Petrology of the Easter microplate region in the South Pacific

Submersible investigations along the East Rift segments, the Pito Deep and the Terevaka transform fault of the Easter microplate eastern boundary, and on a thrust-fault area of the Nazca Plate collected a variety of basalts and dolerites. The volcanics consist essentially of depleted (N-MORB), transitional (T-MORB) and enriched (E-MORB) basalts with low (0.01−0.1, < 0.7), intermediate (0.12–0.25, 0.7–1.2) and high (> 0.25, > 1.2–2) K/Ti and(La/Sm)_N ratios, respectively. The Fe-Ti-rich ferrobasalt encountered among the N-MORBs are found on the Pito Deep Central volcano, on the Terevaka intra-transform ridge, on the ancient (< 2.5 Ma) Easter microplate (called EMP, comprising the East Rift Inner pseudofaults and Pito Deep west walls) and on thrust-fault crusts. The most enriched (T- and E-MORB) volcanics occur along the East Rift at 25 °50′–27 °S (called 26 °S East Rift) and on the Pito seamount located near the tip of the East Rift at 23 °00′–23 °40′S (called 23 °S East Rift). The diversity in incompatible element ratios of the basalts in relation to their structural setting suggests that the volcanics are derived from a similar heterogenous mantle which underwent variable degrees of partial melting and magma mixing. In addition the Pito seamount volcanics have undergone less crystal fractionation (< 20%) than the lavas from the other Easter microplate structures (up to 35–45%). The tectonic segmentation of the East Rift observed between 23 and 27 °S corresponds to petrological discontinuities related to Mg# variations and mantle melting conditions. The highest Mg# (> 61) are found on topographic highs (2000–2300 m) and lower values (Mg# < 56) at the extremities of the East Rift segments (2500–5600 m depths). The deepest area (5600 m) along the East Rift is located at 23 °S and coincides with a Central volcano constructed on the floor of the Pito Deep. Three major compositional variabilities of the volcanics are observed along the East Rift segments studied: (1) the 26 °S East Rift segment where the volcanics have intermediate Na₈ (2.5–2.8%) and Fe₈ (8.5–11%) contents; (2) the 23 °S East Rift segment (comprising Pito seamount and Pito Deep Central volcano) which shows the highest (2.9–3.4%) values of Na₈ and a low (8–9%) Fe₈ content; and (3) the 25 °S (at 24 °50′–26 °10′S) and the 24 °S (at 24 °10′–25 °S) East Rift segments where most of the volcanics have low to intermediate Na₈ (2.6–2.0%) and a high range of Fe₈ (9–13%) contents. When modeling mantle melting conditions, we observed a relative increase in the extent of partial melting and decreasing melting pressure. These localized trends are in agreement with a 3-D type diapiric upwelling in the sense postulated by Niu and Batiza (1993). Diapiric mantle upwelling and melting localized underneath the 26, 25 and 23 °S (Pito seamount and Central volcano) East Rift segments are responsable for the differences observed in the volcanics. The extent of partial melting varies from 14 to 19% in the lithosphere between 18 and 40 km deep as inferred from the calculated initial (P_o=16kbar) and final melting (P_f=7kbar) pressures along the various East Rift segments. The lowest range of partial melting (14–16%) is confined to the volcanics from 23 °S East Rift segment including the Pito seamount and the Central volcano. The Thrust-fault area, and the Terevaka intra-transform show comparable mantle melting regimes to the 25 and 26 °S East Rift segments. The older lithosphere of the EMP interior is believed to have been the site of high partial melting (17–20%) confined to the deeper melting area (29–50 km). This increase in melting with increasing pressure is similar to the conditions encountered underneath the South East Pacific Rise (13–20 °S).     

Current Scientific and Applied Problems of River Mouth Hydrology

Water Resources - The current state, the hydrological problems of river mouths, and the history of their studies as specific geographic objects are discussed, and the main lines and schools of...     

Thallium isotope variations in an ore-bearing continental igneous setting: Collahuasi Formation, northern Chile

Thallium is a highly incompatible element and a large fraction of the bulk silicate Earth Tl budget is, therefore, expected to reside in the continental crust. Nonetheless, the Tl isotope systematics of continental rocks are essentially unexplored at present. Here, we present new Tl isotope composition and concentration data for a suite of 36 intrusive and extrusive igneous rocks from the vicinity of porphyry Cu deposits in the Collahuasi Formation of the Central Andes in northern Chile. The igneous lithologies of the rocks are variably affected by the hydrothermal alteration that accompanied the formation of the Cu deposits.The samples display Tl concentrations that vary by more than an order of magnitude, from 0.1 to 3.2 μg/g, whilst ε²⁰⁵Tl ranges between −5.1 and +0.1 (ε²⁰⁵Tl is the deviation of the ²⁰⁵Tl/²⁰³Tl isotope ratio of a sample from a standard in parts per 10⁴). These variations are primarily thought to be a consequence of hydrothermal alteration processes, including metasomatic transport of Tl, and formation/breakdown of Tl-bearing minerals, which are associated with small but significant Tl isotope effects. The Tl abundances show excellent correlations with both K and Rb concentrations but no co-variation with Cu. This demonstrates that Tl displays only limited chalcophile affinity in the continental crust of the Collahuasi Formation, but behaves as a lithophile element with a distribution that is primarily governed by partitioning of Tl⁺ into K⁺-bearing phases. Collahuasi samples with propylitic alteration features, which are derived from the marginal parts of the hydrothermal systems, have, on average, slightly lighter Tl isotope compositions than rocks from the more central sericitic and argillic alteration zones. This small but statistically significant difference most likely reflects preferential retention of isotopically heavy Tl in alteration phases, such as white micas and clays, which formed during sericitic and argillic alteration.     

Observation of temporal and spatial variations in the Fe/O charge composition of the solar particle event of 4 July, 1974

Comprehensive measurements of the temporal variations of the Z 6 charge composition in the 4 July 1974 solar event made with experiments aboard IMP-7 and 8 show that large variations in the charge composition occur in three-hour-averaged intensities. Hourly averaged fluxes show variations as large as factors of 3 to 4 from one hour to the next and 3 hour averages show nearly a factor of 10 peak to minimum over the event. The precision of the measurements are limited by counting statistics of the Fe-group channel. Iron to oxygen variations are established by both rate channel and pulse height analysis techniques. Comparison of measurements from IMP-7 and 8, separated by about 70 R _E shows that, while significant differences in composition and intensity exist for brief periods, the gross compositional variations are reproduced well at both spacecraft. These observations provide particularly stringent conditions for theories of the acceleration, release, and propagation of solar energetic particles.     

Compressibility and crystal structure of sillimanite, Al2SiO5, at high pressure

The unit-cell dimensions and crystal structure of sillimanite at various pressures up to 5.29 GPa have been refined from single-crystal X-ray diffraction data. As pressure increases, a and b decrease linearly, whereas c decreases nonlinearly with a slightly positive curvature. The axial compression ratios at room pressure are β_a:β_b:β_c=1.22:1.63:1.00. Sillimanite exhibits the least compressibility along c, but the least thermal expansivity along a (Skinner et al. 1961; Winter and Ghose 1979). The bulk modulus of sillimanite is 171(1) GPa with K′=4 (3), larger than that of andalusite (151 GPa), but smaller than that of kyanite (193 GPa). The bulk moduli of the [Al1O₆], [Al2O₄], and [SiO₄] polyhedra are 162(8), 269(33), and 367(89) GPa, respectively. Comparison of high-pressure data for Al₂SiO₅ polymorphs reveals that the [SiO₄] tetrahedra are the most rigid units in all these polymorphic structures, whereas the [AlO₆] octahedra are most compressible. Furthermore, [AlO₆] octahedral compressibilities decrease from kyanite to sillimanite, to andalusite, the same order as their bulk moduli, suggesting that [AlO₆] octahedra control the compression of the Al₂SiO₅ polymorphs. The compression of the [Al1O₆] octahedron in sillimanite is anisotropic with the longest Al1-OD bond shortening by ～1.9% between room pressure and 5.29 GPa and the shortest Al1-OB bond by only 0.3%. The compression anisotropy of sillimanite is primarily a consequence of its topological anisotropy, coupled with the compression anisotropy of the Al-O bonds within the [Al1O₆] octahedron.     

Development of a Continental Volcanic Field: Petrogenesis of Pre-caldera Intermediate and Silicic Rocks and Origin of the Bandelier Magmas, Jemez Mountains (New Mexico, USA)

The Miocene–Quaternary Jemez Mountains volcanic field(JMVF) is the site of the Valles caldera and associated BandelierTuff. Caldera formation was preceded by > 10 Myr of volcanismdominated by intermediate composition rocks (57–70% SiO₂)that contain components derived from the lithospheric mantleand Precambrian crust. Simple mixing between crust-dominatedsilicic melts and mantle-dominated mafic magmas, fractionalcrystallization, and assimilation accompanied by fractionalcrystallization are the principal mechanisms involved in theproduction of these intermediate lavas. A variety of isotopicallydistinct crustal sources were involved in magmatism between13 and 6 Ma, but only one type (or two very similar types) ofcrust between 6 and 2 Ma. This long history constitutes a recordof accommodation of mantle-derived magma in the crust by meltingof country rock. The post-2 Ma Bandelier Tuff and associatedrhyolites were, in contrast, generated by melting of hybridizedcrust in the form of buried, warm intrusive rocks associatedwith pre-6 Ma activity. Major shifts in the location, styleand geochemical character of magmatism in the JMVF occur withina few million years after volcanic maxima and may correspondto pooling of magma at a new location in the crust followingsolidification of earlier magma chambers that acted as trapsfor basaltic replenishment. KEY WORDS: crustal anatexis; fractional crystallization; Jemez Mountain Volcanic Field; Valles Caldera; radiogenic isotopes; trace elements     

Arsenic contamination in groundwater and its proposed remedial measures

Arsenic contamination occurs in groundwater of Bangladesh mainly from the alluvial and deltaic sediments. Arsenic contamination of groundwater in Bangladesh was first detected more than a decade ago and the ’shallow tubewells’ were reported as the main source of arsenic contaminated water. From the nutritional and metabolic points of view, arsenic is likely to adversely affect human health and nutrition. Up to now, several studies have been carried out on this context; however, inadequate knowledge on arsenic sources, mobilization and transport still remains as a constraint due to lack of data, information and technological advances. Thus, a review study has been undertaken on the sources of arsenic, its causes, mobilization, transport, effects on human health, arsenic test procedures and removal methods, in the context of groundwater contamination in Bangladesh, and finally sustainable remedial measures of arsenic have been proposed. This study suggests that laboratory facilities for testing of arsenic and effects of enhanced groundwater pumping, phosphate fertilizer etc., need to be updated, expanded and studied. This review work is significant to further knowledge improvement, as the topic is general and worldwide. It can be concluded that the integration of the proposed remedial measures with the national geographic information system interface database relating to arsenic for analysis, production of hazard maps, and dissemination on television show for the planners, engineers, managers, field supervisors and affected people, can reach at the sustainable solution for mitigating arsenic and associated problems successfully in Bangladesh.     

Observations of a stationary mid-latitude cloud system on Titan

We report the observation of a cloud system on Titan that remained localized near 40°S latitude and 60°W longitude for at least 34 h. Ground-based observations obtained with the SINFONI imaging spectrograph at the Very Large Telescope over four consecutive nights recorded the lifetime and altitude of the unresolved cloud system. Concomitant measurements made by Cassini/VIMS over 3 h resolved changes in the altitude and opacity of individual regions within the system during this time. Clouds are measured from 13 to 37 km altitude with optical depths per pixel ranging from τ=0.13 to 7. Short timescale rise times are consistent with previous measurements of the evolution of mid-latitude clouds; however the long timescale localization of the cloud structure is unexplained. We speculate about the role of mesoscale circulation in relation to cloud formation.     

A study of the photometric system of the Kiev network telescope

We performed a series of CCD observations in BVRI bands of a celestial region in cluster M67 (NGC 2682) to study the photometric system of the Kyiv network telescope. The signal recording system consists of a CGE-1400 telescope, Celestron #94175 focal reducer, an automatic turret with a set of UBVRI filters, and a Rolera Mgi CCD camera. The operating field of the system is 10.62′ × 10.62′. CCD images are processed in the MIDAS/ROMAFOT package. The reduction coefficients of the instrumental photometric system relative to Johnson’s BVRI system are determined. The resulted value of the module of distance to cluster M67 V ? M _V = 9.63 ^m does not contradict the results of other researchers. The mean square errors for one determination of stellar magnitude for different bands are 0.02–0.12 ^m . The errors in determining equatorial coordinates in the TYCHO-2 catalog system are ± 1″.     

Effect of nutrient loading on Atlantic menhaden (<Emphasis Type="Italic">Brevoortia tyrannus</Emphasis>) growth rate potential in the Patuxent River

We linked a 2-dimensional water quality model of the Patuxent River with a spatially-explicit model of fish growth to simulate how changes in land use in the Patuxent River Basin would affect the growth rate potential (GRP) of Atlantic menhaden (Brevoortia tyrannus). Simulations of three land-use patterns that reflected current nutrient loadings, increased nutrient loadings, and decreased nutrient loadings were used to drive the water quality model. Changes in nutrient loadings caused changes in the timing and intensity of phytoplankton concentrations and the region of hypoxia increased during summer with increased nutrient loading. The spatial distribution of menhaden GRP was highly correlated with phytoplankton concentrations and localized in the middle on third of the Patuxent River. Menhaden growth rate was highest in early June and late summer. During June, menhaden GRP (and phytoplankton concentration) was lowest at the lower nutrient loading simulation. During late summer, mean menhaden growth rates were inversely proportional to nutrient loading rates and menhaden grew best when nutrient loadings were the lowest. Upriver to mid-river phytoplankton patches drove overall mean calculations. Model results suggest that more research is needed on water quality model predictions of phytoplankton levels at a high level of spatial and temporal resolution, menhaden foraging, and menhaden habitat selection.