protoliths or that contain large modal quantities of calcic oligoclase will not achieve beryl saturation at any point in their evolution.     

Prediction and monitoring of monsoon intraseasonal oscillations over Indian monsoon region in an ensemble prediction system using CFSv2

An ensemble prediction system (EPS) is devised for the extended range prediction (ERP) of monsoon intraseasonal oscillations (MISO) of Indian summer monsoon (ISM) using National Centers for Environmental Prediction Climate Forecast System model version 2 at T126 horizontal resolution. The EPS is formulated by generating 11 member ensembles through the perturbation of atmospheric initial conditions. The hindcast experiments were conducted at every 5-day interval for 45 days lead time starting from 16th May to 28th September during 2001–2012. The general simulation of ISM characteristics and the ERP skill of the proposed EPS at pentad mean scale are evaluated in the present study. Though the EPS underestimates both the mean and variability of ISM rainfall, it simulates the northward propagation of MISO reasonably well. It is found that the signal-to-noise ratio of the forecasted rainfall becomes unity by about 18 days. The potential predictability error of the forecasted rainfall saturates by about 25 days. Though useful deterministic forecasts could be generated up to 2nd pentad lead, significant correlations are found even up to 4th pentad lead. The skill in predicting large-scale MISO, which is assessed by comparing the predicted and observed MISO indices, is found to be ~17 days. It is noted that the prediction skill of actual rainfall is closely related to the prediction of large-scale MISO amplitude as well as the initial conditions related to the different phases of MISO. An analysis of categorical prediction skills reveals that break is more skillfully predicted, followed by active and then normal. The categorical probability skill scores suggest that useful probabilistic forecasts could be generated even up to 4th pentad lead.     

Stratiform Cloud—Inversion Characterization During the Arctic Melt Season

Data collected during July and August from the Arctic Ocean Experiment 2001 illustrated a common occurrence of specific-humidity (q) inversions, where moisture increases with height, coinciding with temperature inversions in the central Arctic boundary layer and lower troposphere. Low-level stratiform clouds and their relationship to temperature inversions are examined using radiosonde data and data from a suite of remote sensing instrumentation. Two low-level cloud regimes are identified: the canonical case of stratiform clouds, where the cloud tops are capped by the temperature inversion base (CCI—Clouds Capped by Inversion) and clouds where the cloud tops were found well inside the inversion (CII—Clouds Inside Inversion). The latter case was found to occur more than twice as frequently than the former. The characteristic of the temperature inversion is shown to have an influence on the cloud regime that was supported. Statistical analyses of the cloud regimes using remote sensing instruments suggest that CCI cases tend to be dominated by single-phase liquid cloud droplets; radiative cooling at the cloud top limits the vertical extent of such clouds to the inversion base height. The CII cases, on the other hand, display characteristics that can be divided into two situations—(1) clouds that only slightly penetrate the temperature inversion and exhibit a microphysical signal similar to CCI cases, or (2) clouds that extend higher into the inversion and show evidence of a mixed-phase cloud structure. An important interplay between the mixed-phase structure and an increased potential for turbulent mixing across the inversion base appears to support the lifetime of CII cases existing within the inversion layer.     

High spatial resolution hyperspectral mapping of in-stream habitats, depths, and woody debris in mountain streams

This article evaluates the potential of 1-m resolution, 128-band hyperspectral imagery for mapping in-stream habitats, depths, and woody debris in third- to fifth-order streams in the northern Yellowstone region. Maximum likelihood supervised classification using principal component images provided overall classification accuracies for in-stream habitats (glides, riffles, pools, and eddy drop zones) ranging from 69% for third-order streams to 86% for fifth-order streams. This scale dependency of classification accuracy was probably driven by the greater proportion of transitional boundary areas in the smaller streams. Multiple regressions of measured depths (y) versus principal component scores (x₁, x₂,…, x_n) generated R² values ranging from 67% for high-gradient riffles to 99% for glides in a fifth-order reach. R² values were lower in third-order reaches, ranging from 28% for runs and glides to 94% for pools. The less accurate depth estimates obtained for smaller streams probably resulted from the relative increase in the number of mixed pixels, where a wide range of depths and surface turbulence occurred within a single pixel. Matched filter (MF) mapping of woody debris generated overall accuracies of 83% in the fifth-order Lamar River. Accuracy figures for the in-stream habitat and wood mapping may have been misleadingly low because the fine-resolution imagery captured fine-scale variations not mapped by field teams, which in turn generated false “misclassifications” when the image and field maps were compared.The use of high spatial resolution hyperspectral (HSRH) imagery for stream mapping is limited by the need for clear water to measure depth, by any tree cover obscuring the stream, and by the limited availability of airborne hyperspectral sensors. Nonetheless, the high accuracies achieved in northern Yellowstone streams indicate that HSRH imagery can be a powerful tool for watershed-wide mapping, monitoring, and modeling of streams.     

Age of the Marwar Supergroup,NW India:A note on the U–Pb geochronology of Jodhpur Group felsic volcanics

The Marwar Supergroup(NW Peninsular India)is thought to be of Ediacaran-Cambrian age,based on previous paleontological and geochronological studies.However,direct constraints on the onset of sedimentation within the Marwar basin are still scarce.In this study,we report U–Pb zircon,LA-ICP-MS,and SIMS ages from the Chhoti Khatu felsic volcanic rocks,interlayered with the Jodhpur Group sandstones(Lower Marwar Supergroup).The cathodoluminescence images of the zircons indicate complex morphologies,and core-rim textures coupled with the wide range of ages indicate that they are likely inherited or in the case of thin poorly indurated ash-beds,detrital in origin.The age spectra of 68 zircon analyses from our sampling display a dominant 800–900 Ma age peak corresponding to the age of basement"Erinpura granite"rocks in the region.The youngest inherited zircon from a felsic ash layer yielded a U–Pb age of651 Ma±18 Ma that,together with previous studies and paleontological evidence,indicates a postCryogenian age for the initiation of Marwar sedimentation following a~125 Ma hiatus between the end of Malani magmatism and Marwar deposition.