The Qso Hosts I Zw 1 and 3C 48: Prototypes of a Merger-Driven Quasar Evolution?

I Zw 1 and 3C 48 are two neighboring template objects at a later stage of the hypothesized merger-driven evolutionary sequence from ultra-luminous infrared galaxies (ULIRGs) to quasi-stellar objects (QSOs). Since galaxy mergers are assumed to trigger the evolution, it is important to confirm the merger properties of transitionary objects. Using multi-wavelength observations and N-body simulations, the merger histories of I Zw 1 and 3C 48 have been investigated in two separate case studies. Here, the results from both studies are compared and their relevance for the evolutionary hypothesis is discussed.This research is partly based on observations with ISAAC at the Very Large Telescope (VLT) of the European Southern Observatory (ESO) under projects 67.B-0009 and 67.B-0019.     

Dehydration melting of tonalites. Part I. Beginning of melting

 The beginning of dehydration melting in the tonalite system (biotite-plagioclase-quartz) is investigated in the pressure range of 2–12 kbar. A special method consisting of surrounding a crystal of natural plagioclase (An₄₅) with a biotite-quartz mixture, and observing reactions at the plagioclase margin was employed for precise determination of the solidus for dehydration melting. The beginning of dehydration melting was worked out at 5 kbar for a range of compositions of biotite varying from iron-free phlogopite to iron-rich Ann₇₀, with and without titanium, fluorine and extra aluminium in the biotite. The dehydration melting of phlogopite + plagioclase (An₄₅) + quartz begins between 750 and 770°C at pressures of 2 and 5 kbar, at approximately 740°C at 8 kbar and between 700 and 730°C at 10 kbar. At 12 kbar, the first melts are observed at temperatures as low as 700°C. The data indicate an almost vertical dehydration melting solidus curve at low pressures which bends backward to lower temperatures at higher pressures (> 5 kbar). The new phases observed at pressures ≤ 10 kbar are melt + enstatite + clinopyroxene + potassium feldspar ± amphibole. In addition to these, zoisite was also observed at 12 kbar. With increasing temperature, phlogopite becomes enriched in aluminium and deficient in potassium. Substitution of octahedral magnesium by aluminium and titanium in the phlogopite, as well as substitution of hydroxyl by fluorine, have little effect on the beginning of dehydration melting temperatures in this system. The dehydration melting of biotite (Ann₅₀) + plagioclase (An₄₅) + quartz begins 50°C below that of phlogopite bearing starting composition. Solid reaction products are orthopyroxene + clinopyroxene + potassium feldspar ± amphibole. Epidote was also observed above 8 kbar, and garnet at 12 kbar (750°C). The experiments on the iron-bearing system performed at ≤ 5 kbar were buffered with NiNiO. The f _{O 2} in high pressure runs lies close to CoCoO. With the substitution of octahedral magnesium and iron by aluminium and titanium, and replacement of hydroxyl by fluorine in biotite, the beginning of dehydration melting temperatures in this system increase up to 780°C at 5 kbar, which is 70°C above the beginning of dehydration melting of the assemblage containing biotite (Ann₅₀) of ideal composition. The dehydration melting at 5 kbar in the more iron-rich Ann₇₀-bearing starting composition begins at 730°C, and in the Ann₂₅-bearing assemblage at 710°C. This indicates that quartz-biotite-plagioclase assemblages with intermediate compositions of biotite (Ann₂₅ and Ann₅₀) melt at lower temperatures as compared to those containing Fe-richer or Mg-richer biotites. This study shows that the dehydration melting of tonalites may begin at considerably lower temperatures than previously thought, especially at high pressures (>5 kbar). Received: 27 December 1995 / Accepted: 7 May 1996     

Calibrating the GOCE accelerations with star sensor data and a global gravity field model

A reliable and accurate gradiometer calibration is essential for the scientific return of the gravity field and steady-state ocean circulation explorer (GOCE) mission. This paper describes a new method for external calibration of the GOCE gradiometer accelerations. A global gravity field model in combination with star sensor quaternions is used to compute reference differential accelerations, which may be used to estimate various combinations of gradiometer scale factors, internal gradiometer misalignments and misalignments between star sensor and gradiometer. In many aspects, the new method is complementary to the GOCE in-flight calibration. In contrast to the in-flight calibration, which requires a satellite-shaking phase, the new method uses data from the nominal measurement phases. The results of a simulation study show that gradiometer scale factors can be estimated on a weekly basis with accuracies better than 2 × 10⁻³ for the ultrasensitive and 10⁻² for the less sensitive axes, which is compatible with the requirements of the gravity gradient error. Based on a 58-day data set, scale factors are found that can reduce the errors of the in-flight-calibrated measurements. The elements of the complete inverse calibration matrix, representing both the internal gradiometer misalignments and scale factors, can be estimated with accuracies in general better than 10⁻³.     

On the impact of salinity observations on state estimates in Ems Estuary

The hydrodynamics of Ems Estuary are dominated by tides and their interaction with buoyancy forcing. Such an environment is challenging for any effort to bring together observations and model results. In this study, we investigate how salinity measurements in the Ems Estuary affect the reconstruction of the salinity field. Similar to the traditional observing system experiments, the impact of specific observational arrays is simulated in the framework of statistical experiments. The experimental algorithm mainly relies on the model covariance matrix. Each experiment results in an estimate of the reconstruction error. The analysed observation configurations involve single and multiple, as well as stationary and non-stationary observing arrays. Generally, the reconstruction of the ocean state improves with increasing the density of observations. It appears that certain locations are more favourable for reconstruction than others. In fact, the regions separating the main dynamical realms resist strongest to the reconstruction effort. Extending the covariance matrix by the temporal cross-covariances between the model grid points enables to evaluate the impact of observations taken from a moving platform. This approach further improves the outcome of the experiments, resulting in reconstruction errors near zero with the exception of the tidal river. The cross-covariance information is able to tackle even the irregular dynamics arising on the border between the different physical regimes.     

Preprocessing of gravity gradients at the GOCE high-level processing facility

One of the products derived from the gravity field and steady-state ocean circulation explorer (GOCE) observations are the gravity gradients. These gravity gradients are provided in the gradiometer reference frame (GRF) and are calibrated in-flight using satellite shaking and star sensor data. To use these gravity gradients for application in Earth scienes and gravity field analysis, additional preprocessing needs to be done, including corrections for temporal gravity field signals to isolate the static gravity field part, screening for outliers, calibration by comparison with existing external gravity field information and error assessment. The temporal gravity gradient corrections consist of tidal and nontidal corrections. These are all generally below the gravity gradient error level, which is predicted to show a 1/f behaviour for low frequencies. In the outlier detection, the 1/f error is compensated for by subtracting a local median from the data, while the data error is assessed using the median absolute deviation. The local median acts as a high-pass filter and it is robust as is the median absolute deviation. Three different methods have been implemented for the calibration of the gravity gradients. All three methods use a high-pass filter to compensate for the 1/f gravity gradient error. The baseline method uses state-of-the-art global gravity field models and the most accurate results are obtained if star sensor misalignments are estimated along with the calibration parameters. A second calibration method uses GOCE GPS data to estimate a low-degree gravity field model as well as gravity gradient scale factors. Both methods allow to estimate gravity gradient scale factors down to the 10⁻³ level. The third calibration method uses high accurate terrestrial gravity data in selected regions to validate the gravity gradient scale factors, focussing on the measurement band. Gravity gradient scale factors may be estimated down to the 10⁻² level with this method.     

Debating clean energy: Frames,counter frames,and audiences

In the United States, both scholars and practitioners have repeatedly emphasized the importance of “issue framing” for garnering public support for climate change policy. However, the debate frequently overlooks the importance of counter frames. For every framing attempt by advocates of climate policy, there will be a counter frame by the opponents of climate policy. How do counter frames influence the effectiveness of issue framing as a communication strategy? To answer this question, we report results from a survey experiment on a nationally representative sample of 1000 Americans on clean energy policy, a key policy issue in the public debate on climate change in the United States. Overall, we find that different combinations of positive and negative frames have remarkably little effect on support for clean energy policy. A follow-up on-line survey experiment with a convenience sample of 2000 Americans suggests that the counter frames are responsible for undermining the effects of the original frames.     

Black carbon decomposition under varying water regimes

The stability of biomass-derived black carbon (BC) or biochar as a slow cycling pool in the global C cycle is an important property and is likely governed by environmental conditions. This study investigated the effects of water regimes (saturated, unsaturated and alternating saturated–unsaturated conditions) and differences in BC materials, produced by carbonizing corn residues and oak wood at two temperatures (350 °C and 600 °C) on BC degradation at 30 °C over 1 year in a full factorial experiment. Effects of water regime on C loss and potential cation exchange capacity (CECp at pH 7) significantly depended on biomass type. Corn BC was both mineralized (16% C loss for the first year) and was oxidized [1000 mmole(+) kg^?1 C] significantly faster under unsaturated conditions than under other water regimes, whereas oak BC mineralized most rapidly (12%) under alternating saturated–unsaturated conditions with similar oxidation, irrespective of water regime. Over 1 year of saturated incubation, the O/C ratio values did not significantly (P > 0.05) increase even though BC was mineralized by 9% and CECp increased by 170 mmole(+) kg^?1 C, in contrast to unsaturated and alternating saturated–unsaturated conditions. While mineralization and oxidation significantly decreased at higher charring temperature for corn, no difference was observed for oak (P > 0.05). Unsaturated and alternating conditions increased carboxylic and OH functional groups, while they decreased aliphatic groups. The pH increased by about one unit for corn BC, but decreased by 0.2 units for oak BC, indicating strong mineral dissolution of corn BC. Carbon loss strongly correlated with changes in O/C values of both corn BC and oak BC, indicating that oxidation of BC was most likely the major mechanism controlling its stability. However, under saturated conditions, additional mechanisms may govern BC degradation and require further investigation.     

Insights into agricultural influences and weathering processes from major ion patterns

Karst areas and their catchments pose a great challenge for protection because fast conduit flow results in low natural attenuation of anthropogenic contaminants. Studies of the hydrochemistry of karst sources and river solutes are an important tool for securing and managing water resources. A study of the geochemical downriver evolution of the Wiesent River and its tributaries, located in a typical karst terrain, revealed unexpected downstream decreases of nitrate with maximum mean values of 30 mg/L at the source to minimum values of 18 mg/L near the river mouth. This trend persisted over the length of the river even though increased agricultural activities are evident in the downstream section of the catchment. This pattern is caused by fertilizer inputs via diffusive and fast conduits flow from karst lithology in the upstream area that may have reached the river's source even from beyond the hydrological catchment boundaries. Further downstream, these influences became diluted by tributary inputs that drain subcatchments dominated by claystone and sandstone lithologies that increased potassium and sulphate concentrations. Our findings indicate that bedrock geology remains the dominant control on the major ion chemistry of the Wiesent River and that agricultural influences are strongest near the headwaters despite increased land use further downstream, due to long‐term storage and accumulation in karst aquifers. This feature may not be unique to the Wiesent River system, as carbonates cover significant portions of the Earth's surface and subsequent work in other river systems could establish whether such patterns are ubiquitous worldwide.     

Kandidater udgået fra Københavns Universitets Geografiske Institut 1966–71

Christensen, Leif: Faststående og omlejrede Saale-morånelersaflejringer. Et eksempel fra Szdding-området, Vestjylland. Geografisk Tidsskrift 82: 91–94. Copenhagen, Dec. 1, 1982.

In situ clayey till materials on the Skovbjerg Bakkea, western Jutland can be recognized by crop-marks revealing pseudomorphs of ice-wedge polygons in orthogonal, random orthogonal and hexagonal patterns. The tills inside these polygonal patterns have high shear-strength values as measured by vane tests. Remoulded fossil solifluction deposits of till origin reveal stripes and deformed polygonal patterns in the crops. High strength as measured by vane are encountered below fossil solifluction deposits 4 meters below ground.