Composition and Useful Properties of Tailings of Marine Manganese Nodules and Crusts

Marine manganese nodules and crusts, when processed, yield tailings which may be utilized for environmental and economic benefit. The key to the reasonable and effective utilization of these tailings lies in making a systematic appraisal of their composition and properties. This article gives an introduction to the investigation of manganese tailings properties. The tailings have a high iron and/or manganese content, high surface area, high porosity, and fine grain size. Some tailings have a high rare earth element content which is valuable. They may also have high SO₃, arsenic, and uranium contents which are harmful. Depending on the process used to produce the tailings, there will likely be some differences in chemical composition, mineral assemblages, surface area and adsorption capability, pore diameter and volume, density and pH. In assigning potentially beneficial applications for these tailings, these differences should be taken into account to optimize utilization.     

Mussels document loss of bioavailable polycyclic aromatic hydrocarbons and the return to baseline conditions for oiled shorelines in Prince William Sound, Alaska

Polycyclic aromatic hydrocarbons (PAH) were measured in mussels (Mytilus trossulus) collected between 1990 and 2002 from 11 sites on the shores of Prince William Sound (PWS), Alaska, that were heavily oiled by the 1989 Exxon Valdez oil spill (EVOS). This study, utilizing the methods of the NOAA Status and Trends Mussel Watch Program, found that concentrations of PAH released from spill remnants have decreased dramatically with time and by 2002 were at or near the range of total PAH (TPAH) of 3-355 ng/g dry weight obtained for mussels from unoiled reference sites in PWS. Time-series TPAH data indicate a mean TPAH half-life in mussel tissues of 2.4 years with a range from 1.4 to 5.3, yielding an annual mean loss of bioaccumulated TPAH of 25%. The petroleum-derived TPAH fraction in mussel tissues has decreased with time, reflecting the decreasing release of EVOS residues in shoreline sediments. These results show that PAH from EVOS residues that remain buried in shoreline sediments after the early 1990s are in a form and at locations that have a low accessibility to mussels living in the intertidal zone.     

Organic matter in deepwater sediments of the Northern Gulf of Mexico and its relationship to the distribution of benthic organisms

Sediment samples were selected from 28 sites across the deep (212–3527 m) northern Gulf of Mexico (GOM) as part of the Deep Gulf of Mexico Benthos (DGoMB) program, and analyzed for geochemical parameters related to organic carbon (OC) distribution and characteristics. The results of this study indicate that the OC content of sediments in the deep northern GOM is controlled by several factors; including water depth, overlying water productivity, sediment carbonate content, sediment oxygen exposure time, OC sources, and regional influences. The best correlation between sediment OC content, on a CaCO₃-free basis, and other parameters examined was an inverse correlation of OC with water depth. The OC/SA ratio had a wide range of values and, along with variable sources of sedimentary OC, indicated that the organism-available concentration of metabolizable organic matter may not be simply related to sedimentary OC content. This was perhaps reflected in the observation that benthic macrofaunal and meiofaunal biomass abundances were well correlated with sedimentary OC, but the abundance of bacteria in sediments was not.     

Parameter estimation for basin-scale ecosystem-linked population models of large pelagic predators: Application to skipjack tuna

A Spatial Ecosystem and Population Dynamic Model (SEAPODYM) is used in a data assimilation study aiming to estimate model parameters that describe dynamics of Pacific skipjack tuna population on ocean-based scale. The model based on advection–diffusion–reaction equations explicitly predicts spatial dynamics of large pelagic predators, while taking into account data on several mid-trophic level components, oceanic primary productivity and physical environment. In order to improve its quantitative ability, the model was parameterized through assimilation with commercial fisheries data, and optimization was carried out using maximum likelihood estimation approach. To address the optimization task we implemented an adjoint technique to obtain an exact, analytical evaluation of the likelihood gradient. We conducted a series of computer experiments in order to (i) determine model sensitivity with respect to variable parameters and, hence, investigate their observability; (ii) estimate observable parameters and their errors; and (iii) justify the reliability of the computed solution. Parameters describing recruitment, movement, habitat preferences, natural and fishing mortality of skipjack population were analysed and estimated. Results of the study suggest that SEAPODYM with achieved parameterization scheme can help to investigate the impact of fishing under various management scenarios, and also conduct forecasts of a given species stock and spatial dynamics in a context of environmental and climate changes.     

Holocene sedimentation of a wave-dominated barrierisland shoreline: Cape Lookout, North Carolina

The sedimentary record of 130 km of microtidal (0.9 m tidal range) high wave energy (1.5 m average wave height) barrier island shoreline of the Cape Lookout cuspate foreland has been evaluated through examination of 3136 m of subsurface samples from closely spaced drill holes. Holocene sedimentation and coastal evolution has been a function of five major depositional processes: (1) eustatic sea-level rise and barrier-shoreline transgression; (2) lateral tidal inlet migration and reworking of barrier island deposits; (3) shoreface sedimentation and local barrier progradation; (4) storm washover deposition with infilling of shallow lagoons; and (5) flood-tidal delta sedimentation in back-barrier environments.

Twenty-five radiocarbon dates of subsurface peat and shell material from the Cape Lookout area are the basis for a late Holocene sea-level curve. From 9000 to 4000 B.P. eustatic sea level rose rapidly, resulting in landward migration of both barrier limbs of the cuspate foreland. A decline in the rate of sea-level rise since 4000 B.P. resulted in relative shoreline stabilization and deposition of contrasting coastal sedimentary sequences. The higher energy, storm-dominated northeast barrier limb (Core and Portsmouth Banks) has migrated landward producing a transgressive sequence of coarse-grained, horizontally bedded washover sands overlying burrowed to laminated back-barrier and lagoonal silty sands. Locally, ephemeral tidal inlets have reworked the transgressive barrier sequence depositing fining-upward spit platform and channel-fill sequences of cross-bedded, pebble gravel to fine sand and shell. Shoreface sedimentation along a portion of the lower energy, northwest barrier limb (Bogue Banks) has resulted in shoreline progradation and deposition of a coarsening-up sequence of burrowed to cross-bedded and laminated, fine-grained shoreface and foreshore sands. In contrast, the adjacent barrier island (Shackleford Banks) consists almost totally of inlet-fill sediments deposited by lateral tidal inlet migration. Holocene sediments in the shallow lagoons behind the barriers are 5–8 m thick fining-up sequences of interbedded burrowed, rooted and laminated flood-tidal delta, salt marsh, and washover sands, silts and clays.

While barrier island sequences are generally 10 m in thickness, inlet-fill sequences may be as much as 25 m thick and comprise an average of 35% of the Holocene sedimentary deposits. Tidal inlet-fill, back-barrier (including flood-tidal delta) and shoreface deposits are the most highly preservable facies in the wave-dominated barrier-shoreline setting. In the Cape Lookout cuspate foreland, these three facies account for over 80% of the sedimentary deposits preserved beneath the barriers. Foreshore, spit platform and overwash facies account for the remaining 20%.     

Kinetic studies of the rate of dissolution of silica and diatom tests in sea water

Kinetic studies have been carried out on the dissolution of 10μm beads of silica and of the siliceous tests of two species of diatoms (Thalassiosira fluviatus andSkeletonema costatum) in sea water at 10–50°C and over the pH range 6–9. At all temperatures dissolution of the biogenous silica occurred most rapidly at pH 8 and most slowly at pH 6. First order kinetics were closely followed when the silica was present in a considerable excess over that required for saturation, the rate being proportional to the area of the silica. Apparent deviation from this type of kinetics occurred when there was insufficient silica to bring about saturation. This was undoubtedly due to the progressive decrease in the surface area which takes place as the particle dissolves. Application of the rather simplistic model developed by Kamataniet al. (1980), which makes allowance for this decrease, gave a close correspondence with the data until ∼ 90% of the silica had dissolved.     

Simultaneous exposure of English sole (Parophrys vetulus) to sediment-associated xenobiotics: Part 1—uptake and disposition of 14C-polychlorinated biphenyls and 3H-benzo[a]pyrene

English sole (Parophrys vetulus) were exposed to environmentally realistic levels of sediment-associated ³H-benzo[a]pyrene (3 μg BaP/g sediment, dry weight) and ¹⁴C-Aroclor 1254 (1 μg PCBs/g), separately and together, for up to 10 days. BaP and its metabolites in tissues reached steady-state concentrations by the first day of the exposure, whereas PCBs did not approach steady-state concentrations until the tenth day of exposure. Simultaneous exposure of sole to BaP and PCBs, relative to separate exposure to the xenobiotics, significantly increased the concentrations of BaP-derived radioactivity and decreased the concentrations of PCB-derived radioactivity in some tissues and bile. Accumulation of PCB-derived radioactivity, estimated as the burden in tissues, was significantly greater (4- to 13-fold) than that of BaP-derived radioactivity throughout the experiments and regardless of the type of exposure. The rank of the concentrations of PCB-derived radioactivity in tissues and bile was: bile ～ liver > brain > kidney ～ gill > skin ～ blood ～ muscle and for BaP-derived radioactivity the order was: bile > liver > gill > kidney > skin ～ blood > muscle > brain. BaP-derived radioactivity in liver and bile was present primary (85–99%) as metabolites, whereas PCB-derived radioactivity was present equally as parent compounds and metabolites in bile and primarily (98 %) as parent compounds in liver. Hydrolysis of bile from PCB/BaP-exposed sole with β-glucuronidase/arylsulfatase released 35 % of the BaP-derived radioactivity and 32 % of the PCB-derived radioactivity as primary metabolites. A much higher proportion of the BaP-derived radioactivity (64 %) than the PCB-derived radioactivity (13 %) in bile was unaffected by the enzyme treatment, indicating differences in the conjugation of the primary metabolites of PCBs and BaP. The results suggest that in contaminated environments the tissue to sediment concentration ratios for PCBs would exceed that for BaP and its metabolites; however, BaP would be continually absorbed and metabolized by sole to potentially carcinogenic and mutagenic compounds. In addition, the tissue levels of these toxic compounds may be increased by simultaneous exposure to PCBs.     

Reflection of surface waves by submerged cylinders

Reflection from submerged cylinders are studied by means of integral equations. By expressing the solution as a distribution of vortices, the integral equations become non-singular for closed contours. It is shown that the method gives a short and easy proof for the classical result that no reflection occurs for the circular cylinder. The reflection power for the elliptic contour and the flat plate are studied when the bodies are situated deeply below the surface.     

Precipitation of heavy metals in produced water: influence on contaminant transport and toxicity

Produced water undergoes changes in its physical chemistry including precipitation of heavy metals after being discharged and mixed with ambient seawater. Potential impacts of the precipitation of heavy metals on their transport and toxicity were studied using samples from offshore oil production sites on the Scotian Shelf off eastern Canada. Concentrations of aluminum, cadmium, chromium, cobalt, copper, iron, lead, manganese, nickel and zinc were measured in total, particulate and dissolved fractions together with Microtox tests for assessment of toxicity. Heavy metals in produced water were transformed from dissolved to particulate phase in a period of hours under oxygenated conditions, and aggregated to larger particles that settle rapidly (>100 m/day) over a few days. In addition, there was production of buoyant particles comprised of heavy metal precipitates sequestered onto oil droplets that were transported to the surface. The particulate fraction was generally more toxic than the dissolved fraction. This was evident at the mixing interface between produced water and seawater where elevated particulate and toxicity levels were observed. Laboratory studies suggest an increase in the toxicity of discharged produced water over time. Time-series experiments showed a sustained toxic response for more than a week following the oxidation of freshly discharged produced water that initially elicited little or no toxic response in the Microtox test. Chemical processes identified in this study, namely precipitation of heavy metals and consequent settling and rising fluxes of particles, will influence the toxicity, the fate and the transport of potential contaminants in the produced water. Therefore, these processes need to be considered in assessment of the environmental impact associated with offshore oil and gas operations.