A method of calculating the non‐linear seismic response of a building braced with viscoelastic dampers

Buildings are continually subject to dynamic loads, such as wind load, seismic ground motion, and even the load from internal utility machines. The recent trend of constructing more flexible high‐rise buildings underscores the importance of including viscoelastic dampers in building designs. Viscoelastic dampers are used to control the dynamic response of a building. If the seismic design is based only on the linear response spectrum, considerable error may occur when calculating the seismic response of a building; rubber viscoelastic dampers show non‐linear hysteretic damping that is quite different from viscous damping. This study generated a non‐linear response spectrum using a non‐linear oscillator model to simulate a building with viscoelastic dampers installed. The parameters used in the non‐linear damper model were obtained experimentally from dynamic loading tests. The results show that viscoelastic dampers effectively reduce the seismic displacement response of a structure, but transmit more seismic force to the structure, which essentially increases its seismic acceleration response. Copyright © 2003 John Wiley & Sons, Ltd.     

Évolution thermique des séries sédimentaires de la Marge ardéchoise : étude pétrographique de la matière organique et des argilesThermal evolution of the sedimentary series of the Ardèche Margin: petrological studies of organic matter and clays

Two wells, Balazuc (BA1) and Morte-Mérie (MM1), located in a confined area (1200 m apart) and separated by the Uzer fault (a Liassic structure with a dip fault of 1300 m) were analysed using conventional methodologies and techniques (PRV, TAI, XRD, STEM) in order to compare the diagenetic evolution of clays and organic matter. The thermal convective process allows the circulation of hot fluids and the oxidation of organic matter. The conductive process allows the maturation of the organic matter, the expulsion of hydrocarbons and the deposit of pyrobitumes in the migration channels. To cite this article: L. Martinez et al., C. R. Geoscience 334 (2002) 1021–1028.     

Influence de la microporosité sur le piégeage du gaz dans un milieu poreux naturel

Trapped-gas content in natural porous media, also called residual gas saturation (Sgr), corresponds to the imbibition end-point. To define the parameters controlling Sgr, two parameters were studied: the influence of rock characteristics (on 400 sandstone samples) and initial gas saturation (Sgi), on the basis of 60 experimental curves between Sgr and Sgi. Based on an extensive experimental database, this study establishes the dominant influence of microporosity on trapped gas saturation, and indirectly that of the contained clays. To cite this article: K. Suzanne, J. Billiotte, C. R. Geoscience 336 (2004).     

Horizontal patterns of water temperature and salinity in an estuarine tidal channel: Ria de Aveiro

This work presents results from two complementary and interconnected approaches to study water temperature and salinity patterns in an estuarine tidal channel. This channel is one of the four main branches of the Ria de Aveiro, a shallow lagoon located in the Northwest coast of the Iberian Peninsula. Longitudinal and cross-sectional fields of water temperature and salinity were determined by spatial interpolation of field measurements. A numerical model (Mohid) was used in a 2D depth-integrated mode in order to compute water temperature and salinity patterns. The main purpose of this work was to determine the horizontal patterns of water temperature and salinity in the study area, evaluating the effects of the main forcing factors. The field results were depth-integrated and compared to numerical model results. These results obtained using extreme tidal and river runoff forcing, are also presented. The field results reveal that, when the river flow is weak, the tidal intrusion is the main forcing mechanism, generating saline and thermal fronts which migrate with the neap/spring tidal cycle. When the river flow increases, the influence of the freshwater extends almost as far as the mouth of the lagoon and vertical stratification is established. Results of numerical modelling reveal that the implemented model reproduces quite well the observed horizontal patterns. The model was also used to study the hydrology of the study area under extreme forcing conditions. When the model is forced with a low river flow (1 m³ s⁻¹) the results confirm that the hydrology is tidally dominated. When the model is forced with a high river flow (1,000 m³ s⁻¹) the hydrology is dominated by freshwater, as would be expected in such an area.     

Analysis of gravity source moment inversion. Part I: Using noa priori information about the source

A generic gravity source moment is an integral, over the source volume, of the product of the density distribution by a polynomia in the Cartesian coordinates of a point belonging to this volume. We obtained a formal expression for a generic moment in terms of integrals involving the gravity anomaly and the gravity potential. By analyzing the conditions under which this expression is valid, we conclude that, without usinga priori information regarding the sources, it is possible to determine, from the gravity anomaly, any moment or linear combination of moments whose associated polynomial has null Laplacian and depends only on the coordinates defining the measurement plane. Additionally, no moment whose associated polynomial has a nonnull laplacian can be determined without usinga priori information of the source.     

Transformation of Monoaromatic hydrocarbons to organic acids in anoxic groundwater environment

The transformation of benzene and a series of alkylbenzenes was studied in anoxic groundwater of a shallow glacial-outwash aquifer near Bemidji, Minnesota, U.S.A. Monoaromatic hydrocarbons, the most water-soluble components of crude oil, were transported downgradient of an oil spill, forming a plume of contaminated groundwater. Organic acids that were not original components of the oil were identified in the anoxic groundwater. The highest concentrations of these oxidized organic compounds were found in the anoxic plume where a decrease in concentrations of structurally related alkylbenzenes was observed. These results suggest that biological transformation of benzene and alkylbenzenes to organic acid intermediates may be an important attenuation process in anoxic environments. The transformation of a complex mixture of hydrocarbons to a series of corresponding oxidation products in an anoxic subsurface environment provides new insight into in situ anaerobic degradation processes.     

Geomagnetic quiet day selection

Based on published literature and the response to a questionnaire sent to geomagnetic field, ionospheric and magnetospheric researchers, several methods of choosing periods of quiet conditions based on geomagnetic records, as well as other observed parameters, have been identified. Caveats with respect to using geomagnetic indices to select quiet periods include the following:

Urban Thermodynamic Island in a Coastal City Analysed from an Optimized Surface Network

Within the framework of ESCOMPTE, a French experiment performed in June and July 2001 in the south-east of France to study the photo-oxidant pollution at the regional scale, the urban boundary layer (UBL) program focused on the study of the urban atmosphere over the coastal city of Marseille. A methodology developed to optimize a network of 20 stations measuring air temperature and moisture over the city is presented. It is based on the analysis of a numerical simulation, performed with the non-hydrostatic, mesoscale Meso-NH model, run with four nested-grids down to a horizontal resolution of 250 m over the city and including a specific parametrization for the urban surface energy balance. A three-day period was modelled and evaluated against data collected during the preparatory phase for the project in summer 2000. The simulated thermodynamic surface fields were analysed using an empirical orthogonal function (EOF) decomposition in order to determine the optimal network configuration designed to capture the dominant characteristics of the fields. It is the first attempt of application of this kind of methodology to the field of urban meteorology. The network, of 20 temperature and moisture sensors, was implemented during the UBL-ESCOMPTE experiment and continuously recorded data from 12 June to 14 July 2001. The measurements were analysed in order to assess the urban thermodynamic island spatio-temporal structure, also using EOF decomposition. During nighttime, the influence of urbanization on temperature is clear the field is characterized by concentric thermo-pleths around the old core of the city, which is the warmest area of the domain. The moisture field is more influenced by proximity to the sea and airflow patterns. During the day, the sea breeze often moves from west or south-west and consequently the spatial pattern for both parameters is characterized by a gradient perpendicular to the shoreline. Finally, in order to assess the methodology adopted, the spatial structures extracted from the simulation of the 2000 preparatory campaign and observations gathered in 2001 have been compared. They are highly correlated, which is a relevant validation of the methodology proposed. The relations between these spatial structures and geographical characteristics of the site have also been studied. High correlations between temperature spatial structure during nighttime and urban cover fraction or street aspect ratio are observed and simulated. For temperature during daytime or moisture during both daytime and nighttime these geographical factors are not correlated with thermodynamic fields spatial structures.