Anticlockwise pressure–temperature paths record Variscan upper‐plate exhumation: Example from micaschists of the Porto Vecchio region,Corsica

To better understand the evolution of deep‐seated crust of the Variscan orogen in the Sardinia‐Corsica region, we studied garnet‐bearing micaschists which were sampled 3 km east and 15 km northeast of Porto Vecchio, south‐eastern Corsica. After a careful investigation of the textural relations and compositions of minerals, especially of zoned garnet, a P–T path was reconstructed using contoured P–T pseudosections. U–Th–Pb dating of monazite in the micaschists was undertaken with the electron microprobe. The micaschists from both localities were formed along similar anticlockwise P–T paths. The prograde branch of these paths starts at 3 kbar close to 600°C in the P–T field of sillimanite and reaches peak conditions at 7 kbar and 600 (15 km NE of Porto Vecchio) to 630°C (3 km E of Porto Vecchio). The metamorphism at peak P–T conditions happened c. 340 Ma based on low‐Y (<0.65 wt% Y₂O₃) monazite. Ages of monazite with high‐Y contents (>2 wt% Y₂O₃), which probably have formed before garnet, scatter around 362 Ma. The retrograde branch of the P–T paths passes through 4 kbar at ~550°C. We conclude that the micaschists belong to a common metasedimentary sequence, which extends over the Porto Vecchio region and is separated from other metamorphic rock sequences in the north and the south by major tectonic boundaries. This sequence had experienced peak pressures which are lower than those determined for metamorphic rocks, such as micaschist and gneiss, from north‐eastern Sardinia. At present, we favour a continent–continent collisional scenario with the studied metasedimentary sequence buried during the collisional event as part of the upper plate. The contemporaneous high‐P metamorphic rocks from NE Sardinia were part of the upper portion of the lower plate. The addressed rocks from both plates were exhumed in an exhumation channel.     

A Method for Modeling of a Creeping Slope with a Visco-Hypoplastic Material Law

This paper presents the numerical simulation of a creeping slope in Upper Austria, using a visco-hypoplastic material law which describes the mechanical behavior of cohesive soils allowing for viscous effects, i.e. creep and relaxation. The method consists of: (1) determination of the parameters of the material law, based on laboratory tests on soil samples taken from the slope; (2) simulation of the laboratory tests with an element test program in which the used material law was implemented, in order to test whether the model holds for the soils studied; and (3) simulation of slope movements at different sections along the slope, assuming an infinite slope. The simulation results fit well with the field measurements. This demonstrates that despite strongly simplified boundary conditions and limited availability of subsurface data (e.g. density) the visco-hypoplastic law is a promising tool for predicting creep movements.     

Numerical simulation of Qiaotou Landslide deformation caused by drawdown of the Three Gorges Reservoir,China

Landslides located beside reservoirs tend to be unstable or are characterized by large deformation during the drawdown process. This has been accepted by many experts. In this paper, we use Qiaotou Landslide, which is located beside the Three Gorges Reservoir (TGR), as a typical case study to investigate and predict the deformation mechanism during the drawdown process of TGR in detail. According to field investigation, the landslide mass is mainly composed of thick, loose silt and clay mixed with fragments of rock. Bedrock is mainly composed of silty sandstone. Field and laboratory tests indicate that the landslide mass has a high permeability coefficient. If the water level declines fast, intense seepage force may result. Based on these data, we establish a three-dimensional geological model of Qiaotou Landslide by FLAC^3D and perform a numerical simulation using the saturated–unsaturated fluid–solid coupling theory. For the simulation, we assume that the drawdown from 175 to 145 m takes place with a speed of 25 cm/day, which is based on the extreme water level regulation program of TGR. The simulation shows that this causes a significant deformation in the landslide mass and that the maximum displacement within the landslide is 24.2 cm. During the drawdown process, the maximum displacement zone is shifting from the upper part of the landslide where bedrock surface is steeper and thickness of loose deposits is less to the middle part of the landslide where bedrock surface is less steep and thickness of loose deposits is higher. The deformation mechanism indicates that in the early stage of the drawdown the deformation of the landslide mass is mainly caused by seepage and in the later stage mainly by consolidation.     

Robust landslide susceptibility analysis by combination of frequency ratio,heuristic GIS-methods and ground truth evaluation for a mountainous study area with poor data availability in the Three Gorges Reservoir area,PR China

Increasing number of geohazards, like mass movements, is one of the main environmental impacts following the impoundment of the Yangtze River and its tributaries due to the inventory of the Three Gorges Dam hydroelectric power plant. Although many cities and settlements are endangered, no detailed hazard mapping is possible because of the huge size of the affected area. Due to strongly limited data availability, a robust landslide susceptibility model was established exemplarily for the Xiangxi catchment as one of the main tributaries. The analyses were limited to translational, rotational and combined landslides in soft rock sediments because these represent the main types of mass movement activity in this area. The qualitative landslide susceptibility analysis was carried out by a combination of frequency ratio analyses and a heuristic iterative index-based method using a Geographical Information System. As conditioning factors, the parameters lithology, slope angle, -aspect, -curvature, drainage buffer distance and land use were applied. To improve the objectivity of the index-based method, the results of frequency ratio analyses were taken into consideration to assess the importance of each factor. Model verification and evaluation by ground truth enable to improve the model by iterative calculations and to identify the best performance model. Results indicate that 89 % of all known landslides are located within areas showing high susceptibility according to the best performance model. The study demonstrates that a rather simple but robust model achieves good results and is applicable for regional landslide susceptibility analyses in mountainous areas with poor data availability.     

New calibrating functions for short-period body waves of Friuli earthquakes

n¶rt; auau uu ¶rt; mnu¶rt; n, n, g, Sg, m anmam anauu ¶rt; numa amu 2.6° ¶rt; 4.7° m aa amu uu (mau). aa, m m auum _Sg(D) mam mua ¶rt; m n¶rt;u aum¶rt; uma a uu mu.     

Neoproterozoic/Lower Palaeozoic Events in Central Dronning Maud Land (East Antarctica)

New geochronological data indicate that central Dronning Maud Land in East Antarctica underwent polyphase Neoproterozoic/Lower Palaeozoic metamorphism that can be correlated with the final amalgamation of E- and W-Gondwana. Central Dronning Maud Land most probably represents part of the southern continuation of the Mozambique Belt into E-Antarctica. The Neoproterozoic/Lower Palaeozoic metamorphism is preceded by a period of anorogenic anorthosite-charnockite magmatism at ca. 600 Ma. Polyphase metamorphism is recorded from ca. 580 to 515 Ma. Voluminous syntectonic magmatism has been documented at ca. 530 Ma, which is probably the most voluminous Neoproterozoic/Lower Palaeozoic syntectonic magmatism so far recorded in E-Antarctica. The Neoproterozoic/Lower Palaeozoic structural evolution evolved in an overall sinistral transpressional setting, and thus can be correlated with the broad tectonic setting of the Mozambique Belt in Africa.     

Supercooled diopside melt: confirmation of temperature-dependent expansivity using container-based dilatometry

The expansivity of supercooled diopside liquid has been determined using techniques of container-based dilatometry. Two thermal strategies have been employed, one in which the sample is brought to volumetric equilibrium by long-duration dwells at low temperatures (817 °C) and one in which scanning dilatometry of the sample has been performed at somewhat higher temperatures (890–913 °C). The results of both experiments yield a supercooled liquid expansivity for diopside liquid in the temperature range of 817–913 °C of 84.4 ± 2.8 × 10⁻⁴ cm³/mol K. The expansivity is 65% higher than that obtained for diopside melt obtained at superliquidus temperatures using the double bob Archimedean method. Combined fitting of the new low temperature, volume–temperature data from the present study and the superliquidus data from the literature has been performed. The combined fit yields the following equations for the volume–temperature relationship of diopside liquid (T=temperature in °C):

Die Bedeutung der Strömung für die Biozönose in Rhithron und Potamon

Ohne Zusammenfassung     

Distribution of sedimentary organic matter in Anisian carbonate series of S Poland: evidence of third-order sea-level fluctuations

The stratigraphic distribution of sedimentary organic matter in Anisian carbonate series of southern Poland is studied with respect to relative sea-level fluctuations. Palynofacies patterns clearly reflect transgressive–regressive trends that are interpreted in terms of third-order cyclicity. Major flooding phases are detected by maximum abundance of marine plankton in the upper Bithynian and Pelsonian. Transgressive and highstand deposits are recognized by changes in the terrestrial input of organic particles and the relative percentages and diversity of the plankton group. The palynological data support the sequence stratigraphic interpretation based on sedimentological features and geochemical signatures. The corresponding eustatic signals of sedimentary and organic facies are discussed. The study highlights the potential of palynofacies analysis for sequence stratigraphical interpretation.     

A parallel block preconditioner for large-scale poroelasticity with highly heterogeneous material parameters

Large-scale simulations of coupled flow in deformable porous media require iterative methods for solving the systems of linear algebraic equations. Construction of efficient iterative methods is particularly challenging in problems with large jumps in material properties, which is often the case in realistic geological applications, such as basin evolution at regional scales. The success of iterative methods for such problems depends strongly on finding effective preconditioners with good parallel scaling properties, which is the topic of the present paper. We present a parallel preconditioner for Biot’s equations of coupled elasticity and fluid flow in porous media. The preconditioner is based on an approximation of the exact inverse of the two-by-two block system arising from a finite element discretisation. The approximation relies on a highly scalable approximation of the global Schur complement of the coefficient matrix, combined with generally available state-of-the-art multilevel preconditioners for the individual blocks. This preconditioner is shown to be robust on problems with highly heterogeneous material parameters. We investigate the weak and strong parallel scaling of this preconditioner on up to 512 processors and demonstrate its ability on a realistic basin-scale problem in poroelasticity with over eight million tetrahedral elements.